CCNA Cisco Certified Network Associate Study Guide - FTP Server

640 Appendix C � Commands in This Study Guide
Command Description Chapter
interface fastethernet
0/0.1
interface fastethernet
0/26
interface s0.16
multipoint
interface s0.16 pointto-point
Creates a subinterface 4
Configures interface f0/26 App. B
Creates a multipoint
subinterface on a serial link
that can be used with Frame
Relay networks
Creates a point-to-point
subinterface on a serial link
that can be used with Frame
Relay
interface serial 5 Puts you in configuration
mode for interface serial 5
and can be used for show
commands
ip access-group Applies an IP access list to an
interface
ip address Sets an IP address on an
interface or a switch
ip classless Is a global configuration
command used to tell a
router to forward packets to
a default route when the
destination network is not in
the routing table
ip default-gateway Sets the default gateway of
the switch
ip domain-lookup Turns on DNS lookup
(which is on by default)
ip domain-name Appends a domain name to a
DNS lookup
10
10
4
9
4, App. B
5
App. B
7
7