CCNA Cisco Certified Network Associate Study Guide - FTP Server

Command Description Chapter
exec-timeout Sets the timeout in seconds
and minutes for the console
connection
exit Disconnects a connection to
a remote router via Telnet
frame-relay
interface-dlci
Configures the PVC address
on a serial interface or
subinterface
frame-relay lmi-type Configures the LMI type on
a serial link
frame-relay map
protocol address
Creates a static mapping for
use with a Frame Relay
network
Host Specifies a single host address 9
hostname Sets the name of a router or a
switch
int e0.10 Creates a subinterface 8
4
7
10
10
10
4, App. B
int f0/0.1 Creates a subinterface App. B
interface Puts you in interface
configuration mode. Also
used with show commands
interface e0/5 Configures Ethernet
interface 5
4
App. B
interface ethernet 0/1 Configures interface e0/1 App. B
interface f0/26 Configures FastEthernet
interface 26
interface fastethernet
0/0
Puts you in interface
configuration mode for a
FastEthernet port. Also used
with show commands
App. B
4
639