05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

618 Appendix B � Configuring the Catalyst 1900 Switch<br />

Lab B.4: Assigning VLANs to Switch Ports<br />

In this lab, you will configure two ports of the switch to be a member of each<br />

VLAN.<br />

1. Configure ports 1 and 2 to be in VLAN 2. Remember that all ports are<br />

in VLAN 1 unless set differently.<br />

1900A#config t<br />

Enter configuration commands, one per line. End<br />

with CNTL/Z<br />

1900A(config)#int e0/1<br />

1900A(config-if)#vlan-membership static 2<br />

1900A(config-if)#int e0/2<br />

1900A(config-if)#vlan-membership static 2<br />

2. Assign ports 3 and 4 to be in VLAN 3.<br />

1900A(config-if)#int e0/3<br />

1900A(config-if)#vlan-membership static 3<br />

1900A(config-if)#int e0/4<br />

1900A(config-if)#vlan-membership static 3<br />

Assign ports 5 and 6 to be in VLAN 4.<br />

1900A(config-if)#int e0/5<br />

1900A(config-if)#vlan-membership static 4<br />

1900A(config-if)#int e0/6<br />

1900A(config-if)#vlan-membership static 4<br />

Assign ports 7 and 8 to be in VLAN 5.<br />

1900A(config-if)#int e0/7<br />

1900A(config-if)#vlan-membership static 5<br />

1900A(config-if)#int e0/8<br />

1900A(config-if)#vlan-membership static 5<br />

1900A(config-if)#exit<br />

1900A(config)#exit

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!