05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Hands-on Labs<br />

Hands-on Labs 613<br />

There are seven hands-on labs in this section. You need to have access<br />

to a 1900 switch. However, you can use the Sybex <strong>CCNA</strong> e-trainer for the<br />

first two labs, or the RouterSim version 2.0 product found at<br />

www.routersim.com to complete all of these labs.<br />

Lab B.1: Managing the 1900 Switch<br />

Lab B.2: 1900 Switch Operations<br />

Lab B.3: Creating VLANs<br />

Lab B.4: Assigning VLANs to Switch Ports<br />

Lab B.5: Configuring Trunking<br />

Lab B.6: Configuring VTP<br />

Lab B.7: Configuring Inter-VLAN Routing with ISL<br />

Lab B.1: Managing the 1900 Switch<br />

In this lab, you will connect to the <strong>Cisco</strong> Catalyst 1900 switch and manage<br />

the switch features.<br />

1. From your 1900 switch, type K to enter into CLI mode.<br />

2. From the 1900 CLI, press Enter and then from the user mode prompt<br />

(>), type enable.<br />

3. Type show running-config to view the current configuration. Notice<br />

the default settings.<br />

4. Type show version to view the IOS version running on the switch.<br />

5. Set the name of the router by using the hostname command:<br />

config t<br />

hostname 1900A<br />

6. Type show ip to see the default IP address, subnet mask, and default<br />

gateway settings.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!