05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

534 Chapter 10 � Wide Area <strong>Network</strong>ing Protocols<br />

9. If you wanted to view the DLCI numbers configured for your Frame<br />

Relay network, which command would you use? (Choose all that<br />

apply.)<br />

A. sh frame-relay<br />

B. show running<br />

C. sh int s0<br />

D. sh frame-relay dlci<br />

E. sh frame-relay pvc<br />

10. What is IARP used for?<br />

A. Mapping X.121 addresses to X.25 addresses<br />

B. Mapping DLCIs to network protocol addresses<br />

C. SMDS addressing<br />

D. Mapping ATM addresses to virtual addresses<br />

11. What does the ISDN Basic Rate Interface (BRI) provide?<br />

A. 23 B channels and one 64Kbps D channel<br />

B. Total bit rate of up to 1.544Mbps<br />

C. Two 56Kbps B channels and one 64Kbps D channel<br />

D. Two 64Kbps B channels and one 16Kbps D channel<br />

12. What is true about Frame Relay DLCI?<br />

A. DLCI is optional in a Frame Relay network.<br />

B. DLCI represents a single physical circuit.<br />

C. DLCI identifies a logical connection between DTE devices.<br />

D. DLCI is used to tag the beginning of a frame when using LAN<br />

switching.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!