05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

526 Chapter 10 � Wide Area <strong>Network</strong>ing Protocols<br />

Lab 10.2: Configuring and Monitoring HDLC<br />

There is no configuration for HDLC, but if you completed Lab 10.1, then the<br />

PPP encapsulation would be set on both routers. This is why I put the PPP lab<br />

first. This allows you to actually configure HDLC encapsulation on a router.<br />

This second lab will use the same Figure 10.8 as Lab 10.1 used.<br />

1. Set the encapsulation for each serial interface by using the<br />

encapsulation hdlc command.<br />

RouterA#config t<br />

RouterA(config)#int s0<br />

RouterA(config-if)#encapsulation hdlc<br />

RouterB#config t<br />

RouterB(config)#int s0<br />

RouterB(config-if)#encapsulation hdlc<br />

2. Verify the HDLC encapsulation by using the show interface s0<br />

command on each router.<br />

Lab 10.3: Configuring Frame Relay and Subinterfaces<br />

FIGURE 10.9 Frame Relay lab<br />

This lab will use Figure 10.9 to describe and configure Frame Relay<br />

configurations.<br />

E0<br />

S0<br />

S0 S1<br />

DLCI 102 DLCI 201<br />

S0<br />

E0

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!