CCNA Cisco Certified Network Associate Study Guide - FTP Server

Commands in This Chapter
Command Description
debug dialer Shows you the call setup and
teardown procedures
Summary 519
debug frame-relay lmi Shows the lmi exchanges between
the router and the Frame Relay
switch
debug isdn q921 Shows layer-2 processes
debug isdn q931 Shows layer-3 processes
dialer idle-timeout number Tells the BRI line when to drop if
no interesting traffic is found
dialer list number protocol
protocol permit/deny
dialer load-threshold number
inbound/outbound/either
dialer map protocol address
name hostname number
Specifies interesting traffic for a
DDR link
Sets the parameters that describe
when the second BRI comes up on
a ISDN link
Used instead of a dialer string to
provide more security in an ISDN
network
dialer-string Sets the phone number to dial for a
BRI interface
encapsulation frame-relay Changes the encapsulation to
Frame Relay on a serial link
encapsulation frame-relay
ietf
Sets the encapsulation type to the
Internet Engineering Task Force
(IETF). Connects Cisco routers to
off-brand routers.
encapsulation hdlc Restores the default encapsulation
of HDLC on a serial link
encapsulation ppp Changes the encapsulation on a
serial link to PPP