CCNA Cisco Certified Network Associate Study Guide - FTP Server

502 Chapter 10 � Wide Area Networking Protocols
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 0
Router#
The router output from the show frame-relay lmi command shows you
LMI errors as well as the LMI type.
Show Frame-Relay Pvc
The show frame pvc command will list all configured PVCs and DLCI numbers.
It provides the status of each PVC connection and traffic statistics. It
will also give you the number of BECN and FECN packets received on the
router.
RouterA#sho frame pvc
PVC Statistics for interface Serial0 (Frame Relay DTE)
DLCI = 16,DLCI USAGE = LOCAL,PVC STATUS =ACTIVE,INTERFACE
= Serial0.1
input pkts 50977876 output pkts 41822892 in bytes
3137403144
out bytes 3408047602 dropped pkts 5 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 9393 out DE pkts 0
pvc create time 7w3d, last time pvc status changed 7w3d
DLCI = 18,DLCI USAGE =LOCAL,PVC STATUS =ACTIVE,INTERFACE =
Serial0.3
input pkts 30572401 output pkts 31139837 in bytes
1797291100
out bytes 3227181474 dropped pkts 5 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 28 out DE pkts 0
pvc create time 7w3d, last time pvc status changed 7w3d