05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Written Lab<br />

In this section, write the answers to the following questions:<br />

Written Lab 461<br />

1. Configure a standard IP access list to prevent all machines on network<br />

172.16.0.0 from accessing your Ethernet network.<br />

2. Apply the access list to your Ethernet interface.<br />

3. Create an access list that denies host 196.22.15.5 access to your Ethernet<br />

network.<br />

4. Write the command to verify that you’ve entered the access list<br />

correctly.<br />

5. Write the two commands that verify the access list was properly<br />

applied to the Ethernet interface.<br />

6. Create an extended access list that stops host 172.16.10.1 on Ethernet<br />

0 from telnetting to host 172.16.30.5 on Ethernet 1.<br />

7. Apply the access list to the correct interface.<br />

8. Configure an IPX SAP access list that prevents any file service SAP<br />

messages other than those from IPX address 45.0000.0000.0001<br />

from leaving the Ethernet 0 network.<br />

9. Apply the IPX SAP access list to the Ethernet interface.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!