05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

402 Chapter 8 � Configuring Novell IPX<br />

2501A(config-if)#ipx network 10<br />

2501A(config-if)#int s0<br />

2501A(config-if)#ipx network 20<br />

That’s all you need to do to configure IPX on the 2501A router. Much<br />

easier than IP, isn’t it?<br />

Configuring IPX on the 2501B Router<br />

To configure IPX routing on the 2501B router, you need to configure three<br />

interfaces. Interface Ethernet 0 is on network 30, interface serial 0 is on IPX<br />

network 20 and int serial 1 is on network 40.<br />

Here is the configuration for the 2501B router:<br />

2501B(config)#ipx routing<br />

2501B(config)#int e0<br />

2501B(config-if)#ipx network 30<br />

2501B(config-if)#int s0<br />

2501B(config-if)#ipx network 20<br />

2501B(config-if)#int s1<br />

2501B(config-if)#ipx network 40<br />

That is all you need to do to configure IPX on the 2501B router.<br />

Configuring IPX on the 2501C Router<br />

To configure IPX routing on the 2501C router, you need to configure interface<br />

Ethernet 0 into IPX network 50 and interface serial 0 into IPX<br />

network 40.<br />

Here is the configuration for the 2501C router:<br />

2501C(config)#ipx routing<br />

2501C(config)#int e0<br />

2501C(config-if)#ipx network 50<br />

2501C(config-if)#int s0<br />

2501C(config-if)#ipx network 20<br />

All four of the routers are now configured and should be up and working.<br />

The best way to verify the configuration is with the show ipx route<br />

command.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!