05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Answers to Review Questions<br />

Answers to Review Questions 323<br />

1. D. Switches do not propagate VLAN information by default; you<br />

must configure the VTP domain. Virtual Trunk Protocol (VTP) is used<br />

to propagate VLAN information across a trunked link.<br />

2. B, C. You can configure VLAN memberships on a port either statically<br />

or dynamically.<br />

3. B. An ISL frame can be up to 1522 bytes.<br />

4. D. A VMPS server must be configured with the hardware addresses of<br />

all hosts on the internetworks.<br />

5. C, D. VTP is not right because it has nothing to do with trunking,<br />

except that it sends VLAN information across a trunked link. Trunk<br />

protocol and ISL are used to configure trunking on a port.<br />

6. B, D. Pruning is disabled by default on all switches. However, if you<br />

turn on pruning on one VTP server switch, the entire VTP domain is<br />

pruning.<br />

7. A. Inter-Switch Link (ISL) encapsulates a frame with new header and<br />

CRC information.<br />

8. A. The transparent switch is a stand-alone switch that can be connected<br />

to your network for management. It does not add VLAN information<br />

to its VLAN database, nor does it share its configured VLAN<br />

information. It will pass VLAN-received trunked ports out a different<br />

trunked port if configured.<br />

9. B, C, D, E, F, G. VTP is used if you have multiple switches and your<br />

network has multiple VLANs configured. VTP can help you have a<br />

stable, consistent VLAN database in all your servers.<br />

10. A. All <strong>Cisco</strong> switches are VTP servers by default. No other VTP information<br />

is configured on a <strong>Cisco</strong> switch by default.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!