CCNA Cisco Certified Network Associate Study Guide - FTP Server

Summary
Summary 213
In this chapter, we introduced you to the Cisco Internetwork Operating
System (IOS). It is important that you have a firm understanding of the
basics offered in this chapter before you move on to the other chapters in
this book. The basics of Cisco routers covered in this chapter include the
following:
� Understanding the Cisco Internetwork Operating System (IOS) and
how you can use the IOS to run and configure Cisco routers
� Connecting to a router with console connections and LAN connections
� Bringing up a router and entering setup mode
� Logging into a router and understanding the difference between user
mode and privileged mode
� Understanding router prompts within router configuration mode
� Understanding editing and help features available from the router CLI
� Gathering basic routing information using the show commands
� Setting router passwords for both usermode and privileged mode
access
� Setting router banners for identification
� Performing interface configurations to set the IP address on an interface
� Setting router hostnames for router identification
� Setting interface descriptions to identify each interface on a router
� Viewing and saving router configurations using the show commands
and the copy run start command
� Verifying routing configurations using show commands