CCNA Cisco Certified Network Associate Study Guide - FTP Server

Assessment Questions
Assessment Questions xli
1. Where would a router boot from if a configuration register was set to
0x0101?
A. Flash
B. ROM
C. Boot ROM
D. NVRAM
2. Which of the following is a valid SAP filter 1010 placed on Ethernet 0?
A. ip access-group 1010 in
B. ip access-group 1010 out
C. ipx access-group 1010 in
D. ipx input-sap-filter 1010
E. ipx input-sap-filter 1010 in
3. What is a TE2 device used for in an ISDN connection?
A. Connecting an NT2 device to a U reference point
B. Connecting an S/T interface to a U reference point
C. Connecting a non-ISDN terminal to ISDN through a TA
D. Connecting to ISDN through a four-wire, twisted-pair digital link
4. What is the correct command to set the router identification to the
name Atlanta, which an administrator would see when connecting
with Telnet or through the console?
A. Description Atlanta Router
B. Banner Motd $
C. Hostname Atlanta
D. Host name Atlanta
E. Set prompt Atlanta