05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Router(config)#int s0<br />

Router(config-if)#clock rate ?<br />

Speed (bits per second)<br />

1200<br />

2400<br />

4800<br />

9600<br />

19200<br />

38400<br />

56000<br />

64000<br />

72000<br />

125000<br />

148000<br />

250000<br />

500000<br />

800000<br />

1000000<br />

1300000<br />

2000000<br />

4000000<br />

Command-Line Interface 203<br />

Choose clockrate from list above<br />

Router(config-if)#clock rate 64000<br />

%Error: This command applies only to DCE interfaces<br />

Router(config-if)#int s1<br />

Router(config-if)#clock rate 64000<br />

It does not hurt anything to try and put a clock rate on an interface. Notice<br />

that the clock rate command is in bits per second.<br />

The next command you need to understand is the bandwidth command.<br />

Every <strong>Cisco</strong> router ships with a default serial link bandwidth of a T1, or<br />

1.544Mbps. However, understand that this has nothing to do with how data<br />

is transferred over a link. The bandwidth of a serial link is used by routing<br />

protocols such as IGRP, EIGRP, and OSPF to calculate the best cost to a

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!