05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

98 Chapter 2 � Switching Technologies<br />

13. C. Switches forward all frames that have an unknown destination<br />

address. If a device answers the frame, the switch will update the<br />

MAC address table to reflect the location of the device.<br />

14. D. FragmentFree looks at the first 64 bytes of a frame to make sure a<br />

collision has not occurred. It is sometimes referred to as modified cutthrough.<br />

15. D. By default, 1900 switches use the FragmentFree LAN switch type.<br />

The 1900 can use the store-and-forward method.<br />

16. D. The bridge ID is sent via a multicast frame inside a BPDU update.<br />

17. B. Root ports are determined by using the cost of a link to the root<br />

bridge.<br />

18. B. Only one root bridge can be used in any network.<br />

19. B, C. Broadcast storms and multiple frame copies are typically found<br />

in a network that has multiple links to remote locations without some<br />

type of loop-avoidance scheme.<br />

20. A. The default priorities on all switches are 32,768.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!