05.01.2013 Views

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

CCNA Cisco Certified Network Associate Study Guide - FTP Server

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

15. What is the default LAN switch type on a 1900 switch?<br />

A. Cut-through<br />

B. Store and forward<br />

C. FragmentCheck<br />

D. FragmentFree<br />

Review Questions 93<br />

16. How is the bridge ID of a switch communicated to neighboring<br />

switches?<br />

A. IP Routing<br />

B. STP<br />

C. During the four STP states of a switch<br />

D. Bridge Protocol Data Units<br />

E. Broadcasts during convergence times<br />

17. How is the root port on a switch determined?<br />

A. The switch determines the highest cost of a link to the root bridge.<br />

B. The switch determines the lowest cost of a link to the root bridge.<br />

C. The fastest BPDU transfer rate is determined by sending and<br />

receiving BPDUs between switches, and that interface becomes the<br />

root port.<br />

D. The root bridge will broadcast the bridge ID, and the receiving<br />

bridge will determine what interface this broadcast was received<br />

on and make this interface the root port.<br />

18. How many root bridges are allowed in a network?<br />

A. 10<br />

B. 1<br />

C. One for each switch<br />

D. 20

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!