3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group
3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group
3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Intel-based MEN<br />
<strong>3U</strong> CompactPCI and CompactPCI <strong>Express</strong><br />
Intel ® -based <strong>3U</strong> CompactPCI ® Boards<br />
A highlight of the MEN product range is the Intel ® -based <strong>3U</strong> CompactPCI ® product family. <strong>The</strong> performance of these<br />
boards ranges from the latest Core TM 2 <strong>Duo</strong> (2.2 GHz) down to the ultra low power Celeron ® M 373 (1.0 GHz).<br />
Thanks to this family concept, expensive and time-consuming system adaptations are not needed anymore.<br />
<strong>The</strong> intercompatible Intel ® -based boards enable a smooth migration to the next higher processor generation.<br />
Existing system and software solutions can be continued to be used. If the performance of a running system has to<br />
be increased the existing single-board computer can be replaced by a new member of the MEN product family with<br />
a higher performance. A special feature of these Intel ® -based boards is the extendibility of the I/O functions using<br />
different side cards. Depending on requirements the performance range can be extended by additional legacy I/O<br />
interfaces, multimedia functions, additional USB interfaces or FireWire for fast data transfer. Long-term availability<br />
of at least five years from product start and RoHS conformity guarantee that the user’s project is future-safe which<br />
is a requirement in many embedded applications.<br />
Another product highlight based on Intel ® is the F11N. It is a perfect computing platform for infotainment, control<br />
or monitoring applications and combines the advantages of the FPGA technology and the low power versions of<br />
the Intel ® Celeron ® / Pentium ® III. Thanks to the Altera ® Cyclone TM FPGA customer-specific functions can be realized<br />
flexibly and individually on the board. Depending on requirements, the needed IP cores can be compiled from<br />
the MEN function library and be newly configured, combined with IP cores from other manufacturers or newly<br />
developed. Thanks to a long-term availability until at least 2011 and RoHS conformity the F11N ensures that the<br />
user’s project is future-safe.<br />
F18<br />
p. 5<br />
F17<br />
p. 6<br />
F15<br />
p. 7<br />
F14<br />
p. 8<br />
F600<br />
p. 9<br />
F601<br />
p. 10<br />
F603<br />
p. 11<br />
F604<br />
p. 12<br />
F11N<br />
p. 13<br />
Type<br />
<strong>SBC</strong><br />
<strong>SBC</strong><br />
<strong>SBC</strong><br />
<strong>SBC</strong> Up to Pentium M<br />
760, 2GHz or<br />
Celeron M 373,<br />
1GHz<br />
Side Card<br />
Legacy I/O<br />
F14..F18<br />
Side Card<br />
Multimedia<br />
F14..F18<br />
Side Card<br />
USB/COM<br />
F14..F18<br />
Side Card<br />
FireWire<br />
F14..F18<br />
<strong>SBC</strong><br />
CPU<br />
Intel Core 2 <strong>Duo</strong><br />
up to T7500,<br />
2.2GHz<br />
(64-bit CPU)<br />
Intel Core 2 <strong>Duo</strong><br />
up to T7400,<br />
2.16GHz<br />
(64-bit CPU)<br />
Intel Core <strong>Duo</strong> up<br />
to T2500, 2GHz<br />
ULV/ULP Pentium<br />
III / 933MHz<br />
Celeron 650MHz<br />
CompactPCI ®<br />
<strong>Express</strong><br />
32-bit/33MHz, PCI<br />
system slot, 1 cPCI<br />
slot or 1 cPCI <strong>Express</strong><br />
slot or stand-alone<br />
32-bit/33MHz, PCI<br />
system slot, 1 cPCI<br />
slot or 1 cPCI <strong>Express</strong><br />
slot or stand-alone<br />
32-bit/33MHz, PCI<br />
system slot, 1 cPCI<br />
slot or 1 cPCI <strong>Express</strong><br />
slot or stand-alone<br />
32-bit/33MHz, PCI<br />
system slot, 1 cPCI<br />
slot or 1 cPCI <strong>Express</strong><br />
slot or stand-alone<br />
4HP, connected to<br />
CompactPCI for<br />
power supply<br />
4HP or 8HP, connected<br />
to CompactPCI<br />
for power supply<br />
4HP, connected to<br />
CompactPCI for<br />
power supply<br />
4HP, connected to<br />
CompactPCI for<br />
power supply<br />
32-bit/33MHz<br />
PCI system slot,<br />
3 CompactPCI slots<br />
or stand-alone<br />
Memory<br />
max.<br />
4GB DDR2<br />
DRAM (soldered),<br />
CompactFlash or<br />
1.8” hard disk<br />
2GB DDR2<br />
DRAM (soldered),<br />
CompactFlash or<br />
1.8” hard disk<br />
2GB DDR2<br />
DRAM (soldered),<br />
CompactFlash or<br />
1.8” hard disk<br />
2GB DDR2<br />
DRAM (soldered),<br />
CompactFlash or<br />
1.8” hard disk<br />
512MB DRAM,<br />
2MB SRAM,<br />
CompactFlash<br />
Designed for: -40 to +85°C operation temperature,<br />
shock, drop, bump, vibration, humidity, chemical resistance<br />
Interfaces<br />
PCIe 6 x1, 2 SATA, 2 Gigabit<br />
Ethernet, 8 USB 2.0, 1 VGA,<br />
1/2 DVI, audio (via front,<br />
extension cards or rear I/O)<br />
PCIe 6 x1, 2 SATA, 2 Gigabit<br />
Ethernet, 8 USB 2.0, 1 VGA,<br />
1/2 DVI, audio (via front,<br />
extension cards or rear I/O)<br />
PCIe 6 x1, 2 SATA, 2 Gigabit<br />
Ethernet, 8 USB 2.0, 1 VGA,<br />
1/2 DVI, audio (via front,<br />
extension cards or rear I/O)<br />
PCIe 4 x1, 2 SATA, 2 Gigabit<br />
Ethernet, 8 USB 2.0, 1 VGA,<br />
1/2 DVI, audio (via front,<br />
extension cards or rear I/O)<br />
1..4 UARTs; via SA-Adapters<br />
(RS232/422/485, isolated/<br />
not isolated)<br />
1..2 DVI, 1 audio,<br />
0..1 COM via SA-Adapter<br />
(RS232/422/485, isolated/<br />
not isolated)<br />
2 USB 2.0, 1 COM<br />
1 IEEE 1394, 1 DVI-D, 1 HD<br />
audio, 1 COM<br />
2 Fast Ethernet, COM 1,<br />
USB 1.1, 2 CAN<br />
■ Up-to-date and more detailed data sheets (including description of configuration<br />
possibilities and options, ordering information, available accessories and software)<br />
under www.men.de/cpci<br />
Local<br />
Extensions<br />
I/O extension cards:<br />
F600..F604<br />
see below<br />
I/O extension cards:<br />
F600..F604<br />
see below<br />
I/O extension cards:<br />
F600..F604<br />
see below<br />
I/O extension cards:<br />
F600..F604<br />
see below<br />
2.5” SATA drive<br />
2.5” SATA drive<br />
2.5” SATA drive<br />
2.5” SATA drive<br />
FPGA for custom I/O,<br />
7 SA-Adapters,<br />
local hard disk<br />
Software<br />
Windows,<br />
Linux<br />
Windows,<br />
Linux<br />
Windows,<br />
Linux<br />
Windows,<br />
Linux,<br />
VxWorks, QNX<br />
Windows,<br />
Linux,<br />
VxWorks, QNX<br />
Windows,<br />
Linux,<br />
VxWorks, QNX<br />
Windows,<br />
Linux,<br />
VxWorks, QNX<br />
Windows,<br />
Linux,<br />
VxWorks, QNX<br />
Windows,<br />
Linux, VxWorks<br />
Applications<br />
Industrial autom.,<br />
robotics,<br />
instrumentation,<br />
multimedia<br />
Industrial autom.,<br />
robotics,<br />
instrumentation,<br />
multimedia<br />
Industrial autom.,<br />
robotics,<br />
instrumentation,<br />
multimedia<br />
Industrial autom.,<br />
robotics,<br />
instrumentation,<br />
multimedia<br />
Industrial autom.,<br />
robotics,<br />
instrumentation<br />
Industrial autom.,<br />
robotics,<br />
instrumentation<br />
Industrial autom.,<br />
robotics,<br />
instrumentation<br />
Industrial autom.,<br />
robotics,<br />
instrumentation<br />
Transportation,<br />
mobile<br />
computing,<br />
industrial autom.