3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group

Recommendations

Info

Industrial Communication MEN 3U CompactPCI and CompactPCI Express F209L – 3U CompactPCI ® WLAN Interface ■ HP -bit/ -MHz CompactPCI ® ■ IEEE 80 .11b ■ Outdoor range up to 600 m ■ Up to 11 Mbits/s per channel ■ Output power 0 dBm ■ Frequency band . GHz (DSSS) ■ 0-bit or 1 8-bit WEP encryption ■ Reverse SMA antenna connectors ■ - 0 to +8 °C screened WLAN Interface ■ IEEE 802.11b compliant ■ Prism 2.5 chipset ■ 40-bit or 128-bit WEP encryption, MAC filter and Access control ■ Data rate up to 11Mbits/s per channel, auto fall-back ■ Frequency band width 2.4GHz with Direct ■ Sequence Spread Spectrum (DSSS) ■ Outdoor range up to 600m ■ Two antenna connectors at front panel ■ For the use of external antennae ■ Rugged screw connection ■ Output power: 20 dBm (100 mW) typ. ■ Receiver sensitivity: ■ -91 dBm @ 11Mbits/s ■ -92 dBm @ 5.5Mbits/s ■ -93 dBm @ 2Mbits/s ■ -95 dBm @ 1Mbit/s LED Antenna Connector Antenna Connector WLAN Controller PC Card ■ Supported modulations: CCK (11Mbits/s, 5.5Mbits/s), DQPSK (2Mbits/s), DBPSK (1Mbit/s) ■ One activity LED ■ Implemented through on-board PC Card ■ Allows easy configuration of IEEE standard through different PC Cards ■ IEEE 802.11a, IEEE 802.11b, or IEEE 802.11g Front Connections ■ Two Reverse SMA antenna connectors CompactPCI ® Bus ■ Compliance with CompactPCI ® Core Specification PICMG 2.0 R3.0 ■ Peripheral slot ■ 32-bit/33-MHz PCI-to-PCI bridge ■ V(I/O): +3.3V (+5V tolerant) PC Card / CardBus Controller CompactPCI® J1 Electrical Specifications ■ Supply voltage/power consumption: ■ +5V (-3%/+5%), transmit operation: 400mA max., receive operation: 300mA max., sleep mode: 50mA max. ■ +3.3V (-3%/+5%), 50mA max. ■ MTBF (without WLAN PC card): 3,560,811h @ 40°C according to IEC/TR 62380 (RDF2000) Mechanical Specifications ■ Dimensions: conforming to CompactPCI ® specification for 3U boards ■ Front panel: 4HP with ejector ■ Weight: 180g Environmental Specifications ■ Temperature range (operation): ■ -40..+85°C (screened) ■ Airflow: min. 10m³/h ■ Temperature range (storage): -40..+85°C ■ Relative humidity (operation): max. 95% non-condensing ■ Relative humidity (storage): max. 95% non-condensing ■ Altitude: -300m to + 3,000m ■ Shock: 15g/11ms ■ Bump: 10g/16ms ■ Vibration (sinusoidal): 2g/10..150Hz ■ Conformal coating on request Safety ■ PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC ■ Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to CE conformity Software Support ■ Driver software for Windows ® and Linux
F206 – 3U CompactPCI ® Octal UART for SA-Adapters ■ Octal 16 0 UART ■ RS / / 8 /TTY, isolated/not isolated ■ Large receive and transmit FIFOs ■ Very high data rates up to Mbits/s ■ Full handshake support ■ Hardware flow control for RS 8 half duplex ■ Physical layer via SA-Adapters ■ -8 SA-Adapters (1- CompactPCI ® slots) ■ Appl. for other protocols like HDLC ■ - 0 to +8 °C with qualified components UARTs ■ Up to eight UARTs ■ Accessible via on-board connectors ■ Physical interface at front panel using SA-Adapters via 10-pin ribbon cable ■ Diff. variations with SA-Adapters possible: ■ RS232, RS422, RS485, TTY ■ Data rates up to 2 Mbits/s ■ 60-byte transmit/receive buffer ■ Handshake lines: full support; lines depend on SA-Adapters FPGA ■ Standard factory FPGA configuration: ■ Main bus interface ■ 16Z054_SYSTEM - System unit ■ 16Z025_UART - UART controller (controls COM10..COM13) ■ 16Z025_UART - UART controller (controls COM14..COM17) ■ 16Z045_FLASH - Flash interface ■ The FPGA offers the possibility to add customized I/O functionality. See FPGA. Miscellaneous ■ Four status LEDs Local PCI Bus ■ 32-bit/33-MHz, 3.3V V(I/O) ■ Compliant with PCI Specification 2.2 CompactPCII ® Bus ■ Compliance with CompactPCI ® Core Specification PICMG 2.0 R3.0 ■ Peripheral slot ■ V(I/O): +3.3V Electrical Specifications ■ Supply voltage/power consumption: ■ +5V (-3%/+5%), current depends only on mounted SA-Adapters ■ +3.3V (-3%/+5%), > 500mA typ. ■ MTBF: 308,000h @ 40°C (derived from MIL-HDBK-217F) Mechanical Specifications ■ Dimensions: conforming to CompactPCI ® specification for 3U boards ■ Single 3U front panel slot for up to 2 UARTs ■ Up to three supplementary front panel slots required for overall eight UARTs ■ Front panel: aluminum with 1 handle ■ Weight: 95g Environmental Specifications ■ Temperature range (operation): ■ -40..+85°C (qualified components) ■ Airflow: min. 10m³/h ■ Temperature range (storage): -40..+85°C ■ Relative humidity (operation): max. 95% nc ■ Relative humidity (storage): max. 95% nc ■ Altitude: -300m to + 3,000m ■ Shock: 15g/11ms ■ Bump: 10g/16ms ■ Vibration (sinusoidal): 2g/10..150Hz ■ Conformal coating on request Safety ■ PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers Additional Front Panels F B F F F F F F F F Front Panel On Board Connector SA SA SA SA SA SA SA SA B B B B B B B B MEN 3U CompactPCI and CompactPCI Express Configuration Flash Update UART UART Config FPGA Cyclone EP1C12 Configuration PLD Config CompactPCI J1 Industrial Communication
Page 1 and 2: Embedded Solutions 3U CompactPCI®
Page 3 and 4: Contents 4 Intel ® -based 3U Compa
Page 5 and 6: F18 - 3U CompactPCI ® /Express Cor
Page 9 and 10: F600 - 3U CompactPCI ® Side Card f
Page 11 and 12: F603 - 3U CompactPCI ® Side Card U
Page 13 and 14: F11N - 3U CompactPCI ® /PXI Penti
Page 15 and 16: F13 - 3U CompactPCI ® MPC8540 SBC
Page 17 and 18: F206N - 3U CompactPCI ® Nios ® II
Page 19 and 20: F301 - 3U CompactPCI ® 9-Port Ethe
Page 21: F210 - 3U CompactPCI ® GSM/GPS/UAR
Page 25 and 26: F212 - 3U CompactPCI ® PCIe MiniCa
Page 27 and 28: F205/F204 - 3U CompactPCI ® /PXI
Page 29 and 30: Individual Solutions 4U 84HP Compac
Page 31 and 32: Standard CompactPCI ® Desktop - 3
Page 35 and 36: CompactPCI ® Express Rack 0701-004

3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group

Create successful ePaper yourself

Delete template?

Save as template?