3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group
3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group 3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group
Intel-based 10 MEN 3U CompactPCI and CompactPCI Express F601 – 3U CompactPCI ® Side Card for Multimedia ■ /8 HP extension for U Intel ® SBCs F1 , F1 , F17, F18 ■ DVI connections ■ 1 HD audio ■ 1 COM, alternatively with optical isolation ■ . " SATA hard-disk slot I/O ■ DVI ■ One (4HP) or two (8HP) DVI-D connectors at front panel ■ SDVO PanelLink transmitter ■ Maximum resolution: 1600 x 1200 pixels ■ 60Hz refresh rate ■ Dual monitor support ■ Audio ■ One HD (high definition) audio codec at front panel ■ Symmetric stereo output (two 350mW mono amplifiers) ■ Symmetric mono output (integrated 2W Class D mono amplifier) ■ RS232..485 UART (COM1) ■ One D-Sub connector at second front panel ■ Via SA-Adapter ■ Data rates up to 115.2kbits/s ■ Handshake lines: full support; lines depend on SA-Adapter CPU Board IDE (SATA) SDVO HD Audio Link SDVO USB 2.0 USB 2.0 1 PCI- Express Lane F B Mass Storage ■ Serial IDE (SATA) ■ One port for on-board 2.5" hard-disk drive ■ Transfer rates up to 150MB/s (depends on hard disk, 28MB/s for 2.5" hard disk) ■ RAID level 0/1 support (depends on CPU board) Miscellaneous ■ CompactPCI ® J1 and J2 are assembled for increased mechanical stability and/or for power supply via J1 ■ CompactPCI ® J2 can optionally be used to realize several functions via rear I/O. See Options. Electrical Specifications ■ Supply voltage/power consumption: ■ +5V (-3%/+5%), 635mA typ. with hard disk, max. value depends on hard disk ■ +3.3V (-3%/+5%), tbd A typ./max. ■ MTBF: 394,000h @ 40°C (derived from MIL-HDBK-217F) B On-board HDD DVI HD Audio DVI F USB-to- UART/PS/2 Bridge B SA F F F HD Audio Gigabit Ethernet SMBus 8 I/O Lines Front panel connector On board connector Board-to- Board Connector Options SA SA-Adapter R Rear I/O connector RS485 TTL Interface R First Front Panel Second Front Panel J2 Rear I/O Options Mechanical Specifications ■ Dimensions: conforming to CompactPCI ® specification for 3U boards ■ Weight: 330g (with hard disk and 12HP front panel) Environmental Specifications ■ Temperature range (operation): ■ 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits) ■ Industrial temperature range on request ■ Airflow: min. 10m³/h ■ Temperature range (storage): -40..+85°C ■ Relative humidity (operation): max. 95% non-condensing ■ Relative humidity (storage): max. 95% non-condensing ■ Altitude: -300m to + 3,000m ■ Shock: 15g/11ms ■ Bump: 10g/16ms ■ Vibration (sinusoidal): 1g/10..150Hz ■ Conformal coating on request Safety ■ PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC ■ Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to CE conformity Software Support ■ Driver software for the UART interface for Windows ® , Linux (to be verified), VxWorks ® (to be verified), QNX ® (on request)
F603 – 3U CompactPCI ® Side Card USB/COM ■ HP extension for U Intel ® SBCs F1 , F1 , F17, F18 ■ 1 RS ■ USB .0 ■ . " SATA hard-disk slot ■ CompactFlash ® slot I/O ■ USB ■ Two USB 2.0 ports ■ Series A connector at front panel ■ UHCI implementation ■ Data rates up to 480Mbits/s ■ High current up to 1A ■ UART ■ One RS232 at front panel ■ Data rates up to 1 Mbit/s ■ FIFO receive and transmit buffers for high data throughput ■ Handshake lines: full support Mass Storage ■ Serial IDE (SATA) ■ One port for on-board 2.5" hard-disk drive ■ Transfer rates up to 150MB/s (depends on hard disk, 28MB/s for 2.5" hard disk) ■ RAID level 0/1 support (depends on CPU board) ■ CompactFlash ® card interface ■ Via USB to PATA converter ■ Type I CPU Board IDE (SATA) USB 2.0 USB 2.0 USB 2.0 USB 2.0 Board-to- Board Connector ■ True IDE mode ■ Multiword DMA 2 and UDMA 4 support ■ Please note that operating systems which cannot boot from removable data carriers (e.g. Windows ® XP) cannot boot from the CompactFlash ® over USB Miscellaneous ■ CompactPCI ® J1 is assembled for increased mechanical stability and/or for power supply Electrical Specifications ■ Supply voltage/power consumption: ■ +5V (-3%/+5%), 50mA typ. (w/o hard disk) ■ +3.3V (-3%/+5%), 95mA typ. (w/o hard disk) ■ MTBF: tbd. h @ 40°C according to IEC/TR 62380 (RDF 2000) Mechanical Specifications ■ Dimensions: conforming to CompactPCI ® specification for 3U boards ■ Mountable on right (standard) or left (option) side of the CPU ■ Weight: 130g (w/o hard disk and CompactFlash ® ) USB-to-PATA Converter USB-to- UART Bridge B On-board HDD Compact Flash F F F F B Front panel connector On board connector MEN 3U CompactPCI and CompactPCI Express Environmental Specifications ■ Temperature range (operation): ■ 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits) ■ Airflow: min. 10m³/h ■ Temperature range (storage): -40..+85°C ■ Relative humidity (operation): max. 95% non-condensing ■ Relative humidity (storage): max. 95% non-condensing ■ Altitude: -300m to + 3,000m ■ Shock: 15g/11ms ■ Bump: 10g/16ms ■ Vibration (sinusoidal): 2g/10..150Hz ■ Conformal coating on request Safety ■ PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC ■ Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to CE conformity Software Support ■ Driver software for the UART interface and the USB to CompactFlash ® converter for Windows ® , Linux (to be verified), VxWorks ® (to be verified), QNX ® (on request) Intel-based 11
- Page 1 and 2: Embedded Solutions 3U CompactPCI®
- Page 3 and 4: Contents 4 Intel ® -based 3U Compa
- Page 5 and 6: F18 - 3U CompactPCI ® /Express Cor
- Page 7 and 8: F15 - 3U CompactPCI ® /Express Cor
- Page 9: F600 - 3U CompactPCI ® Side Card f
- Page 13 and 14: F11N - 3U CompactPCI ® /PXI Penti
- Page 15 and 16: F13 - 3U CompactPCI ® MPC8540 SBC
- Page 17 and 18: F206N - 3U CompactPCI ® Nios ® II
- Page 19 and 20: F301 - 3U CompactPCI ® 9-Port Ethe
- Page 21 and 22: F210 - 3U CompactPCI ® GSM/GPS/UAR
- Page 23 and 24: F206 - 3U CompactPCI ® Octal UART
- Page 25 and 26: F212 - 3U CompactPCI ® PCIe MiniCa
- Page 27 and 28: F205/F204 - 3U CompactPCI ® /PXI
- Page 29 and 30: Individual Solutions 4U 84HP Compac
- Page 31 and 32: Standard CompactPCI ® Desktop - 3
- Page 33 and 34: F18 - 3U CompactPCI ® /Express Cor
- Page 35 and 36: CompactPCI ® Express Rack 0701-004
Intel-based<br />
10<br />
MEN <strong>3U</strong> CompactPCI and CompactPCI <strong>Express</strong><br />
F601 – <strong>3U</strong> CompactPCI ® Side Card for Multimedia<br />
■ /8 HP extension for U Intel ® <strong>SBC</strong>s F1 , F1 , F17, F18<br />
■ DVI connections<br />
■ 1 HD audio<br />
■ 1 COM, alternatively with optical isolation<br />
■ . " SATA hard-disk slot<br />
I/O<br />
■ DVI<br />
■ One (4HP) or two (8HP) DVI-D connectors at<br />
front panel<br />
■ SDVO PanelLink transmitter<br />
■ Maximum resolution: 1600 x 1200 pixels<br />
■ 60Hz refresh rate<br />
■ Dual monitor support<br />
■ Audio<br />
■ One HD (high definition) audio codec at<br />
front panel<br />
■ Symmetric stereo output<br />
(two 350mW mono amplifiers)<br />
■ Symmetric mono output (integrated 2W<br />
Class D mono amplifier)<br />
■ RS232..485 UART (COM1)<br />
■ One D-Sub connector at second front panel<br />
■ Via SA-Adapter<br />
■ Data rates up to 115.2kbits/s<br />
■ Handshake lines: full support; lines depend<br />
on SA-Adapter<br />
CPU Board<br />
IDE (SATA)<br />
SDVO<br />
HD Audio<br />
Link<br />
SDVO<br />
USB 2.0<br />
USB 2.0<br />
1 PCI-<br />
<strong>Express</strong><br />
Lane<br />
F<br />
B<br />
Mass Storage<br />
■ Serial IDE (SATA)<br />
■ One port for on-board 2.5" hard-disk drive<br />
■ Transfer rates up to 150MB/s (depends on<br />
hard disk, 28MB/s for 2.5" hard disk)<br />
■ RAID level 0/1 support<br />
(depends on CPU board)<br />
Miscellaneous<br />
■ CompactPCI ® J1 and J2 are assembled for<br />
increased mechanical stability and/or for<br />
power supply via J1<br />
■ CompactPCI ® J2 can optionally be used<br />
to realize several functions via rear I/O.<br />
See Options.<br />
Electrical Specifications<br />
■ Supply voltage/power consumption:<br />
■ +5V (-3%/+5%), 635mA typ. with hard disk,<br />
max. value depends on hard disk<br />
■ +3.3V (-3%/+5%), tbd A typ./max.<br />
■ MTBF: 394,000h @ 40°C (derived from<br />
MIL-HDBK-217F)<br />
B On-board<br />
HDD<br />
DVI<br />
HD Audio<br />
DVI F<br />
USB-to-<br />
UART/PS/2<br />
Bridge<br />
B SA<br />
F<br />
F<br />
F<br />
HD Audio<br />
Gigabit<br />
Ethernet<br />
SMBus 8 I/O Lines<br />
Front panel<br />
connector<br />
On board<br />
connector<br />
Board-to-<br />
Board<br />
Connector<br />
Options<br />
SA SA-Adapter<br />
R<br />
Rear I/O<br />
connector<br />
RS485<br />
TTL<br />
Interface<br />
R<br />
First Front<br />
Panel<br />
Second<br />
Front Panel<br />
J2 Rear I/O<br />
Options<br />
Mechanical Specifications<br />
■ Dimensions: conforming to CompactPCI ®<br />
specification for <strong>3U</strong> boards<br />
■ Weight: 330g (with hard disk and 12HP front<br />
panel)<br />
Environmental Specifications<br />
■ Temperature range (operation):<br />
■ 0..+60°C up to -40..+85°C (depending on<br />
hard disk; please refer to the hard disk<br />
specifications for possible limits)<br />
■ Industrial temperature range on request<br />
■ Airflow: min. 10m³/h<br />
■ Temperature range (storage): -40..+85°C<br />
■ Relative humidity (operation):<br />
max. 95% non-condensing<br />
■ Relative humidity (storage):<br />
max. 95% non-condensing<br />
■ Altitude: -300m to + 3,000m<br />
■ Shock: 15g/11ms<br />
■ Bump: 10g/16ms<br />
■ Vibration (sinusoidal): 1g/10..150Hz<br />
■ Conformal coating on request<br />
Safety<br />
■ PCB manufactured with a flammability rating<br />
of 94V-0 by UL recognized manufacturers<br />
EMC<br />
■ Tested according to EN 55022 (radio<br />
disturbance), IEC1000-4-2 (ESD) and<br />
IEC1000-4-4 (burst) with regard to CE<br />
conformity<br />
Software Support<br />
■ Driver software for the UART interface for<br />
Windows ® , Linux (to be verified), VxWorks ®<br />
(to be verified), QNX ® (on request)