3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group

Embedded Solutions 

3U CompactPCI® 

and CompactPCI ® 

Express 

Product Overview 2008 

Rugged Computer Boards 

and Systems for Harsh, 

Mobile and Mission-Critical 

Environments

CompactPCI / CompactPCI Express 

MEN 3U CompactPCI and CompactPCI Express 

CompactPCI ® and CompactPCI ® Express 

MEN Mikro Elektronik offers a wide product range of CompactPCI ® and CompactPCI ® Express single-board 

computers in single Eurocard format based on Intel ® and PowerPC ® architectures for robust industrial and 

embedded applications. 

In addition to traditional industrial PC functions like real-time clock or watchdogs for temperature and voltage 

control, many boards provide the newest technologies such as Gigabit Ethernet, SATA or GSM/GPS. Memory and 

mass storage on offer include standard DRAM, non-volatile SRAM or FRAM, CompactFlash ® , NAND Flash and 

on-board hard disks for program storage. 

Many boards also offer mezzanine slots for flexible and individual I/O extension or are equipped with an FPGA 

for the implementation of additional customer-specific functions. 

By using the new CompactPCI ® Express bus system with serial instead of parallel data transfer MEN opens up 

completely new possibilities. Data is transferred via point-to-point connections with a data transfer rate of up to 

4 Gbytes/s. The complete bidirectionality of CompactPCI ® Express enables simultaneous transmitting and receiving. 

The use of a hybrid backplane allows a smooth migration from CompactPCI ® to CompactPCI ® Express. 

For application in harsh environmental conditions MEN’s CompactPCI ® boards are specially developed, qualified 

and tested – regarding shock, vibration, resonance, humidity and chemicals for an operation temperature 

from -40 up to +85°C. Complete CompactPCI ® /Express systems are wired, tested with Schroff ® mechanics and 

backplanes and delivered in an individual configuration. 

Designed for: -40 to +85°C operation temperature, 

shock, drop, bump, vibration, humidity, chemical resistance 

A CompactPCI ® /Express hybrid rack enables 

a smooth migration from cPCI to cPCI Express

Contents 

4 Intel ® -based 3U CompactPCI ® Boards 

5 F18 – 3U CompactPCI ® /Express 

Core 2 Duo SBC 




Core Duo SBC 


Pentium ® M SBC 

9 F600 – 3U CompactPCI ® Side Card 

for SATA/Legacy I/O 


for Multimedia 


USB/COM 


FireWire 

13 F11N – 3U CompactPCI ® /PXI 

Pentium ® III SBC 

14 PowerPC ® and Nios ® -based 3U 

CompactPCI ® Boards 

15 F13 – 3U CompactPCI ® MPC8540 SBC 

16 F12N – 3U CompactPCI ® MPC5200B SBC 

17 F206N – 3U CompactPCI ® Nios ® II 

Slave Board 

Intel ® -based 3U CompactPCI ® product family 

18 3U CompactPCI ® Boards 

for Industrial Communication 

19 F301 – 3U CompactPCI ® 9-Port 

Ethernet Switch 

20 F211 – 3U CompactPCI ® Quad Fast 

Ethernet Interface 

21 F210 – 3U CompactPCI ® 

GSM/GPS/UART Interface 

22 F209L – 3U CompactPCI ® WLAN Interface 

23 F206 – 3U CompactPCI ® Octal UART 

for SA-Adapters 

24 3U CompactPCI ® Carrier Boards 

for Extension Cards 

25 F212 – 3U CompactPCI ® PCIe 

MiniCard Carrier 

F213 – 3U CompactPCI ® PMC Carrier 

26 F209 – 3U CompactPCI ® PC Card Carrier 

F207 – 3U CompactPCI ® PCI-104 Carrier 

F206I – 3U CompactPCI ® -ISA PC/104 

Carrier 

27 F205/F204 – 3U CompactPCI ® /PXI 

M-Module Carrier 

F203 – 3U CompactPCI ® /PXI 

PC-MIP ® Carrier 


28 Housings and Turnkey Systems 

29 Individual Solutions 

30 CompactPCI ® Rack 0701-0021 – 

8 Slots Single Eurocard 

31 CompactPCI ® Desktop 0701-0046 – 

3 Slots Single Eurocard 

32 3U CompactPCI ® Express Boards 



F17 – 3U CompactPCI ® /Express 



Core Duo SBC 


Pentium ® M SBC 

34 F602 – 3U CompactPCI ® Express 

Side Card 

F700 – 3U CompactPCI ® Express 

XMC/PMC Carrier 

35 CompactPCI ® Express Rack 0701-0041 – 

8 Slots Hybrid 

36 Ordering and Shipping Information 

CompactPCI / CompactPCI Express

Intel-based MEN 

3U CompactPCI and CompactPCI Express 

Intel ® -based 3U CompactPCI ® Boards 

A highlight of the MEN product range is the Intel ® -based 3U CompactPCI ® product family. The performance of these 

boards ranges from the latest Core TM 2 Duo (2.2 GHz) down to the ultra low power Celeron ® M 373 (1.0 GHz). 

Thanks to this family concept, expensive and time-consuming system adaptations are not needed anymore. 

The intercompatible Intel ® -based boards enable a smooth migration to the next higher processor generation. 

Existing system and software solutions can be continued to be used. If the performance of a running system has to 

be increased the existing single-board computer can be replaced by a new member of the MEN product family with 

a higher performance. A special feature of these Intel ® -based boards is the extendibility of the I/O functions using 

different side cards. Depending on requirements the performance range can be extended by additional legacy I/O 

interfaces, multimedia functions, additional USB interfaces or FireWire for fast data transfer. Long-term availability 

of at least five years from product start and RoHS conformity guarantee that the user’s project is future-safe which 

is a requirement in many embedded applications. 

Another product highlight based on Intel ® is the F11N. It is a perfect computing platform for infotainment, control 

or monitoring applications and combines the advantages of the FPGA technology and the low power versions of 

the Intel ® Celeron ® / Pentium ® III. Thanks to the Altera ® Cyclone TM FPGA customer-specific functions can be realized 

flexibly and individually on the board. Depending on requirements, the needed IP cores can be compiled from 

the MEN function library and be newly configured, combined with IP cores from other manufacturers or newly 

developed. Thanks to a long-term availability until at least 2011 and RoHS conformity the F11N ensures that the 

user’s project is future-safe. 

F18 

p. 5 

F17 

p. 6 

F15 

p. 7 

F14 

p. 8 

F600 

p. 9 

F601 

p. 10 

F603 

p. 11 

F604 

p. 12 

F11N 

p. 13 

Type 

SBC 



SBC Up to Pentium M 

760, 2GHz or 

Celeron M 373, 

1GHz 

Side Card 

Legacy I/O 

F14..F18 

Side Card 

Multimedia 

F14..F18 

Side Card 

USB/COM 

F14..F18 

Side Card 

FireWire 

F14..F18 


CPU 

Intel Core 2 Duo 

up to T7500, 

2.2GHz 

(64-bit CPU) 

Intel Core 2 Duo 

up to T7400, 

2.16GHz 

(64-bit CPU) 

Intel Core Duo up 

to T2500, 2GHz 

ULV/ULP Pentium 

III / 933MHz 

Celeron 650MHz 

CompactPCI ® 


32-bit/33MHz, PCI 

system slot, 1 cPCI 

slot or 1 cPCI Express 

slot or stand-alone 













4HP, connected to 

CompactPCI for 

power supply 

4HP or 8HP, connected 

to CompactPCI 

for power supply 



power supply 



power supply 

32-bit/33MHz 

PCI system slot, 

3 CompactPCI slots 

or stand-alone 

Memory 

max. 

4GB DDR2 

DRAM (soldered), 

CompactFlash or 

1.8” hard disk 

2GB DDR2 




2GB DDR2 




2GB DDR2 




512MB DRAM, 

2MB SRAM, 

CompactFlash 



Interfaces 

PCIe 6 x1, 2 SATA, 2 Gigabit 

Ethernet, 8 USB 2.0, 1 VGA, 

1/2 DVI, audio (via front, 

extension cards or rear I/O) 













1..4 UARTs; via SA-Adapters 

(RS232/422/485, isolated/ 

not isolated) 

1..2 DVI, 1 audio, 

0..1 COM via SA-Adapter 

(RS232/422/485, isolated/ 

not isolated) 

2 USB 2.0, 1 COM 

1 IEEE 1394, 1 DVI-D, 1 HD 

audio, 1 COM 

2 Fast Ethernet, COM 1, 

USB 1.1, 2 CAN 

■ Up-to-date and more detailed data sheets (including description of configuration 

possibilities and options, ordering information, available accessories and software) 

under www.men.de/cpci 

Local 

Extensions 

I/O extension cards: 

F600..F604 

see below 


F600..F604 

see below 


F600..F604 

see below 


F600..F604 

see below 

2.5” SATA drive 




FPGA for custom I/O, 

7 SA-Adapters, 

local hard disk 

Software 

Windows, 

Linux 

Windows, 

Linux 

Windows, 

Linux 

Windows, 

Linux, 

VxWorks, QNX 

Windows, 

Linux, 

VxWorks, QNX 

Windows, 

Linux, 

VxWorks, QNX 

Windows, 

Linux, 

VxWorks, QNX 

Windows, 

Linux, 

VxWorks, QNX 

Windows, 

Linux, VxWorks 

Applications 

Industrial autom., 

robotics, 

instrumentation, 

multimedia 


robotics, 


multimedia 


robotics, 


multimedia 


robotics, 


multimedia 


robotics, 

instrumentation 


robotics, 



robotics, 



robotics, 


Transportation, 

mobile 

computing, 

industrial autom.

F18 – 3U CompactPCI ® /Express Core 2 Duo SBC 

■ Intel ® Core Duo T7 00, . GHz 

■ Dual core 6 -bit processor 

■ Full 6 -bit support ( GB memory addressable) 

■ PCI Express ® six x1 links 

■ HP system master or stand-alone 

■ -bit CompactPCI ® or cPCI Express ® 

■ Up to GB DDR DRAM soldered 

■ CompactFlash ® slot 

■ SATA interfaces 

■ Video via VGA and SDVO 

■ Gigabit Ethernet (PCIe) 

■ Up to 8 USB .0 

■ High Definition audio 

■ Board controller 

CPU 

■ Intel ® Core 2 Duo T7500 

■ Dual-core 64-bit processor 

■ 2.2GHz processor core frequency 

■ Up to 667MHz front-side bus frequency 

■ Chipset 

■ Northbridge: Intel ® 965GM Express 

■ Southbridge: Intel ® ICH8-M DH 

Memory 

■ 4MB L2 cache integrated in Core 2 Duo 

■ Up to 4GB SDRAM system memory 

■ Soldered 

■ DDR2 

■ 667MHz memory bus frequency 

■ Dual-channel, 2x64 bits 

■ 8Mbits boot Flash 

■ Serial EEPROM 2kbits for factory settings 

■ CompactFlash ® card interface 

Intel® 

Core 2 Duo 

965GM Express 

Memory Controller 

Graphics Controller 

ICH8-M DH 

I/O Controller Hub 

PCIe x1 

PCIe x1 

System Memory 

DDR2 SDRAM 

System Memory 

DDR2 SDRAM 

VGA 

Dual SDVO 

Watchdog 

IDE (PATA) 

IDE (SATA) 

USB 2.0 F 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

HD Audio 

Ethernet 

10/100/1000Base-T 

Ethernet 

10/100/1000Base-T 

■ Via on-board IDE 

■ Type I 

■ True IDE 

■ DMA support 

Mass Storage 

■ Parallel IDE (PATA) 

■ One IDE port for local CompactFlash ® , or: 

■ One CD-ROM port via on-board connector 

■ Serial IDE (SATA) 

■ Two channels via side-board connector 

■ Transfer rates up to 150MB/s 

■ RAID level 0/1 support 

Graphics 

■ Integrated in 965GM Express chipset 

■ Up to 500MHz 256-bit graphics core 

■ Up to 10.6 GB/s memory bandwidth 

■ Maximum resolution: 2048 x 1536 pixels 

16M colors @ 75Hz refresh rate 

PCI 

F 

F 

PCIe 4 x1 or 1 x4 

F 

F 

Front panel 

F 

connector 

Rear I/O 

R 

connector 

CompactFlash® 

cPCI J1/J2 

or: Busless +5V 

Options 

B 

Side-Card 

Connector 

J2 Rear I/O 

Options 

R 


■ Dynamic Display Modes for flat-panel, 

wide-screen and Digital TV support 

■ VGA connector at front panel 

■ Two SDVO ports available via side-card conn. 

■ Two additional DVI connectors at front panel 

optional via side card 

■ Simultaneous connection of two monitors 

I/O 

■ USB 

■ Two USB 2.0 ports via Series A connectors 

at front panel 

■ Four USB 2.0 ports via side-board connector 

■ Two USB 2.0 ports via rear I/O on request 

■ UHCI implementation 

■ Data rates up to 480Mbits/s 

■ Ethernet 

■ Two 10/100/1000Base-T Ethernet channels 

■ RJ45 connectors at front panel 

■ Ethernet controllers are connected by 

two x1 PCIe links 

■ On-board LEDs to signal activity status and 

connection speed 

■ High Definition (HD) audio 

■ Accessible via side-board connector 

Front Connections 

■ VGA 

■ Two USB 2.0 (Series A) 

■ Two Ethernet (RJ45) 

Miscellaneous 


■ Real-time clock, buffered by a GoldCap or 

alternatively a battery (5 years life cycle) 

■ Watchdog timer 

■ Temperature measurement 

■ One user LED 

■ Reset button 

PCI Express ® 

■ Two x1 links to connect local 1000Base-T 

Ethernet controllers (250MB/s in each dir.) 

■ One x4 link or four x1 links for extension 

through side-board connector 

CompactPCI ® Bus 

■ Compliance with CompactPCI ® Core 

Specification PICMG 2.0 R3.0 

■ CompactPCI ® Express support (EXP.0 R1.0) 

■ System slot 

■ 32-bit/33-MHz CompactPCI ® bus 

■ V(I/O): +3.3V (+5V tolerant) 

Busless Operation 

■ Board can be supplied with +5V only, all 

other voltages are generated on the board 

■ Backplane conn. used only for power supply 

Intel-based

Intel-based 

6 



■ Intel ® Core Duo T7 00 or L7 00 













CPU 

■ Intel ® Core 2 Duo T7400 or L7400 (LV) 

■ Dual-core 64-bit processor 

■ 2.16GHz or 1.5GHz processor core frequency 


■ Chipset 



Memory 

■ 4MB L2 cache integrated in Core 2 Duo 


■ Soldered 

■ DDR2 







■ Type I 

■ True IDE 


Mass Storage 


■ One IDE port for local CompactFlash ® , or: 






Graphics 


■ 200/250MHz 256-bit graphics core 











I/O 

■ USB 

■ Two USB 2.0 ports via Series A connectors at 

front panel 





■ Ethernet 










■ VGA 



Miscellaneous 



alternatively a battery 





Intel® 

Core 2 Duo 




ICH7-M DH 


PCIe x1 

PCIe x1 

System Memory 

DDR2 SDRAM 

System Memory 

DDR2 SDRAM 

VGA 

Dual SDVO 

Watchdog 

IDE (PATA) 

IDE (SATA) 

USB 2.0 F 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

HD Audio 

Ethernet 

10/100/1000Base-T 

Ethernet 

10/100/1000Base-T 



Ethernet controllers (250MB/s in each 

direction) 













■ Backplane connectors used only for 

power supply 

PCI 

F 

F 


F 

F 

Front panel 

F 

connector 

Rear I/O 

R 

connector 


cPCI J1/J2 


Options 

B 

Side-Card 

Connector 

J2 Rear I/O 

Options 

R

F15 – 3U CompactPCI ® /Express Core Duo SBC 

■ Intel ® Core Duo T 00, GHz 












CPU 

■ Dual-core Intel ® Core Duo T2500, L2400 

(LV), U2500 (ULV) or single-core Celeron ® 

M 440, M 423 (ULV) 

■ Up to 2.0GHz processor core frequency 


■ Chipset 



Memory 

■ 2MB L2 cache integrated in Core Duo 

(1MB with Celeron ® M) 


■ Soldered 

■ DDR2 





Intel® 

Core Duo 

or 

Celeron® M 




ICH7-M DH 


PCIe x1 

PCIe x1 

System Memory 

DDR2 SDRAM 

System Memory 

DDR2 SDRAM 

VGA 

Dual SDVO 

Watchdog 

IDE (PATA) 

IDE (SATA) 

USB 2.0 F 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

HD Audio 

Ethernet 

10/100/1000Base-T 

Ethernet 

10/100/1000Base-T 

PCI 



■ Type I 

■ True IDE 


Mass Storage 


■ One IDE port for local CompactFlash ® 






Graphics 


■ 200/250MHz 256-bit graphics core 




F 

F 


F 

F 

Front panel 

F 

connector 

Rear I/O 

R 

connector 


cPCI J1/J2 


Options 

B 

Side-Card 

Connector 

J2 Rear I/O 

Options 

R 









I/O 

■ USB 


front panel 





■ Ethernet 










■ VGA 



Miscellaneous 










Ethernet controllers (250MB/s in each 

direction) 













■ Backplane connectors used only for power 

supply 

Intel-based 

7

8 


■ ULV Celeron ® M 7 , 1 GHz 

■ Up to Pentium ® M 760, GHz 

■ PCI Express ® four x1 links 











CPU 

■ ULV Celeron ® M 373 up to Pentium ® M 760 

■ 1.0 to 2.0GHz processor core frequency 

■ 400MHz or 533MHz front-side bus frequency 

■ Chipset 

■ Northbridge: Intel ® 915GM 

■ Southbridge: Intel ® ICH6M 

Memory 

■ Up to 1MB L2 cache integrated in Celeron ® M 

or 2MB L2 cache integrated in Pentium ® M 


■ Soldered; DDR2 

■ 400MHz or 533MHz memory bus frequency 






■ Type I; True IDE; DMA support 

Mass Storage 


■ One IDE port for local CompactFlash ® 


■ Two channels via side-card connector, or: 

one channel via side card and one channel 

via rear I/O 


Graphics 

■ Integrated in 915GM chipset 

■ Analog CRT DAC interface support 

■ Supports max. DAC frequency up to 

400 MHz 

■ 24-bit RAMDAC support 

■ Maximum resolutions: 2048 x 1536 pixels 

16M colors @ 75Hz refresh rate (analog); 

1600 x 1200 pixels 16M colors @ 60Hz (dig.) 

■ Incorporates PanelLink Digital technology 

(Silicon Image) 






I/O 

■ USB 


front panel 

■ Four USB 2.0 ports via side-card connector 


■ UHCI and EHCI implementation 


■ Ethernet 

■ Two 10/100/1000Base-T Ethernet 

channels, or: one 10/100/1000Base-T and 

one 10/100Base-T channel 


■ Gigabit Ethernet conn. by two x1 PCIe links 




■ Accessible via side-card connector 


■ VGA 



Miscellaneous 









Intel-based F14 – 3U CompactPCI®/Express Pentium® M SBC 

Pentium® M 760 

or 

Celeron® M 373 

Northbridge 

915GM 



Southbridge 

ICH6M 


PCIe x1 

PCIe x1 

System Memory 

DDR2 SDRAM 

System Memory 

DDR2 SDRAM 

VGA 

Dual SDVO 

Watchdog 

IDE (PATA) 

IDE (SATA) 


Ethernet controllers 

■ Two x1 links for extension through side-card 

connector, or: 

■ Three x1 links if one Gigabit Ethernet 

channel is replaced by Fast Ethernet 

■ Up to 250MB/s per channel in each direction 





System slot 






■ Backplane conn. used only for power supply 

PCI 

B 

F 

USB 2.0 F 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

HD Audio 

Ethernet 

10/100/1000Base-T 

Ethernet 

10/100/1000Base-T 

F 

PCIe x1 

PCIe x1 

PCIe x1 

F 

F 

Front panel 

F 

connector 

Rear I/O 

R 

connector 


cPCI J1/J2 


Options 

B 

Side-Card 

Connector 

J2 Rear I/O 

Options 

R

F600 – 3U CompactPCI ® Side Card for SATA/Legacy I/O 

■ HP extension for U Intel ® SBCs 

F1 , F1 , F17, F18 

■ 1- COMs via SA-Adapters 

■ Optical isolation depending on SA-Adapter 

■ . " SATA hard-disk slot 

■ Additional SATA port for external device 

I/O 

■ Up to four UARTs 

■ From four CPU-controlled USB channels 

■ Two at front panel 

■ Two on board, instead of on-board SATA 

device, on request 

■ Physical interface using SA-Adapters via 

10-pin connectors 

■ RS232..RS485, isolated or not: for free use in 

system (e. g. cable to front) 

■ Data rates up to 1 Mbit/s 

■ FIFO receive and transmit buffers for high 

data throughput 

■ Handshake lines: full support; lines depend 

on SA-Adapters 

Mass Storage 


■ One port for on-board 2.5" hard-disk drive 

■ One port for external device 

CPU Board 

IDE (SATA) 

IDE (SATA) 

F 

B 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

Front panel 

connector 

On board 

connector 

Board-to- 

Board 

Connector 

Options 

SA SA-Adapter 

(e.g. SATA DVD Drive) 

■ Transfer rates up to 150MB/s (depends on 

hard disk, 28MB/s for 2.5" hard disk) 

■ RAID level 0/1 support (depends on CPU 

board) 

Miscellaneous 

■ CompactPCI ® J1 and J2 are assembled for 

increased mechanical stability and/or for 

power supply via J1 

Electrical Specifications 

■ Supply voltage/power consumption: 

■ +5V (-3%/+5%), 21mA typ. (with two SA1 

SA-Adapters, w/o hard disk) 

■ +3.3V (-3%/+5%), 50mA typ. (with two SA1 

SA-Adapters, w/o hard disk) 

■ MTBF: 1,663,000h @ 40°C (derived from 

MIL-HDBK-217F) 

B On-board 

HDD 

B 

External 

Device 

USB-to- 

UART bridge 

USB-to- 

UART bridge 

USB-to- 

UART bridge 

USB-to- 

UART bridge 

B SA 

B SA 

B SA 

B SA 

F 

F 

F 

F 

2nd 

front 

panel 


Mechanical Specifications 

■ Dimensions: conforming to CompactPCI ® 

specification for 3U boards 

■ Weight: 145g (w/o hard disk) 

Environmental Specifications 

■ Temperature range (operation): 

■ -40..+85°C (depending on hard disk; please 

refer to the hard disk specifications for 

possible limits) 

■ Airflow: min. 10m³/h 

■ Temperature range (storage): -40..+85°C 

■ Relative humidity (operation): 

max. 95% non-condensing 

■ Relative humidity (storage): 


■ Altitude: -300m to + 3,000m 

■ Shock: 15g/11ms 

■ Bump: 10g/16ms 

■ Vibration (sinusoidal): 2g/10..150Hz 

■ Conformal coating on request 

Safety 

■ PCB manufactured with a flammability rating 

of 94V-0 by UL recognized manufacturers 

EMC 

■ Tested according to EN 55022 (radio 

disturbance), IEC1000-4-2 (ESD) and 

IEC1000-4-4 (burst) with regard to CE 

conformity 

Software Support 

■ Driver software for the UART interface for 

Windows ® , Linux (to be verified), VxWorks ® 

(to be verified), QNX ® (on request) 

Intel-based

Intel-based 

10 


F601 – 3U CompactPCI ® Side Card for Multimedia 

■ /8 HP extension for U Intel ® SBCs F1 , F1 , F17, F18 

■ DVI connections 

■ 1 HD audio 

■ 1 COM, alternatively with optical isolation 


I/O 

■ DVI 

■ One (4HP) or two (8HP) DVI-D connectors at 

front panel 

■ SDVO PanelLink transmitter 


■ 60Hz refresh rate 

■ Dual monitor support 

■ Audio 

■ One HD (high definition) audio codec at 

front panel 

■ Symmetric stereo output 

(two 350mW mono amplifiers) 

■ Symmetric mono output (integrated 2W 

Class D mono amplifier) 

■ RS232..485 UART (COM1) 

■ One D-Sub connector at second front panel 

■ Via SA-Adapter 

■ Data rates up to 115.2kbits/s 


on SA-Adapter 

CPU Board 

IDE (SATA) 

SDVO 

HD Audio 

Link 

SDVO 

USB 2.0 

USB 2.0 

1 PCI- 


Lane 

F 

B 

Mass Storage 






(depends on CPU board) 

Miscellaneous 

■ CompactPCI ® J1 and J2 are assembled for 

increased mechanical stability and/or for 

power supply via J1 

■ CompactPCI ® J2 can optionally be used 

to realize several functions via rear I/O. 

See Options. 



■ +5V (-3%/+5%), 635mA typ. with hard disk, 

max. value depends on hard disk 

■ +3.3V (-3%/+5%), tbd A typ./max. 

■ MTBF: 394,000h @ 40°C (derived from 


B On-board 

HDD 

DVI 

HD Audio 

DVI F 

USB-to- 

UART/PS/2 

Bridge 

B SA 

F 

F 

F 

HD Audio 

Gigabit 

Ethernet 

SMBus 8 I/O Lines 

Front panel 

connector 

On board 

connector 

Board-to- 

Board 

Connector 

Options 

SA SA-Adapter 

R 

Rear I/O 

connector 

RS485 

TTL 

Interface 

R 

First Front 

Panel 

Second 

Front Panel 

J2 Rear I/O 

Options 




■ Weight: 330g (with hard disk and 12HP front 

panel) 



■ 0..+60°C up to -40..+85°C (depending on 

hard disk; please refer to the hard disk 

specifications for possible limits) 

■ Industrial temperature range on request 












Safety 



EMC 




conformity 


■ Driver software for the UART interface for 


(to be verified), QNX ® (on request)

F603 – 3U CompactPCI ® Side Card USB/COM 


F1 , F1 , F17, F18 

■ 1 RS 

■ USB .0 



I/O 

■ USB 

■ Two USB 2.0 ports 

■ Series A connector at front panel 



■ High current up to 1A 

■ UART 

■ One RS232 at front panel 




■ Handshake lines: full support 

Mass Storage 






(depends on CPU board) 


■ Via USB to PATA converter 

■ Type I 

CPU Board 

IDE (SATA) 

USB 2.0 

USB 2.0 

USB 2.0 

USB 2.0 

Board-to- 

Board 

Connector 

■ True IDE mode 

■ Multiword DMA 2 and UDMA 4 support 

■ Please note that operating systems which 

cannot boot from removable data carriers 

(e.g. Windows ® XP) cannot boot from the 

CompactFlash ® over USB 

Miscellaneous 

■ CompactPCI ® J1 is assembled for increased 

mechanical stability and/or for power supply 



■ +5V (-3%/+5%), 50mA typ. (w/o hard disk) 

■ +3.3V (-3%/+5%), 95mA typ. 

(w/o hard disk) 

■ MTBF: tbd. h @ 40°C according to IEC/TR 

62380 (RDF 2000) 




■ Mountable on right (standard) or left 

(option) side of the CPU 

■ Weight: 130g (w/o hard disk and 

CompactFlash ® ) 

USB-to-PATA 

Converter 

USB-to- 

UART Bridge 

B On-board 

HDD 

Compact 

Flash 

F 

F 

F 

F 

B 

Front panel 

connector 

On board 

connector 


















Safety 



EMC 




conformity 


■ Driver software for the UART interface and 

the USB to CompactFlash ® converter for 


(to be verified), QNX ® (on request) 

Intel-based 

11

Intel-based 

1 


F604 – 3U CompactPCI ® Side Card FireWire 


F1 , F1 , F17, F18 

■ 1 IEEE 1 interface 

■ 1 DVI-D Single Link 

■ 1 HD Audio (in or out) 

■ 1 or RS 


I/O 

■ FireWire 

■ One FireWire connector at front panel 

■ According to IEEE 1394 

■ Full 400 Mbit/s via PCI Express ® 

■ Remote feeding 12V/1.5A (power class 1) 

■ For connection of FireWire devices 

(F604 has no GUID) 

■ DVI 

■ One DVI-D connector at front panel 

■ Single link 




■ Audio 

■ One HD (high definition) audio codec at 

front panel 

■ Symmetric stereo output 

(two 185mW mono amplifiers) 

■ Switchable to stereo input 

■ UART 

■ One RS232 via adapter cable 

(see Accessories) 

■ Two RS232 via customized adapter cable 

(optional) 

■ One RJ45 connector at front panel 

■ Data rates up to 1Mbit/s 



■ Handshake lines: CTS, RTS for first COM 

CPU Board 

IDE (SATA) 

1 PCI- 


Lane 

SDVO 

HD Audio 

USB 2.0 

Board-to- 

Board 

Connector 

Mass Storage 





■ RAID level 0/1 support (depends on CPU 

board) 

Miscellaneous 

■ CompactPCI ® J1 is assembled for increased 

mechanical stability and/or for power supply 



■ +5V (-3%/+5%), 440mA typ. (w/o hard disk) 

■ +3.3V (-3%/+5%), 390mA typ. (w/o hard 

disk) 

■ MTBF: 947,377h @ 40°C according to IEC/ 

TR 62380 (RDF 2000) 




■ Mountable on right (standard) or left 

(option) side of the CPU 

■ Weight: 146g (w/o hard disk) 








B On-board 

HDD 

Fire Wire 

USB-to- 

UART- 

Bridge 

F 

DVI F 

Audio 

F 

F 

F 

B 

Front panel 

connector 

On board 

connector 










Safety 



EMC 




conformity 


■ Driver software for the UART interface and 

the FireWire interface for Windows ® , Linux 

(to be verified), VxWorks ® (to be verified), 

QNX ® (on request)

F11N – 3U CompactPCI ® /PXI Pentium ® III SBC 

■ -bit 1 HP CompactPCI ® /PXI 

■ System slot or stand-alone 

■ ULP Pentium ® III up to MHz 

■ ULV Celeron ® up to 6 0 MHz 

■ Up to 1 MB DRAM, 1 8 MB NAND Flash 

■ MB SRAM, CompactFlash ® 

■ Fast Ethernet, COM1, USB 1.1 (front) 

■ Option: COM (front) 

■ VGA, keyboard/mouse (front) 

■ Up to 1600 x 1 00 pixels 

■ Prepared for . " hard disk on board 

■ FPGA – further programmable I/O functions 

CPU 

■ Celeron ® or Pentium ® III 

■ 400MHz/650MHz or 933MHz processor core 

frequency 

■ 100MHz or 133MHz system bus frequency 

■ 33MHz APIC bus frequency 

Memory 

■ 256KB or 512KB L2 cache integrated in CPU 

■ Up to 512MB SDRAM system memory 

■ One 144-pin SO-DIMM socket for SDRAM 

modules 

■ 133/100MHz memory bus frequency 

■ 2MB SRAM 

■ CompactFlash ® interface 

■ Type I 

■ True IDE 

■ Up to 1GB soldered NAND Flash (and more), 

FPGA-controlled 

■ Up to 16MB additional SDRAM, 

FPGA-controlled, e.g. for video data and 

NAND Flash firmware 

■ 2MB boot Flash 

Mass Storage 


■ One port for local CompactFlash ® 

■ One port for local hard-disk drive 

■ Drive can be mounted dir. on the CPU board 

■ Up to 1GB soldered ATA NAND Flash 

(and more), FPGA-controlled 

Graphics 

■ Integrated VGA graphics controller 


■ Up to 1600 x 1200 pixels 

I/O 

■ USB 

■ Two USB 1.1 ports 

■ Two Series A connectors at front panel 



■ Supplies High-Power (500mA) without 

external power supply 

■ Ethernet 

■ Two 10/100Base-T Ethernet interfaces 

■ Two RJ45 connectors at front panel 

■ Four on-board LEDs to signal LAN Link and 

Activity status 

■ Two RS232 UARTs (COM1/COM2) 

■ COM1: 9-pin D-Sub connector at front panel 

■ COM2: Physical interface at front panel using 

SA-Adapter via 10-pin ribbon cable on I/O 

connector 


■ 60-byte transmit/receive buffers 

■ Handshake lines: CTS, RTS; DCD, DSR, DTR 

■ PS/2 keyboard/mouse 


■ VGA 

■ Two USB 1.1 (Series A); Two Ethernet (RJ45) 

■ Two RS232 UARTs COM1/COM2 (D-Sub) 

■ PS/2 keyboard/mouse 

Rear I/O 

■ IDE; other functions on request 

■ Mainly compatible with F9 board 

FPGA 

■ Standard factory FPGA configuration: 

■ Main bus interface 

■ 16Z125_UART - UART contr. (COM1..COM2) 

■ 16Z058_SRAM - SRAM over SPI 

■ 16Z043_SDRAM - Additional SDRAM contr. 

■ 16Z070_IDEDISK - IDE contr. for NAND Flash 

■ The FPGA offers the possibility to add 

customized I/O functionality. See FPGA. 

Pentium® III 

or 

Celeron® 

Intel® 82815E 



ICH 


SDRAM 

PCI Bus 

System 

Memory 

SDR SO-DIMM 

VGA 

Secondary 

IDE 

FPGA 

(optional 

functions) 

PCI-104 P1 

F Front panel 

B On-board 

Options 

PCI-to-PCI Bridge 


B 

PCI-104 P2 

I/O Bus 

CompactPCI® J1/J2 

Miscellaneous 

■ Real-time clock, backed up by the carrier board 

■ Integrated hardware monitor 


■ 4 FPGA-controlled LEDs 





■ Double-slot solution (plus 1 mechanical slot 

for hard disk) 

■ 32-bit/33-MHz PCI-to-PCI bridge 

■ V(I/O): +3.3V or +5V (Universal Board) 

PXI 

■ Prepared for four trigger lines compliant with 

PXI Specification R1.0 

■ Available on request 

Option: 

Busless 

SRAM 

Keyboard/Mouse 

VGA 

USB 1.1 

Primary IDE 

I/O 1 

FPGA Functions 

I/O 2 

FPGA Functions 

COM1 

Ethernet 

10/100Base-T 

Ethernet 

10/100Base-T 

J2 Rear I/O 

Options 

F 

F 

F 

F 

B Hard Disk or 


B 

B 

F 

F 

F 

SA 

SA 

SA 

SA 

SA 

SA 

SA 

Up to 7 optional SA-Adapters 

NAND Flash 

F 

F 

F 

F 

F 

F 

F 

Intel-based 

1

PowerPC and Nios-based 

1 


PowerPC ® and Nios ® -based 3U CompactPCI ® Boards 

MEN offers a broad range of processor architectures – specially configured for the desired area of application. Due 

to their low power dissipation PowerPC ® processors have advantages especially in harsh and mobile environments, 

while Altera ® 's Nios ® II offers incomparable flexibility for its final application. 

Equipped with a Cyclone TM FPGA and an integrated Altera ® Nios ® II microcontroller softcore, MEN's F206N is certainly 

one of the most flexible CompactPCI ® cards on the embedded market. The final functionality of the F206N 

entirely depends on its field of application. This starts with a pure UART solution and goes up to a complex analog 

front end with DSP-like data preprocessing. 

F13 

p. 15 

F12N 

p. 16 

F206N 

p. 17 

Type 



Slave 


CPU 

PowerPC 

MPC8540/ 

800MHz 

PowerPC 

MPC5200B/ 

400MHz 

Nios Soft 

Core 

CompactPCI ® 


32-bit/33MHz 


1 CompactPCI slot 

32-bit/33MHz 



32-bit/33..66-MHz 

1 CompactPCI 

peripheral slot 

F206N – One of the most flexible cPCI cards 

on the embedded market 

Memory 

max. 

2GB DDR DRAM (SO- 

DIMM), NAND Flash 

256MB onboard 

DDR SDRAM, 2MB 

NVRAM, NAND Flash, 

2MB SRAM, 16MB 

graphics RAM 

32MB SDRAM, 

2MB Flash 

Interfaces 






2 Gigabit Ethernet, 

1 Fast Ethernet, 

1 COM 


1 Fast Ethernet, 

1 COM 

1 debug interface 

On-board FPGA 

Altera Cyclone for 

user-defined I/O 

functions 



functions 



functions 

Local Software 

Extensions 

Linux, 

VxWorks, QNX 

FPGA for 

custom I/O 

Linux, 

VxWorks, QNX 

Nios sample 

designs,development 

package, 

update tools 

Applications 

Telecom, 

mobile computing, 

industrial automation, 

robotics, medical 



industrial automation, 

robotics, medical 



industrial automation

F13 – 3U CompactPCI ® MPC8540 SBC 

■ -bit/ -MHz cPCI system slot, HP 

■ MPC8 0, 800MHz (PowerQUICC III) 

■ FPGA 1 ,000 LEs (approx. 1 ,000 gates) 

■ Up to GB DDR DRAM (SO-DIMM) 

■ NAND Flash 

■ Gigabit/1 Fast Ethernet (RJ on front) 

■ 1 COM (RJ on front) 

■ FPGA for user-defined I/O functions 

■ MENMON BIOS for PowerPC ® cards 

CPU 

■ PowerPC ® 

■ MPC8540 PowerQUICC III 

■ 800MHz (666..833MHz optional) 

■ e500 PowerPC ® core with SPE APU and MMU 

■ Integrated Northbridge and Southbridge 

■ High memory bandwidth 

Memory 

■ 2x32KB L1 data and instruction cache, 

256KB L2 cache/SRAM integrated in 

MPC8540 


■ One SO-DIMM slot for SDRAM modules 

■ DDR2100 with or without ECC 


■ Up to 1GB soldered NAND Flash 


■ Up to 16MB additional SDRAM, FPGA-contr., 

e.g. for video data and NAND Flash firmware 


■ 32KB non-volatile FRAM 

■ Up to 16MB additional SDRAM, 

FPGA-controlled, e.g. for video data 


Mass Storage 


■ One IDE port via 44-pin on-board connector 

■ FPGA-controlled 

■ PIO mode 0 support 



I/O 

■ Three Ethernet channels 


■ One 10/100Base-T Ethernet channel 

■ Three RJ45 connectors at front panel 

■ Two on-board LEDs to signal LAN Link and 

Activity 

■ One RS232 UART (COM1) 

■ One RJ45 connector at front panel 

■ Data rates up to 115,2 kbits/s 

■ 16-byte transmit/receive buffer 

■ Handshake lines: CTS, RTS 

■ One UART (COM10) 


■ Accessible via I/O connector 

■ Physical interface at front panel using 

SA-Adapter via 10-pin ribbon cable on 

I/O connector 



■ Data rates up to 115kbits/s 


■ Handshake lines: CTS, RTS; DCD, DSR, DTR; RI 

■ GPIO 

■ 36 GPIO lines 


■ Connection via on-board I/O connector 

■ Further I/O depending on 

FPGA configuration 

Front Connections (Standard) 

■ Three Ethernet (RJ45) 

■ One RS232 UART (RJ45) 

FPGA 



■ 16Z070_IDEDISK – IDE controller 

for NAND Flash 

■ 16Z043_SDRAM – SDRAM contr. (16MB) 

■ 16Z023_IDE_NHS –IDE controller 

(PIO mode 0; non-hot-swap) 

■ 16Z025_UART – UART controller 

(controls COM10) 

PowerPC® 

MPC8540 

PCI 

Bus 

SDRAM 

Main 

(SO-DIMM) 

EEPROM 

RTC / 

Watchdog 

FPGA 

Boot 

Flash 

Ethernet 

10/100/1000Base-T 

Ethernet 

10/100/1000Base-T 

Ethernet 

10/100Base-T 

■ 16Z034_GPIO – GPIO controller 

(40 lines, 5 IP cores) 


customized I/O functionality. See website. 

Miscellaneous 

■ Real-time clock with GoldCap backup 

■ Power supervision and watchdog 

■ Reset button, GPIO-controlled 

■ Three user LEDs, GPIO-controlled; 1 FPGA 

power status LED 







PXI 

■ Four trigger lines compliant with PXI 

Specification R1.0 

F 

F 

F 

RS232 COM1 F 

SDRAM 

Additional 

PCI-104 P1 

NAND 

Flash 



I/O 


Option: Busless 

I/O Connector P2 

FRAM 

F Front Panel 

B On Board 

IDE 

GPIO 

COM10 

B 

B 

B SA F 


1


16 


F12N – 3U CompactPCI ® MPC5200B SBC 

■ -bit/ -MHz cPCI system slot, HP 

■ MPC 00B / 8 MHz 

■ FPGA 18,7 LEs (approx. ,000 gates) 

■ Up to 6 MB on-board DDR SDRAM 

■ Up to 8 MB boot Flash, NAND Flash 

■ MB SRAM, 16 MB graphics memory 

■ Dual Fast Ethernet, COM, USB (front) 

■ Dual CAN bus controller 

■ FPGA for user-defined I/O functions 

■ MENMON BIOS for PowerPC ® cards 

■ - 0 to +8 °C with qualified components 

CPU 

■ PowerPC ® 

■ MPC5200B 

■ Up to 400MHz 

Memory 

■ 2x16KB L1 data and instruction cache 

integrated in MPC5200 

■ Up to 256MB SDRAM system memory 

■ Soldered 

■ DDR 


■ Up to 1GB soldered NAND Flash (and more), 

FPGA-controlled 

■ 16MB additional SDRAM, FPGA-controlled, 

e.g. for video data and NAND Flash firmware 

■ Up to 8MB boot Flash 

■ 2MB GoldCap-backed SRAM, or: 128KB 

non-volatile FRAM 


PowerPC® 

MPC5200B 

Multifunction external bus 

Boot 

Flash 

SRAM/ 

FRAM 

SDRAM 

Main 

EEPROM 

RTC 

Watchdog 

Ethernet 

10/100Base-T 

RS232 COM1 

CAN bus 

SDRAM 

Additional 

PCI-104 P1 

FPGA 

F 

F 

USB 1.1 F 

NAND 

Flash 

B 

CAN bus B 


I/O 

Mass Storage 


■ One IDE port via 44-pin on-board connector 


■ PIO mode 0 support 



I/O 

■ USB 

■ One USB 1.1 port 


■ OHCI implementation 


■ Ethernet 

■ Two 10/100Base-T Ethernet channels 

■ One channel FPGA-controlled 

■ Two RJ45 or one D-Sub conn. at front panel 


■ RJ45 or D-Sub connector at front panel 

F Front panel 

B On-board 

SA 

SA 

Ethernet 

10/100Base-T 


I/O Connector P2 

Option: Busless 

F 

F 

IDE 

GPIO 

COM10 

F 

B 

B 

B SA F 



■ Handshake lines: CTS, RTS 

■ One UART (COM10) 

■ Accessible via I/O connector 


SA-Adapter via 10-pin ribbon cable on I/O 

connector 





■ Handshake lines: CTS, RTS; DCD, DSR, DTR; RI 

■ CAN bus 

■ Two CAN bus channels 

■ 2.0 A/B CAN protocol 


■ Connection via on-board connectors 

■ External transceivers using SA-Adapters 

■ GPIO 

■ 36 GPIO lines; FPGA-controlled 

■ Connection via on-board I/O connector 

■ Further I/O depending on FPGA configuration 

Front Connections (Standard) 

■ One USB 1.1 (Series A) 


■ One RS232 UART (RJ45) 

FPGA 



■ 16Z070_IDEDISK - IDE contr. for NAND Flash 

■ 16Z043_SDRAM - Additional SDRAM 

controller (16MB) 

■ 16Z023_IDENHS - IDE controller 

(PIO mode 0; non-hot-swap) 

■ 16Z087_ETH - Ethernet contr. (10/100Base-T) 

■ 16Z025_UART - UART contr. (controls COM10) 

■ 16Z034_GPIO - GPIO controller 

(40 lines, 5 IP cores) 



Miscellaneous 

■ Real-time clock with GoldCap backup 

■ Power supervision and watchdog 

■ Reset button, GPIO-controlled 

■ Three user LEDs, GPIO-controlled; 1 FPGA 

power status LED 







PXI 

■ Four trigger lines compliant with PXI 

Specification R1.0

F206N – 3U CompactPCI ® Nios ® II Slave Board 

■ -bit/ -MHz CompactPCI ® 

■ Peripheral slot function 

■ FPGA 1 ,000 LEs (approx. 1 ,000 gates) 

■ Nios ® II soft processor 

■ MB SDRAM, MB Flash 

■ Flexible FPGA-Flash structure 

■ Open platform FPGA development package 

■ Support of Wishbone and Avalon ® bus 


CPU 

■ Nios ® II soft processor, 33MHz 

Memory 

■ 512 bytes instruction cache and 512 bytes 

data cache integrated in Nios ® II 

■ 32MB SDRAM system memory 

■ Soldered 



I/O 


■ D-Sub connector at front panel 

■ Data rates up to 115kbits/s 


■ Handshake lines: full support 

■ For debugging 

■ Three 10-pin connectors 

■ For FPGA-controlled functions 

■ For use of SA-Adapters 

■ One receptacle for direct SA-Adapter 

connection at the front 

■ Two receptacles for direct connection of 

long SA-Adapters at the front 

■ Two optional plugs for on-board connection 

via ribbon cable 

■ Different physical layers through 

SA-Adapters : RS232, RS422, RS485, TTY, 

Ethernet, CAN bus, binary I/O, audio, PS/2 

■ One optional 40-pin plug connector 

■ For FPGA-controlled functions 

■ For use of SA-Adapters 

■ For on-board connection via ribbon cable 

■ Different physical layers through SA- 

Adapters : RS232, RS422, RS485, TTY, 

Ethernet, CAN bus, binary I/O, audio, PS/2 

FPGA 


■ Nios ® II soft processor 

■ 16Z014_PCI - PCI to Wishbone interface 

■ 16Z052_GIRQ - Global Interrupt Contr. (Nios ® ) 

■ 16Z052_GIRQ - Global Interrupt Contr. (CPU) 

■ 16Z069_RST - Reset Controller 

■ 16Z043_SDRAM - SDRAM controller (32MB) 

■ 16Z045_FLASH - Flash interface 

■ 16Z025_UART - UART contr. (contr. COM10) 


customized I/O functionality. See website. 

Miscellaneous 

■ Four user LEDs, FPGA-controlled 

■ Local PCI Bus 

■ 32-bit/33-MHz, 3.3V V(I/O) 

■ Compliant with PCI Specification 2.2 




■ Peripheral slot 

■ 32-bit/33-MHz PCI 

■ V(I/O): +3.3V 

■ Only one slot required on 3U cPCI ® backplane 

■ More supplementary CompactPCI ® slots 

required depending on SA-Adapters 



■ +5V (-3%/+5%), current depends only on 

mounted SA-Adapters 

■ +3.3V (-3%/+5%), 500mA typ. 



FPGA F Front Panel 

Nios® II 

GPIO for 

LEDs 

IP Core 

IP Core 

IP Core 

Avalon® Bus 

SA- 

Adapter 

 

Wishbone to 

Avalon® 

Bridge 

Avalon® to 

Wishbone 

Bridge 

Wishbone Bus 

Optional 

40-pin plug 

(can be assembled on request) 

SA- 

Adapter 

 


SA- 

Adapter 

 

PCI Slave 

Flash 

Interface 

SDRAM 

Interface 

B 

IP Core 

UART 

COM10 

IP Core 

SA- 

Adapter 

 

Compact PCI J1 

2 MB boot 

Flash 

32MB SDRAM 

10-pin 

receptacle 

B 

10-pin 

receptacle 

B 

B 

B 

B On Board 

SA- 

Adapter 

SA- 

Adapter 

SA- 

Adapter 

SA- 

Adapter 

Optional 10-pin plugs (can 

be assembled on request) 

F 

F 


17

Industrial Communication 

18 


3U CompactPCI ® Boards for Industrial Communication 

Industrial communication – wired or wireless – is an important mainstay in our time. Technologies such as GSM, 

GPS, WLAN or Ethernet are used especially in mobile applications. MEN provides a number of CompactPCI ® boards 

also for this segment. 

While the F209L, for instance, supports the WLAN IEEE 802.11b standard for WEP encryption, data transmission 

and an output power of 20 dBm, the F210 offers a combination of GPS, GSM and UARTs. 

With a wide selection of CompactPCI ® boards for industrial communication MEN products are also a perfect choice 

for applications in industrial automation as well as in trains, ships, buses or similar vehicles. 

F301 

p. 19 

F211 

p. 20 

F210 

p. 21 

F209L 

p. 22 

F206 

p. 23 

Type 

Ethernet 

Switch 

Fast 

Ethernet 

Interface 

GSM/GPS 

Interface 

WLAN 

Interface 

Octal UART 

CompactPCI ® 


32-bit/33-MHz, 








32-bit/33..66-MHz 

1 CompactPCI slot, 

3.3V VIO 

Memory 

max. 

2MB Flash, 

16MB DRAM 

Interfaces 

Up to 8 Fast Ethernet ports (front); 

1 Fast Ethernet controller (rear J1) 

Option: 1 Fast Ethernet port 

(rear J2) 

4 full/half-duplex 10Base-T 

or 100Base-TX Ethernet 

GSM-R (Rail) EGSM 900 / GSM 

1800, GPS according to NMEA 

0183, 2 UARTs 

1 WLAN interface on 2 Reverse 

SMA connectors, IEEE 802.11b 

Octal 16450 UART 

Physical layer via 

SA-Adapters (RS232/422/ 485, 

isolated/not isolated) 






F211 – Quad Fast Ethernet interface on 3U CompactPCI ® 

Local 

Extensions 

Altera Cyclone II 

for user-defined 

I/O functions 

Altera Cyclone 

for user-defined 

I/O functions 

On-board 

FPGA 

FPGA for 

custom I/O 

Software 

Driver software 

not necessary 

Windows, Linux, 

VxWorks, QNX 

Windows, Linux, 

VxWorks 

Windows, Linux 

Linux, VxWorks, 

Windows XP 

Applications 



industrial automation 












industrial automation

F301 – 3U CompactPCI ® 9-Port Ethernet Switch 

■ 8 HP -bit/ -MHz CompactPCI ® 

■ Up to 8 Fast Ethernet ports (front) 

■ 1 Fast Ethernet controller (rear J1) 

■ Option: 1 Fast Ethernet port (rear J ) 


Ethernet 

■ 9-port Ethernet switch device KS8999 

■ Eight 10/100Base-T transceivers 

■ Nine MAC units with integrated Layer 2 

switch 

■ 82551ER Fast Ethernet Controller 

Peripheral Connections 

■ Via front panel on 8 RJ45 or 6 D-Sub plug 

connectors 


■ Compliance with CompactPCI ® Specification 

2.0 R3.0 

■ Only one slot required on the 3U 

CompactPCI ® bus 


■ Compliance with PCI Specification 2.1 





■ +5V (-3%/+5%), 1200mA max. 

■ +3.3V (-3%/+5%), 400mA max. 






■ Weight: 200g 



■ -40..+85°C 












Port 

7 + 8 

RJ45 

RJ45 

Port 

5 + 6 

RJ45/ 

D-Sub 

RJ45/ 

D-Sub 

Port 

3 + 4 

RJ45/ 

D-Sub 

9-port 

Switch Device 

10/100Base-T 

RJ45/ 

D-Sub 

Port 

1 + 2 

RJ45/ 

D-Sub 


RJ45/ 

D-Sub 

Safety 



EMC 




conformity 


■ No software required except driver for 

82551ER Fast Ethernet controller 

PHY 

Port 9 

Ethernet 

Controller 

CompactPCI® J2 

(rear I/O) 



1


0 


F211 – 3U CompactPCI ® Quad Fast Ethernet Interface 

■ HP -bit/ -MHz CompactPCI ® 

■ full-duplex or half-duplex channels 

■ 10Base-T and 100Base-TX physical layer 

■ Fully integrated to comply with IEEE80 . u 

■ 1 00 V isolation voltage 

■ - 0 to +8 °C qualified 

Ethernet Interfaces 

■ Four 10/100Base-TX interfaces 

■ Four Micrel KSZ8841 controllers 

■ IEEE802.3x support 

■ Full-duplex flow control 

■ Half-duplex back pressure collision flow 

control 

■ Internal 8KB RX/TX FIFO buffers 

■ Auto-negotiation and auto MDIX crossover 

■ LinkMD ® cable diagnostics to determine 

cable length, cable faults and distance to 

fault 

■ Media Access Control (MAC) addresses 

stored in on-board serial EEPROMs 

■ 4x2 status LEDs to signal link status, activity, 

speed and collision 


■ Four standard 8-pin RJ45 receptacle 

connectors 








■ Isolation voltage: 1000V between Ethernet 

links and 1500V between Ethernet links and 

shield or ground 


■ +3.3V (-3%/+5%), 1A max. 

■ MTBF: 875,481h @ 40°C according to IEC/ 

TR 62380 (RDF 2000) 




■ Weight: 115g (standard version) 



■ -40..+85°C (qualified components) 





Isolation 

RJ45/ 

D-Sub 

RJ45/ 

D-Sub 

RJ45/ 

D-Sub 

RJ45/ 

D-Sub 

EEPROM 

EEPROM 

EEPROM 

EEPROM 

10/100Base-T 

Ethernet 

Controller 

10/100Base-T 

Ethernet 

Controller 

10/100Base-T 

Ethernet 

Controller 

10/100Base-T 

Ethernet 

Controller 








Safety 



EMC 




conformity 


■ Drivers for Windows ® , Linux and VxWorks ® 

from Micrel 

■ Driver for QNX ® from QNX ® (in preparation) 

PCI 

PCI-to-PCI 

Bridge 

PCI CompactPCI® J1

F210 – 3U CompactPCI ® GSM/GPS/UART Interface 


■ GSM-R (Rail) EGSM 00 / GSM 1800 

■ GPS according to NMEA 018 

■ GPS and GSM optically isolated from other functions 

■ UARTs via SA-Adapters 

■ FPGA for further user-defined functions 

■ Reverse SMA connectors to external antennae 

■ Extended temperature ranges 

■ Conformal coating 

GSM-R Interface 

■ GSM-Rail: Global System for Mobile 

Communications - Railway 

■ Frequency bands 

■ EGSM 900, GSM 1800 

■ Compliant to GSM Phase 2/2+ 

■ GSM class: Small MS 

■ Transmit power: 

■ Class 4 (2W) at EGSM 900 

■ Class 1 (1W) at GSM 1800 

■ GPRS connectivity 

■ GPRS multi-slot class 10 

■ GPRS mobile station class B 

■ Data Services 

■ GPRS data downlink transfer: 

max. 85.6 kbits/s 

■ GPRS data uplink transfer: max. 42.8 kbits/s 

■ Support of PAP (Password Authentication 

Protocol) and CHAP (Challenge Handshake 

Authentication Protocol) for PPP connections 

■ Support of PBCCH (Packet Switched 

Broadcast Control Channel) for enhanced 

GPRS performance 

■ CSD transmission rates: 2.4, 4.8, 9.6, 14.4 

kbits/s, non-transparent, V.110 

■ WAP compliant 

■ Internet services: 

TCP, UDP, HTTP, FTP, SMTP, POP3 

■ SMS 

■ MT, MO, CB, Text and PDU mode 

■ SMS storage: SIM card plus 25 SMS locations 

in the mobile equipment 

■ Transmission of SMS alternatively over CSD 

or GPRS (user-defined) 

■ MMS compliant 

■ Fax: Group 3, Class 2 

■ On-board SIM card interface 

■ Supported SIM card: 3V 

■ Coding scheme CS 1, 2, 3, 4 

■ Optical isolation: 1kV DC 

■ One antenna connector at front panel 

■ For the use of an external antenna 

■ Rugged screw connection 

■ Please note that MEN does not offer SIM 

cards or mobile telephony contracts! 

GPS Interface 

■ 20-parallel-channel GPS 

(Global Positioning System) receiver 

■ GPS Band/Code: L1 frequency, C/A code 

■ Integrated TCXO, RTC 

■ Horizontal accuracy: better than 2.1m (CEP) 

5.2m 2dRMS 

■ Time To First Fix (TTFF): 

■ Cold start: 34s typ. 

■ Warm start: 32s typ. 

■ Hot start: 0.5s typ. 

■ Sensitivity: 

■ Acquisition: -155dBm 

■ Navigation: -157dBm 

■ Tracking: -159dBm 

■ GPS modes 

■ TricklePower mode for power saving 

■ Push-To-Fix mode 

■ Protocol: NMEA 0183 

■ SiRF ® binary messages: altitude, longitude, 

elevation, velocity, heading, time, satellite 

tracking status, command/control messages 

■ SiRF ® binary interface: raw data 

■ Antenna voltage supervision 

■ 3GPP compliance 

■ Optical isolation: 1kV DC 

■ One antenna connector at front panel 

■ For the use of an external active antenna 


UARTs 

■ Two channels 

■ Accessible via on-board connectors 


SA-Adapters 

■ Two SA-Adapters can be directly plugged 

within 4HP 

■ Different physical layers depending on 

SA-Adapter: RS232, RS422, RS485 with or 

without optical isolation 

■ SA-Adapters to be ordered separately 

■ Data rates up to 2 Mbits/s 


■ Handshake lines: full support; 

lines depend on SA-Adapters 

F 

B 

Front panel 4 HP 

Antenna F 

Antenna 

Front connector 

On-board 

connector 

SA SA-Adapter 

Options 

Second 

front panel 

(+ 4 HP) 

F 

F 

GSM-R 

Controller 

GPS 

Controller 

F SA B 

F 

F 

F 

SA 

SA 

SA 

SA 

B 

B 



■ Two Reverse SMA antenna connectors 

■ Two cut-outs for SA-Adapters 

FPGA 



■ 16Z057_UART - UART controller (controls 

in-system GSM-R/GPS communication and 

UARTs) 









■ V(I/O): +3.3V 



■ Depends on mounted SA-Adapters and 

used functions 

■ +5V (-3%/+5%), 1900mA max. 

■ +3.3V (-3%/+5%), 850mA max. 

■ MTBF: 194,570h @ 40°C according to 

IEC/TR 62380 (RDF 2000) 




■ Front panel: 

■ 4HP with ejector 

■ 3U single-slot front panel for two antennae 

and up to two UART connectors 


Isolation 

UART TTL 

UART TTL 

User-defined 

User-defined 

User-defined 

FPGA 

SDRAM 

(option) 



1



F209L – 3U CompactPCI ® WLAN Interface 


■ IEEE 80 .11b 

■ Outdoor range up to 600 m 

■ Up to 11 Mbits/s per channel 

■ Output power 0 dBm 

■ Frequency band . GHz (DSSS) 

■ 0-bit or 1 8-bit WEP encryption 

■ Reverse SMA antenna connectors 

■ - 0 to +8 °C screened 

WLAN Interface 

■ IEEE 802.11b compliant 

■ Prism 2.5 chipset 

■ 40-bit or 128-bit WEP encryption, MAC filter 

and Access control 

■ Data rate up to 11Mbits/s per channel, 

auto fall-back 

■ Frequency band width 2.4GHz with Direct 

■ Sequence Spread Spectrum (DSSS) 

■ Outdoor range up to 600m 

■ Two antenna connectors at front panel 

■ For the use of external antennae 


■ Output power: 20 dBm (100 mW) typ. 

■ Receiver sensitivity: 

■ -91 dBm @ 11Mbits/s 

■ -92 dBm @ 5.5Mbits/s 

■ -93 dBm @ 2Mbits/s 

■ -95 dBm @ 1Mbit/s 

LED 

Antenna 

Connector 

Antenna 

Connector 

WLAN 

Controller 

PC Card 

■ Supported modulations: CCK (11Mbits/s, 

5.5Mbits/s), DQPSK (2Mbits/s), 

DBPSK (1Mbit/s) 

■ One activity LED 

■ Implemented through on-board PC Card 

■ Allows easy configuration of IEEE standard 

through different PC Cards 

■ IEEE 802.11a, IEEE 802.11b, or IEEE 802.11g 


■ Two Reverse SMA antenna connectors 







PC Card / 

CardBus 

Controller 




■ +5V (-3%/+5%), transmit operation: 400mA 

max., receive operation: 300mA max., 

sleep mode: 50mA max. 

■ +3.3V (-3%/+5%), 50mA max. 

■ MTBF (without WLAN PC card): 3,560,811h 

@ 40°C according to IEC/TR 62380 

(RDF2000) 




■ Front panel: 4HP with ejector 




■ -40..+85°C (screened) 












Safety 



EMC 




conformity 


■ Driver software for Windows ® and Linux

F206 – 3U CompactPCI ® Octal UART for SA-Adapters 

■ Octal 16 0 UART 

■ RS / / 8 /TTY, isolated/not isolated 

■ Large receive and transmit FIFOs 

■ Very high data rates up to Mbits/s 

■ Full handshake support 

■ Hardware flow control for RS 8 half duplex 

■ Physical layer via SA-Adapters 

■ -8 SA-Adapters (1- CompactPCI ® slots) 

■ Appl. for other protocols like HDLC 


UARTs 

■ Up to eight UARTs 

■ Accessible via on-board connectors 


SA-Adapters via 10-pin ribbon cable 

■ Diff. variations with SA-Adapters possible: 

■ RS232, RS422, RS485, TTY 

■ Data rates up to 2 Mbits/s 



on SA-Adapters 

FPGA 



■ 16Z054_SYSTEM - System unit 

■ 16Z025_UART - UART controller 

(controls COM10..COM13) 

■ 16Z025_UART - UART controller 

(controls COM14..COM17) 




Miscellaneous 

■ Four status LEDs 

Local PCI Bus 

■ 32-bit/33-MHz, 3.3V V(I/O) 

■ Compliant with PCI Specification 2.2 

CompactPCII ® Bus 




■ V(I/O): +3.3V 



■ +5V (-3%/+5%), current depends only on 

mounted SA-Adapters 

■ +3.3V (-3%/+5%), > 500mA typ. 

■ MTBF: 308,000h @ 40°C 

(derived from MIL-HDBK-217F) 




■ Single 3U front panel slot for up to 2 UARTs 

■ Up to three supplementary front panel slots 

required for overall eight UARTs 

■ Front panel: aluminum with 1 handle 




■ -40..+85°C (qualified components) 



■ Relative humidity (operation): max. 95% nc 

■ Relative humidity (storage): max. 95% nc 






Safety 



Additional 

Front 

Panels 

F 

B 

F 

F 

F 

F 

F 

F 

F 

F 

Front Panel 

On Board Connector 

SA 

SA 

SA 

SA 

SA 

SA 

SA 

SA 

B 

B 

B 

B 

B 

B 

B 

B 


Configuration 

Flash 

Update 

UART 

UART 

Config 

FPGA 

Cyclone 

EP1C12 

Configuration 

PLD 

Config 

CompactPCI J1 

Industrial Communication

Carrier Boards 


3U CompactPCI ® Carrier Boards for Extension Cards 

For realizing additional I/O or PC functions you can choose from a number of carrier cards from the MEN product 

range. The mezzanine slots are based on M-Module TM , PMC, XMC or PC-MIP ® /ANSI/IEC mezzanine standards. 

They offer flexible and individual extension of analog and binary I/O, field bus interfaces, networks or graphics. 

Using PCI mini cards or standard PC cards opens up the whole world of current notebook PC extensions and is 

thus a fast and easy way to extend the range of application. 

F213 

p. 25 

F212 

p. 25 

F209 

p. 26 

F207 

p. 26 

F205 

p. 27 

F204 

p. 27 

F203 

p. 27 

Type 

PMC Carrier 

PCI Express 

MiniCard 

PC Card Carrier 

PCI-104 Carrier 

F206I PC/104 Carrier 

p. 26 

M-Module 

Carrier 

M-Module 

Carrier 

PC-MIP Carrier 

CompactPCI ® 


32-bit/33-MHz or 

66MHz CompactPCI slot 






2 CompactPCI slots with 

one PCI-104 module 






Interfaces 

PCI Express MiniCard or Express 

Card 34 or Express Card 54 

CardBus (32-bit), PCMCIA/PC Card 

(16-bit),Type I, II and III 

PCI-104 

PC/104 






F212 – PCI Express ® MiniCard carrier 

Local 

Extensions 

1 PMC slot or 

1 PCI mini card slot 

Up to 2 cards at front via 4 SMA 

for HF applications (GPS, GSM, 

WLAN, UMTS, HSDPA) 

Up to 2 PC Cards at front 

Up to 4 PCI-104 modules 

1 PC/104 slot, PCI-to-ISA bridge 

2 M-Module slots 

1 M-Module slot 

3 PC-MIP slots 

Software 

PMC driver 

software 

Depending on 

PCIe MiniCard/ 

ExpressCard 

Depending on 

PC Card 

PCI-104 driver 

software 

PCI-104 driver 

software 

M-Module 

driver software 

M-Module 


PC-MIP driver 

software 

Applications 

Mobile computing, 

industrial automation, transportation, 












Industrial automation, 





instrumentation

F212 – 3U CompactPCI ® PCIe MiniCard Carrier 

■ 8 HP -bit/ -MHz CompactPCI ® 

■ Up to PCI Express ® MiniCards 

■ Optional Express Cards or 

■ For cards with internal USB interface 

■ For HF applications 


Card Interface 

■ Two PCI Express ® Mini Cards or 

■ Two ExpressCards type 34 or 

■ One ExpressCard type 54 

■ USB interface 

■ Please note that MEN does not offer SIM 

cards or mobile telephony contracts! 

PCI-to-USB Bridge 

■ 48MHz 


■ Four Reverse SMA antenna connectors 









■ +5V (-3%/+5%), depending on plugged 


■ 1 -bit/ -MHz or 66MHz PMC slot 

■ Optional PCI mini card slot 


Card 

Slot 

1 

Card 

Slot 

2 

USB 

USB 

PCI-to-USB-Bridge 

card, tbd max. w/o card 

■ +3.3V and 1.5V supply voltage for cards 

generated onboard 

■ MTBF: tbd @ 40°C according to IEC/TR 

62380 (RDF 2000) 





■ Weight: 172g (without cards) 



■ -40..+85°C (screened, only carrier, 

depending on configuration) 







F213 – 3U CompactPCI ® PMC Carrier 

Mezzanine Slots 

■ One PMC slot 

■ 32-bit, 33MHz or 66MHz 

■ Or one PCI mini card slot 

■ Type III (A and B) 

■ 32-bit/33MHz 





■ 32-bit/33-MHz PCI-to-PCI adapter 

■ V(I/O): +3.3V or +5V 



■ +5V (±3% typ.), depend. on mezzanine 

■ +3.3V (±3% typ.) 

■ MTBF: tbd @ 40°C according to IEC/TR 

62380 (RDF 2000) 





■ Weight: tbd (without cards) 



■ -40..+85°C (qualified) 

■ Airflow: depending on mezzanine 

■ Temperature range (storage): 

-40..+85°C 






■ Shock: according to EN50155; 

EN61373 category 1; class B 

F212 F213 



PCI Mini Card 

PMC 






Safety 



EMC 

■ Conforming to EN 55022 (radio 



conformity 


■ ExpressCard drivers as supported 




Safety 



EMC 

■ Tested according to EN55011 Class A, 

EN50121-3-2 (radio disturbance); EN50155, 

EN50121-3-2, EN61000-4-2 (ESD); 

EN50121-3-2, EN 61000-4-5 (surge), 

EN50155, EN50121-3-2, EN61000-4-4 

(burst) 

PCI 32-bit 

PCI 32-bit 


Option 

Carrier Boards


6 


F209 – 3U CompactPCI ® PC Card Carrier 

■ HP -bit/ -MHz CompactPCI® 

■ CardBus ( -bit) 

■ PCMCIA/PC Card (16-bit) 

■ Type I, II and III support 

■ Up to PC Cards at front 

■ - 0 to +8 °C screened 

LED 

LED 

Card 

Slot 

A 

Card 

Slot 

B 

PC Card / CardBus 

Controller 

Hot-Plug 

Power 

Switch 

F207 – 3U CompactPCI ® PCI-104 Carrier Board 

■ 1 PCI-10 slot 

■ For stacking of up to PCI-10 modules 

■ 8 HP CompactPCI ® 

with one PCI-10 module 

■ PCI-to-PCI bridge 

PCI-104 

PCI-104 

PCI-104 Module 

PCI-104 Module 

Module 

Module 

PCI-104 

Connector 

PCI-to-PCI 

Bridge 

F206I – 3U CompactPCI ® -ISA PC/104 Carrier Board 

■ 1 CompactPCI ® slot -bit/ -MHz (opt. 66 MHz) 

■ HP closed front panel 

■ 1 to PC/10 slots 

■ PCI-to-ISA bridge 

■ FPGA 1 ,000 LEs (approx.1 ,000 gates) 


PC/104 

Module 

ISA 

Configuration 

Flash 

Update 

Config 

FPGA 

Cyclone 

EP1C12 

Configuration 

PLD 

Config 


CompactPCI J1 

PCI 

CompactPCI J1

F205/F204 – 3U CompactPCI ® /PXI M-Module Carrier Boards 

■ 1 CompactPCI ® bus slot 

■ 1 M-Module slot 

■ Flexible PXI trigger routing 

F M-Module 

M-Module Interface/ 

PCI-to-Local-Bus 

Bridge 

FPGA 

CompactPCI 

PXI 

Bus 

F 

M-Module 

(F205) 

PXI Trigger Lines 


■ M-Module slots 

■ Flexible PXI trigger routing 

F203 – 3U CompactPCI ® /PXI PC-MIP ® Carrier Board 


■ PC-MIP ® slots 


■ Compliance with CompactPCI ® 

Specification 2.0 R2.1 

■ Only one slot required on the 3U 

CompactPCI ® bus 

■ DECchip 21150 PCI-to-PCI bridge 

■ Target and/or initiator on PCI bus 

■ Max. clock frequency 33MHz 

■ Power supply 5V and 3.3V 

■ Compliance with PCI Specification 2.1 

■ 32-bit PCI data bus 


PC-MIPs 

■ Up to three PC-MIP ® modules on one board 

■ Support of 1 Type I and 2 Type II modules 

■ Local 32-bit PCI bus 

Peripheral Connections 

■ Via front panel 



■ +5V (4.85V..5.25V), 5mA typ. 

■ +3.3V (3.2V..3.5V), 150mA typ. 

■ MTBF: 80,000h @ 50°C 

(derived from MIL-HDBK-217F) 




■ Front panel: aluminum with 1 handle 




■ 0..+60°C 

■ Industrial temperature range on request 



■ Relative humidity (operation): max. 95% 

non-condensing 

■ Relative humidity (storage): max. 95% 

non-condensing 






Safety 



F 

F 

PC-MIP 

Type II 

PC-MIP 

Type II 

PC-MIP 

Type I 


EMC 

■ Tested according to EN 55022 

(radio disturbance), IEC1000-4-2 (ESD) and 


conformity 

Local PCI Bus 

PCI-to- 

PCI 

Bridge 

CompactPCI 

Bus 


7

Housings and Turnkey Systems 

8 



The following pages show examples of individual packaging solutions as well as two different standard housings 

that can be used as evaluation platforms together with our 3U CompactPCI ® product range – from a PowerPC ® 

5200 based F12N consuming 1 Watt up to the latest Intel ® Core TM 2 Duo SBC consuming 47 Watts. With a 4-slot 

backplane in the standard compact desktop or wall-mount system (0701-0046) up to an 8-slot backplane in the 

standard rack-mount system (0701-0021) the range of available single-board computers can also be combined 

with any kind of additional I/O functionality. 

Whenever required we define and propose individual packaging tailored to the needs of the application in terms of 

performance, functionality and environmental conditions. Only a perfect knowledge of the final application allows 

to configure the optimum system from the board-level content to power management, including appropriate 

testing according to CE and environmental qualification. 

A small footprint system, for example, can just be built around a 2-slot backplane and a pluggable PSU. Programs 

and application may be stored directly on the CPU board in CompactFlash or on a hard disk instead of using extra 

space inside the housing. Even if Intel ® -based such a system can be installed without forced air cooling, destined 

to work in a -40 to +85°C temperature environment. Passive heat sinks take the power dissipation of the critical 

parts out of the system. 

Larger systems can for example be equipped with backplanes of up to eight slots or more, also supporting rear I/O 

via the backplane. Appropriate ventilation, power supplies and additional room for mass storages is considered 

depending on the application. 

Depending on the board combination in the system power supplies can reach from a low-cost firmly installed 

ATX up to pluggable models, delivering between 35 Watts up to 350 Watts and more. Depending on the type of 

application the technical requirements for the PSU may be different in terms of voltage input ranges, AC or DC 

supply, safety aspects (monitoring, self diagnosis) and environment (operation temperature, shock, vibration, 

humidity). For handling and maintenance purposes it may be necessary to use pluggable PSUs. 

More complex systems are built for example to support multiprocessing or hardware clusters based on a variety 

of tailored backplanes. For safety-critical and mission-critical applications we configure any kind of redundancy 

structure like 2oo3 or 2oo4 systems. 

Finally we offer CompactPCI ® to CompactPCI ® Express hybrid systems that combine the efficiency of a parallel bus 

system with the advantages of fast serial data transfer (as described on page 35). 

Rugged 21 HP Stand-Alone Cassette, Fanless 

■ -slot CPCI ® backplane 

■ W PSU - 6 VDC 

■ F1 SBC with Celeron ® M 

■ F601 side-card with IBIS and binary I/O 

■ EN 01 environmental qualification 






3U 84HP CompactPCI ® System 

■ 1-slot CPCI ® backplane 

■ W PSU 18-7 VDC 

■ F11N SBC with Celeron ® III and M1 connectors 

■ Optional - 8VDC PSU and WTB gateway 

■ EN 01 environmental qualification

Individual Solutions 

4U 84HP CompactPCI ® System, Fanless 

■ -slot cPCI backplane with USB and SATA 

■ redundant PSUs .6-66 VDC and - VAC 

■ F1 SBC with Celeron ® M or Core Duo, rear I/O 

■ F60 side-card with USBs and COMs 

■ Custom heat sink for F1 

Rugged Movie Camera Housing 

■ -slot cPCI backplane with USB and SATA 

■ F17 or F18 SBC with highest performance Core Duo 

■ F601 multimedia side-card modified with HDMI 

■ Gigabit Ethernet and power supply via backplane 

■ E-temp, custom heat sink for SBC 

■ Shock and vibration resistant, dust-proof 


■ 8-slot cPCI backplane 

■ W PSU - 6 VDC 

■ F1 SBC with Celeron ® M 

■ F601 multimedia side cards 

■ F 10 GSM/GPS/UART board 

■ F 1 WLAN on PCI mini card 


■ independent systems with redundancy function 

■ -slot cPCI backplane and separate PSU per system 

■ F1 SBCs with Pentium ® M 

■ System interconnection via Ethernet 

■ F 11 quad Ethernet cards 


■ independent control units in one 1 ” rack 

■ x 7-slot cPCI backplanes and separate PSUs 

■ F11N SBCs with Celeron ® III 

■ F 01 Ethernet LAN switch with 6 ports 

■ F 06 with UARTs and FPGA-driven I/O extensions 

■ Optional MVB or DIN bus extension 

■ - 0 to +8 °C operating environment 


Housings and Turnkey Systems


0 


Standard CompactPCI ® Rack – 8 Slots Single Eurocard 

■ 1 " rack-mountable 

■ IEEE 1101.10/11 compliance 

■ U/8 HP system + 1U fan tray 

■ U cards horizontal 

■ 8-slot U backplane 

■ System slot right 

■ Prepared for rear I/O 

■ Space for mass storage devices 

■ 00W ATX power supply 

■ For MEN SBCs F , F11, F1 , 

F1 , F1 , F1 , F17, F18 

General System Characteristics 

■ Compliance with IEC 60 297-3, IEEE 1101.10 

■ 8 slots for 3U Eurocard boards with rear I/O 

■ 8HP on the right for I/O extension, 

additional front panels etc. 


■ 19" rack-mount standard 

■ 3U card vertical 

■ 1U fan chassis with two vertical fans 

■ 3U/12HP bay for 3.5" floppy disk drive, 

3.5" hard disk drive 

■ Dimensions: 3U, 84HP, 278mm depth 

■ Weight: tbd. 

CompactPCI ® Backplane 

■ Compliance with CompactPCI ® Spec. 2.0 

Rev. 3.0 and IEC 61 076-4-101 (connectors) 

■ 8-slot 

■ 3U with rear I/O 

■ System slot on the right 

Power Supply 

■ PC power supply PS/2 

■ 3U/32HP 

■ ATX-PSU 300W 

■ 100V..240V AC wide range 

■ 48..63Hz 

■ Agency-approved: CE, UL Recognized 

Component mark 

■ Front-panel power connectors 

■ Front-panel power-on switch 


■ Temperature range (operation): 0..+50°C 

■ Power supply: 0..+40°C without derating 


■ Power supply: -20..+65°C without derating 







EMC 

■ Tested according to EN 55022 (radio disturbance), 

IEC1000-4-2 (ESD) and IEC1000-4-4 

(burst) with regard to CE conformity 

4U 

Slim-line CD-ROM 

Skizze 591MK151104 

Front View 

HDD 

3.5“ 

FDD 

3.5“ 

Rear View 

DC fan 

8-slot backplane 

DC fan 

Front panel 3U/44HP

Standard CompactPCI ® Desktop – 3 Slots Single Eurocard 

■ 1 " desktop or wall-mountable 


■ U / HP system (incl. 1U fan tray) 

■ U cards vertical 

■ -slot U backplane 

■ System slot right 

■ Space for 8 HP power supply 

■ For MEN SBCs 

F11N, F1 , F1 , F1 , F1 , F17, F18 



■ 3 slots for 3U Eurocard boards 

■ 2 slots for 3U 8HP PSU 

■ Additional space right of the system slot for a 

side card connected to the CPU board 


■ Desktop or wall-mounted 

(19" angular supports included in package) 

■ Fold-out support feet for desktop operation 


■ Dimensions: 4U, 24HP, 235mm depth 


CompactPCI ® Backplane 

■ 3-slot 

■ 3.3V V(I/O) 

■ CompactPCI ® system slot on the right 

■ Two CompactPCI ® peripheral slots 

Power Supply 

■ PSU not included 

■ 3U slot with P47 power connector for 8HP PSU 

■ Power input at the back at the bottom of 

the system (cable included) 

1U fan tray 

■ One horizontal fan 

■ 12V 

■ Air flow volume 95 m³/h (manufacturer's data) 

■ Dimensions 119 x 119 x 32 mm 

■ Sound power level 4.3 Bel 

■ Ventilation direction from the bottom 

to the top 



■ Up to -20..75°C 

(dependent on system configuration) 

Temperature range (storage): -40..+85°C 

■ Relative humidity (operation): max. 95%nc 






EMC 


IEC1000-4-2 (ESD) and IEC1000-4-4 




1

CompactPCI Express 


3U CompactPCI ® Express Boards 

PCI Express TM is the future of data transfer. In order to achieve a higher transfer rate, data is not transferred in 

parallel anymore but serially. A point-to-point connection with up to 4 Gbytes/s can be realized. 

This new bus standard among other things is a special feature of MEN’s Intel ® -based product family. The I/O 

functionality of the intercompatible single-board computers (from Celeron ® M, 1 GHz up to the newest Core TM 2 

Duo, 2.2 GHz) can be extended via different side cards. One of these, the F602, has a special function. Combined 

with this side card and a hybrid backplane the CompactPCI ® system slot boards F14, F15, F17 or F18 can be 

turned into system slot boards for CompactPCI ® Express. Thus mixed CompactPCI ® /CompactPCI ® Express systems 

can be built up. 

F18 

p. 5 

F17 

p. 6 

F15 

p. 7 

F14 

p. 8 

F602 

p. 34 

F700 

p. 34 

Type 





Side Card 

cPCI 


F14..F18 

XMC/PMC 

Carrier 

CPU 

Intel Core 

2 Duo up to 

T7500, 2.2GHz 

(64-bit CPU) 

Intel Core 

2 Duo up to 

T7400, 

2.16GHz 

(64-bit CPU) 

Intel Core 

Duo up to 

T2500, 

2GHz 

Up to Pentium 

M 760, 2GHz 

Celeron 

M 373, 1GHz 

CompactPCI ® 


32-bit/33MHz PCI system 

slot, 1 cPCI slot or 1 cPCI 

Express slot or stand-alone 

32-bit/33MHz 


1 CompactPCI slot or 

1 CompactPCI Express slot 


32-bit/33MHz 





32-bit/33MHz 






CompactPCI 

for power supply 

4HP, 1 CompactPCI 

Express slot 

Memory 

max. 

GB DDR2 DRAM 

(soldered), 



GB DDR2 DRAM 

(soldered), 



4GB DDR2 




1GB DDR2 









PCI Express ® for a higher data transfer rate 

Interfaces 

PCIe 6 lanes x1, 2 SATA, 


8 USB 2.0, 1 VGA, 1/2 DVI, 

audio (via front, extension 

cards or rear I/O) 



8 USB 2.0, 1 VGA, 1/2 DVI, 





8 USB 2.0, 1 VGA, 1/2 DVI, 





8 USB 2.0, 1 VGA, 1/2 DVI, 



4 PCI Express links x1, 

1 USB, 1 DVI, 1 COM 

via SA-Adapter (RS232/422/ 

485, isolated/not isolated) 

Local 

Extensions 


F600..F604 

see below 


F600..F604 

see below 


F600..F604 

see below 


F600..F604 

see below 


1 XMC slot (2 links 

x1/4/8) or 1 PMC slot 

(32-bit, 64-bit, PCI-X 

up to 133MHz) 

Software 

Windows, 

Linux 

Windows, 

Linux 

Windows, 

Linux 

Windows, 

Linux, VxWorks, 

QNX 

Windows 

XMC/PMC 


Applications 


robotics, 


multimedia 


robotics, 


multimedia 


robotics, 


multimedia 


robotics, 


multimedia 


robotics, 


Telecom, mobile 

computing, 

industrial autom., 

robotics, medical


■ Intel ® Core Duo T7 00, . GHz 


■ Full 6 -bit support ( GB memory addressable) 












■ 100% compatible to F1 , F1 , F17 


■ Intel ® Core Duo T7 00 or L7 00 





■ 100% compatible to F1 , F1 , F18 

F15 – 3U CompactPCI ® /Express Core Duo SBC 

■ Intel ® Core Duo T 00, GHz 




■ 100% compatible to F1 , F17, F18 

F14 – 3U CompactPCI ® /Express Pentium ® M SBC 

■ ULV Celeron ® M 7 , 1 GHz 

■ Up to Pentium ® M 760, GHz 

■ PCI Express ® four x1 links 



■ 100% compatible to F1 , F17, F18 


CompactPCI Express



F602 – 3U CompactPCI ® Express Side Card 

■ HP extension for U Intel ® SBCs F1 , F1 , F17, F18 

■ PCI Express ® links x1 to backplane 

■ 1 COM via SA-Adapter 

■ 1 USB .0 

■ 1 DVI connection 


CPU Board 

IDE (SATA) 

USB 2.0 F 

USB 2.0 

SDVO 

4x1 

PCI Express 

Links 

Board-to- 

Board 

Connector 

B On-board 

HDD 

USB-to-UART 

Bridge 

B SA 

DVI F 

■ 1 CompactPCI ® Express bus slot 

■ XMC slot ( PCI Express ® links) or 

■ PMC slot ( -bit, 6 -bit, PCI-X up to 1 MHz) 

F 

B 

F 

Front Panel connector 

On board connector 

SA SA-Adapter 

R Rear connector 

XJ2 

XJ3 

R 

Front 

Panel 

CompactPCI 


Backplane 

Connectors 

F700 – 3U CompactPCI ® Express XMC/PMC Carrier 

PMC 

Connectors 

XMC 

Connector 

J15 

XMC 

Connector 

J16 

PCI Expressto-PCI-X- 

Bridge 

Link 0 Lanes 4..7 

or 



Signal 

Switch 1 

Signal 

Switch 2 





Power supply 

CompactPCI 


Connector XJ4 

CompactPCI 


Connector XJ3 

CompactPCI 


Connector XJ2 

CompactPCI 


Connector XP1 

CompactPCI ® Express 

■ Compliance with CompactPCI ® Express PICMG 

EXP.0 R1.0 Specification 

■ CompactPCI ® Express conn. XP1 for power supply 

■ CompactPCI ® Express connectors XJ2 and XJ3 

for 4 CompactPCI ® Express links with 1 lane each 

■ CPU board F14 only supports 2 or 3 

CompactPCI ® Express links with 1 lane each 

■ CompactPCI ® Express connector XJ4 for control 

signals and ground 

I/O 

■ DVI 

■ One DVI-D connector at front panel 




■ Dual monitor support 

■ USB 

■ One USB 2.0 port 




■ High current up to 1A 

Mezzanine Slots 

■ One XMC slot 

■ PCI Express ® links: two links with one, 

four or eight lanes each 

■ Or one PMC slot 

■ 32/64-bit, 33/66MHz 

■ PCI-X, 133MHz 

PCI Express ® to PCI-X Bridge 

■ Support of PCI-X or PCI local bus specific. 2.2 

■ Support of one PCI Express ® link with 

up to four lanes 

Signal Switch 

■ Switches one or two links on one XMC conn. 

CompactPCI ® Express 

■ Compliance with CompactPCI ® Express 

PICMG EXP.0 R1.0 Specification 

■ CompactPCI ® Express conn. XP1 for power supply 

■ CompactPCI ® Express conn. XJ2 and XJ3 for two 

CompactPCI ® Express links with one, four or 

eight lanes each 

■ CompactPCI ® Express connector XJ4 for 

control signals and ground

CompactPCI ® Express Rack 0701-0041 – 8 Slots Hybrid 

■ 1 " rack-mountable 


■ U / 8 HP system (incl. 1U fan tray) 

■ 8-slot hybrid backplane 

■ Dual system slot in the middle 

■ cPCI Express ® peripheral slots to the right 

■ cPCI peripheral slots to the left 

■ CPCI slots prepared for rear I/O 

■ Space for mass storage devices 

■ 00 W ATX power supply 

■ For MEN SBCs F1 , F1 , F17, F18 



■ 8 slots for 3U Eurocard boards 

(4 slots with rear I/O) 


■ 19" rack-mount standard 


■ 3U/12HP bay for hard disk drives 

■ Dimensions: 3U, 84HP, 278mm depth 


CompactPCI ® /CompactPCI ® Express 

Backplane 

■ 8-slot 

■ CompactPCI ® System slot on the fourth 

slot from the left 

■ Three CompactPCI ® peripheral slots 

■ CompactPCI ® Express System slot 

on the fourth slot from the right 

■ Support of four CompactPCI ® Express links 

■ Three CompactPCI ® Express peripheral slots 

■ One slot with CompactPCI ® Express 

peripheral slot Type 1 

■ Two slots with CompactPCI ® Express 

peripheral slot Type 2 

Power Supply 

■ PC power supply PS/2 

■ 3U/32HP 

■ ATX-PSU 300W 

■ 90V..264V AC wide range 

■ 3,3 V/28 A, 5 V/30 A, 12 V/15 A, -12 V/0,8 A 

■ Internal 12 VDE fan (ball bearing) 

■ IEC AC input module with socket 

■ 47..63Hz 

■ Agency-approved: 

CE, UL Recognized Component mark 

■ Front-panel power connectors 

■ Front-panel power-on switch 

1U fan chassis 

■ Two vertical fans, 12V 

■ Air flow volume 204 m³/h 

(manufacturer's data) 

■ Dimensions 119 x 119 x 32 mm 

■ Sound power level 6.4 Bel 


■ Temperature range (operation): 0..+50°C 


■ Power supply: -20..+65°C without derating 







EMC 


IEC1000-4-2 (ESD) and IEC1000-4-4 


Slim-line CD-ROM 

Legacy Peripheral Slots 

32-bit with Rear I/O 

HDD 3.5" 

System 

Slot 

CPCI 


Front View 

DC Fan 

Rear View 

System 

Slot 

CPCIe 

CompactPCI Express Links 

Backplane 

CompactPCI 

System Slot 

Link 1 

Link 2 

8-Slot Backplane 

Peripheral 

Slot 

Type 1 


System Slot 

DC Fan 

Front Panel 3U/44HP 

Link 4 

Link 3 

Peripheral 

Slots 

Type 2 

CompactPCI Express

Embedded Solutions 

Our mission is to provide embedded computing and I/O solutions 

for demanding industrial applications while maximizing innovation, 

reliability and flexibility. 

Technology Partners 

Intel ® 

Semiconductor Supplier 

PowerPC ® Processors from 

Freescale Semiconductor 

QNX ® Real-time Operating 

System from QNX ® 

VxWorks ® Real-time 

Operating 

System from WindRiver 

Embedded Linux from 

Sysgo Real-Time Solutions 

FPGA Technology and 

NIOS ® Soft Processor Cores 

from Altera ® Corporation 

MontaVista 

Linux Software Supplier 

CANopen Protocol Stack 

from Vector Informatik 

Profibus Protocol Stack 

from Softing 

Arcobel 

Solution Provider Benelux 

19“ Rack Technology 

from Schroff ® 

ReFLEX CES 

Solution Provider France 

ACT/Technico 

Solution Provider USA 

LGA Nuremberg 

Environmental Qualification 

University of Applied Sciences, 

Nuremberg 

Research Partner 

Ordering and Shipping Information 

Member of 

The international user group 

for mezzanine technologies 

PXI Systems Alliance 

Open Standards Alliance 

PC/104 Embedded 

Consortium 

CAN in Automation 

PCI Industrial Computer 

Manufacturers Group 

USB –Universal Serial Bus 

PCI devices 

Intelligence for Traffic 

and Logistics – CNA 

■ For product ordering numbers please refer to the corresponding data sheets on MEN's websites. 

■ Hardware and software user manuals are ready for download from our websites. 

■ Software packages are ready for download from our websites. 

■ For technical support please refer to our websites or mail to support@men.de or call our support 

hotline in Germany under +49-911-99335-161 

■ Shipment is done ex works, excluding insurance, according to ZVEI (General Conditions of 

Supply and Delivery for Products and Services of the Electrical Industry). 

■ Minimum order value is EUR 100 or USD 200. 

■ Warranty on MEN products is 24 months. 

All brand or product names are trademarks or registered trademarks of their respective holders. 

Information in this document has been carefully checked and is believed to be accurate as of the date 

of publication; however, no responsibility is assumed for inaccuracies. 

MEN Mikro Elektronik ® accepts no liability for consequential or incidental damages arising from the 

use of its products and reserves the right to make changes on the products herein without notice 

to improve reliability, function or design. 

MEN Mikro Elektronik ® does not assume any liability arising out of the application or use of the 

products described in this document. 

The products of MEN Mikro Elektronik ® are not suited for use in nuclear reactors and for application 

in medical appliances used for therapeutical purposes. Application of MEN‘s products in such plants 

is only possible after the user has precisely specified the operation environment and after MEN Mikro 

Elektronik ® has consequently adapted and released the product. 

Germany November 2007. Copyright © MEN Mikro Elektronik ® . 

Printed in Germany. All rights reserved. 

ISO 9001:2000 ISO 14001:2005 

Germany 

MEN Mikro Elektronik ® GmbH 

(Headquarters) 

Neuwieder Straße 5-7 

90411 Nürnberg 

Phone: +49 (0) 911 99335-0 

Fax: +49 (0) 911 99335-901 

info@men.de 

www.men.de 

France 

MEN Mikro Elektronik ® SA 

18, rue René Cassin 

ZA de la Châtelaine 

74240 Gaillard 

Phone: +33 (0) 450 955 312 

Fax: +33 (0) 450 955 211 

info@men-france.fr 

www.men-france.fr 

USA 

MEN Micro, Inc. 

24 North Main Street 

Ambler, PA 19002 

Phone: (215) 542-9575 

Fax: (215) 542-9577 

sales@menmicro.com 

www.menmicro.com

3U CompactPCI®/Express Core™ 2 Duo SBC - The Simon Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?