Embedded Solutions
Embedded Solutions Embedded Solutions
VMEbus MEN 44 VMEbus VMEbus Basic System – 5U, 84HP, 6U card horizontal ■ 19" rack mountable ■ Highly compact subrack ■ 7-slot J1/J2 VMEbus backplane ■ Space for hard drive, floppy drive ■ Power supply ■ 2 fans ■ For all of MEN's 6U VMEbus SBCs General System Characteristics ■ 7 slots for 6U Eurocard boards ■ Ventilation using 2 DC fans (85..170m 3 /h) through back panel Mechanical Specifications ■ 19" rack-mount standard ■ 6U card horizontal ■ Dimensions: 5U, 84HP, 383mm depth ■ Weight: tbd. VMEbus Backplane ■ System bus J1/J2, 6U, IN board ■ Compliance with VMEbus Specifications IEEE 1014 and IEC 821 ■ 7-slot Power Supply ■ Power supply ■ 150/220W ■ 120V/230V AC/DC @ 3A ■ 47..63Hz ■ Agency-approved: VDE, UL, CSA ■ Back-panel power connector ■ Power-on switch Environmental Specifications ■ Temperature range (operation): 0..+50°C ■ Temperature range (storage): -25..+70°C ■ Relative humidity (operation): max. 95% nc ■ Relative humidity (storage): max. 95% nc ■ Altitude: -300m to + 3,000m ■ Shock: 15g/0.33ms, 6g/6ms ■ Vibration: 1g/5..2,000Hz EMC ■ Tested according to EN 55022 / 1999-05 (radio disturbance) and EN 55024 / 1999-05 (immunity) with regard to CE conformity Suited for MEN Boards... ■ All 6U VMEbus SBCs ■ Not suited for A201S versions with a VME P2 connector Plug-in PSU for 19" systems, 3U, 12HP ■ Input 110V DC nom. (66-154V) ■ Output 5.1V, 75W ■ -40..+85°C without derating ■ Conformal coating ■ Complies with EN 50155 ■ H15 DIN41612 male connector (front and rear)
SA-Adapters – Serial Line Physics for MEN Boards MEN SA-Adapters SA-Adapters are small universal boards providing the physics for legacy serial I/O, fieldbus interfaces and other small I/O functions. One serial line is provided per adapter, which can be plugged directly to the CPU board as a mezzanine. Alternatively, the adapter can be connected to the front panel via ribbon cable. The SA concept allows to add additional I/O interfaces to many of MEN's CPU boards, enhancing flexibility with regard to the line transceivers and isolation requirements. SA-Adapters can be used on the majority of MEN’s VMEbus, CompactPCI, ESM, PCI-104 or busless SBCs. Whether a specific SA-Adapter (or a mix of different SA-Adapters) fits on a specific CPU board is determined by a combination of mechanical and performance features, as well as FPGA and operating system criteria and needs to be verified for every board configuration requested. SA12 – Audio Codec AC’97 Interface Isolation Supported on MEN Boards 08SA01-00 RS232 No EM01, EM03, EM04/N, EM05, EM07, EM08, PP01 A4N, A9, A10, A11, A12a/b/c, A13a/c, A14, A15a/b/c, B5, B6, B11, B12 D2, D3a/b/c, D5, D6, F1N, F6, F7/N, F8, F9, F10, F11 SC13a/b/c, 090009 (Kahlua Box) P10, AD39, AD67, CT02, VT01 08SA02-00 RS422/RS485, Yes As on 08SA01-00 half duplex 08SA02-01 RS422/RS485, Yes As on 08SA01-00 full duplex 08SA02-07 RS422/RS485, Yes As on 08SA01-00 full duplex, -40..+85°C 08SA03-00 RS232 Yes As on 08SA01-00 08SA03-01 RS232, Yes As on 08SA01-00 -40..+85°C 08SA04-00 TTY Yes As on 08SA01-00 08SA08-00 CAN ISO high-speed Yes F8, F11 + call 08SA08-01 CAN ISO high-speed, Yes F8, F11 + call -40..+85°C 08SA09-01 Interbus-S master Yes Call 08SA10-00 Ethernet 10Base-FL, Yes B5, B6 FiberOptic UART, full duplex 08SA12-00 Audio Codec AC’97, Yes F8, F11 + call -40..+85°C 08SA13-00 PS/2 for keyboard/mouse, No F8, F11 + call -40..+85°C 08SA15-00 8 digital I/O lines, Yes F8, F11 + call -40..+85°C ■ For fast and convenient download of data sheets try our Product Quick Access ■ Up-to-date Product Compare Charts under www.men.de/products/ Designed for: -40 to +85°C operation temperature, shock, drop, bump, vibration, humidity, chemical resistance SA-Adapters 45
- Page 1 and 2: Embedded Standard Product Overview
- Page 3 and 4: System-on-Module ESM 52 Overview 54
- Page 5 and 6: 6U CompactPCI Boards D6 p. 18 D5 p.
- Page 7 and 8: F10 - 3U CompactPCI/PXI Pentium ®
- Page 9 and 10: F8 - 3U CompactPCI Infotainment SBC
- Page 11 and 12: F6 - 3U CompactPCI/PXI PowerPC Comm
- Page 13 and 14: F301 - 3U CompactPCI 9-Port Etherne
- Page 15 and 16: F206I - 3U CompactPCI-ISA Carrier B
- Page 17 and 18: F203 - 3U CompactPCI/PXI Carrier Bo
- Page 19 and 20: D5 - 6U CompactPCI PowerPC SBC ■
- Page 21 and 22: D3c - 6U CompactPCI PowerPC SBC wit
- Page 23 and 24: D302 - 6U CompactPCI Card with 128
- Page 25 and 26: CompactPCI Basic Systems - 4U, 84HP
- Page 27 and 28: Plug-in PSU for 19" systems, 3U, 12
- Page 29 and 30: PXI in Instrumentation MEN CompactP
- Page 31 and 32: 3U VMEbus Boards B12 p. 32 B11 p. 3
- Page 33 and 34: B11 - 3U VMEbus PowerPC SBC ■ Pow
- Page 35 and 36: A15c - 6U VME64 PowerPC SBC with PM
- Page 37 and 38: A14 - 6U VME64 PowerPC SBC ■ Powe
- Page 39 and 40: A12c - 6U VMEbus PowerPC SBC with P
- Page 41 and 42: A11 - 6U VMEbus PowerPC Workstation
- Page 43: VMEbus Basic System - 4U, 84HP, 3U
- Page 47 and 48: SC13c - 6U Busless PowerPC SBC with
- Page 49 and 50: Kahlua Box - Industrial Control Sys
- Page 51 and 52: Panel Computer UBox Vision - x86/Po
- Page 53 and 54: EM03A - ESM with MPC8560 (PowerQUIC
- Page 55 and 56: EM07 - ESM with Pentium ® III Embe
- Page 57 and 58: EM04N - ESM with PowerPC MPC 8245 E
- Page 59 and 60: EM02 - ESM with Pentium ® III Embe
- Page 61 and 62: ESM Starter Kits Embedded System Mo
- Page 63 and 64: PP05 - PCI-104 Module with WTB Inte
- Page 65 and 66: PP01 - PCI-104 Module with PowerPC
- Page 67 and 68: P518 p. 68 P517 p. 68 P501 - Functi
- Page 69 and 70: P18 - PC-MIP Frame Buffer Interface
- Page 71 and 72: P14 - PC-MIP IEEE 1394 OHCI FireWir
- Page 73 and 74: P10 - PC-MIP Quad RS232 UART ■ Fo
- Page 75 and 76: P4 - PC-MIP Ultra2 SCSI Controller
- Page 77 and 78: M62 p. 78 M37 p. 79 M36 p. 80 M33 p
- Page 79 and 80: M37 - 4 Analog Outputs ■ 4 curren
- Page 81 and 82: M35N - 8/16 Analog Inputs ■ 8/16
- Page 83 and 84: M82 - 16 Binary Inputs ■ 16 fast
- Page 85 and 86: M58 - 32-bit TTL I/O Interface ■
- Page 87 and 88: M28 - 16 Binary Outputs ■ 16 outp
- Page 89 and 90: M11 - 16-bit TTL I/O Interface ■
- Page 91 and 92: M72 Motion Counter p. 104 M54 p. 10
- Page 93 and 94: M78 - 4-Channel Digital Oscilloscop
VMEbus MEN<br />
44<br />
VMEbus<br />
VMEbus Basic System – 5U, 84HP, 6U card horizontal<br />
■ 19" rack mountable<br />
■ Highly compact subrack<br />
■ 7-slot J1/J2 VMEbus backplane<br />
■ Space for hard drive, floppy drive<br />
■ Power supply<br />
■ 2 fans<br />
■ For all of MEN's 6U VMEbus SBCs<br />
General System Characteristics<br />
■ 7 slots for 6U Eurocard boards<br />
■ Ventilation using 2 DC fans (85..170m 3 /h)<br />
through back panel<br />
Mechanical Specifications<br />
■ 19" rack-mount standard<br />
■ 6U card horizontal<br />
■ Dimensions: 5U, 84HP, 383mm depth<br />
■ Weight: tbd.<br />
VMEbus Backplane<br />
■ System bus J1/J2, 6U, IN board<br />
■ Compliance with VMEbus Specifications<br />
IEEE 1014 and IEC 821<br />
■ 7-slot<br />
Power Supply<br />
■ Power supply<br />
■ 150/220W<br />
■ 120V/230V AC/DC @ 3A<br />
■ 47..63Hz<br />
■ Agency-approved: VDE, UL, CSA<br />
■ Back-panel power connector<br />
■ Power-on switch<br />
Environmental Specifications<br />
■ Temperature range (operation): 0..+50°C<br />
■ Temperature range (storage): -25..+70°C<br />
■ Relative humidity (operation): max. 95% nc<br />
■ Relative humidity (storage): max. 95% nc<br />
■ Altitude: -300m to + 3,000m<br />
■ Shock: 15g/0.33ms, 6g/6ms<br />
■ Vibration: 1g/5..2,000Hz<br />
EMC<br />
■ Tested according to EN 55022 / 1999-05<br />
(radio disturbance) and EN 55024 / 1999-05<br />
(immunity) with regard to CE conformity<br />
Suited for MEN Boards...<br />
■ All 6U VMEbus SBCs<br />
■ Not suited for A201S versions<br />
with a VME P2 connector<br />
Plug-in PSU for 19" systems,<br />
3U, 12HP<br />
■ Input 110V DC nom. (66-154V)<br />
■ Output 5.1V, 75W<br />
■ -40..+85°C without derating<br />
■ Conformal coating<br />
■ Complies with EN 50155<br />
■ H15 DIN41612 male<br />
connector (front and rear)