HANDBOOK REQUIREMENTS - Central Maine Power Company

87
87
remov al
including the cost of all material not salvable for reuse.
Provis ion for temporary service can not be made until primary
conductors
and transformers have been installed.
Where
the UG system is already in place the contractor
may provide a suitable support for a meter and switch adjacent to
the transformer. The customer/contractor will provide and install
the secondary
cable from the transformer to the meter. All
connections
to the transformer will be completed by qualified
Company
employees.
Cable furnished by the contractor will not be maintained by
the Company.
For
details of a UG service structure, see Illustration No.s 9
and 11 in Section XII.
Where the UG system is to be installed as a part of a
residential
development, the contractor may provide a suitable
support for a meter at the approximate location of the permanent
service
and thereby avoid installation and removal costs of a
temporary installation. NOTE: the UG service must be built to
permanent service standards in order to take advantage of this
method (See Illustration No. 8, 9 or 11 in Section XII). The
Company may furnish and install the URD cable in its permanent
location
with sufficient slack to allow for transfer onto the
building,
subject to the cost provisions of paragraph 903 and
including
payment for the final transfer. The contractor must
arrange
to protect the cable from damage and assume
responsibility for the cost of any repairs or replacement required.