Download PDF - Home Automation, Inc

2 0 1 2 P R O D U C T C A T A L O G
Temperature Control Monitoring
These accessory products are specifically designed for use with your Omni and Lumina controllers. Sensors have
been enhanced with a special mounting bracket for improved environmental readings–indoor or outdoor.
14A00-8 Water Temperature Sensor 14A00-8
Module, probe, accessories, instructions. Allows you to monitor
and activate programs based on water temperature. Can be used
for pools, spas, aquatic ponds, fish tanks, greenhouses, etc. Sensing
range is 0–120ºF.
31A00-7 Extended Range Indoor/Outdoor
Temperature Sensor for HAI Omni/Lumina Controllers
Sensor from -40° to 120°F, accessory kit, instruction sheet. Allows
you to monitor and activate programs based on temperatures.
Can be used outdoors, in attics, basements, wine cellars, etc. Must
be connected directly to the HAI controller using a four conductor
wire. For enhanced accuracy, it may be calibrated after installation.
Includes mounting bracket.
31A00-8 Extended Range Indoor/Outdoor Temperature &
Humidity Sensor for HAI Omni/Lumina Controllers
31A00-8
Sensor from -40° to 120°F and humidity sensor, accessory kit,
instruction sheet. Must be connected directly to the HAI controller
using a four conductor wire. For enhanced accuracy, it may be
calibrated after installation. Includes mounting bracket.
1101A PESM 1101A
Used to override existing thermostats for set-back control or for
sensing and controlling other temperatures, such as attic fans, garage
fans, greenhouses, basements, wine coolers, humidors, etc.
www.homeauto.com
31A00-7
26A00-5 Freeze Watch Sensor 26A00-5
Sensor from -40° to 120°F. Also includes separate isolated contacts
with snap action switch designed to activate heating circuit at 42°F.
Use as backup to activate heat in areas prone to damage by freezing.
INTERNATIONAL
51
ENERGY MANAGEMENT