Download PDF - Home Automation, Inc

39A00-1
Case of 12
39A00-1CS
36A00-1
Case of 12
36A00-1CS
2 0 1 2 P R O D U C T C A T A L O G
Phase Coupler (1)
Phase Couplers (12)
For 120/240V electrical systems, the Phase Coupler increases the
speed and reliability of the HLC system. Although the HLC protocol is
extremely robust and less susceptible to power line conditions, HAI
recommends the use of a Phase Coupler in every installation.
10A09-7 Two Way X-10 Transceiver Kit 10A09-7
Two Way X-10 protocol power line carrier transceiver, 7 foot cable,
instructions. Adds X-10 control to all HAI controllers.
25A00-1 25A00-2 ALC Interface, 1 Branch
ALC Interface, 4 Branch
39A00-1
39A00-1CS
39A00-2 UPB Split-Phase Repeater 39A00-2
Designed to repeat UPB signal in installations requiring additional
signal strength. Must be used on a 120/240VAC split-phase 60Hz
powerline.
39A00-3 UPB Three-Phase Repeater 39A00-3
Required for use in three-phase installations when UPB devices
are installed on separate phases. Must be used on a three-phase
120/208VAC delta-wye, 60Hz powerline.
UPB Powerline Interface
Module with Cable (1)
UPB Powerline Interface
Modules with Cables (12)
36A00-1CS
UPB Powerline Interface Module (PIM) connects the lighting system
to an automation system or computer, which can then control the
lights—making the system accessible through the home computer or
from a remote location over the Internet.
36A10-1 HAI Lighting Control (HLC) Expansion Kit for Omni LT 36A10-1 110
VAC
Serial interface, cable and UPB Powerline Interface Module to add
HLC to Omni LT.
110
VAC
36A00-1 110
VAC
25A00-1
25A00-2
One branch ALC Hardwire Lighting Control Interface to control ALC
switches (1–31 lights). Four branch ALC Hardwire Lighting Control
Interface to control Legrand ALC switches (1–124 lights).
www.homeauto.com
41
ENERGY MANAGEMENT