magicolor 5430 DL Reference Guide - Konica Minolta
magicolor 5430 DL Reference Guide - Konica Minolta
magicolor 5430 DL Reference Guide - Konica Minolta
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
56<br />
Setting the Address Manually<br />
You may also manually change the printer’s IP address, subnet mask, and<br />
gateway by using the following instructions. (See chapter 2, “Understanding<br />
the Network Configuration Menus,” for more information.)<br />
�� When manually setting the IP address, turn off DHCP and BOOTP<br />
first.<br />
CAUTION<br />
You should always notify your network’s administrator before changing<br />
the printer’s IP address.<br />
1 Turn on your PC and printer.<br />
2 When the printer’s message window displays READY, set the IP address.<br />
Press this<br />
key . . .<br />
(until) the message window displays . . .<br />
READY<br />
MENU<br />
SPECIAL PAGES<br />
MENU<br />
NETWORK<br />
DHCP:OFF<br />
BOOTP:OFF<br />
IP ADDRESS<br />
192.168.1.2<br />
IP ADDRESS<br />
192.168.1.2<br />
Use the and keys to move to each of the four number triplets.<br />
(Leading zeros of each triplet are automatically suppressed; for example,<br />
“.001.” displays as “.1.”)<br />
Use the and keys to increase or decrease each number.<br />
IP ADDRESS<br />
xxx.xxx.xxx.xxx<br />
Network Connection