23.09.2012 Views

JIB CRANES WITH AN ARTICULATED ARM MANUALLY ROTATED

JIB CRANES WITH AN ARTICULATED ARM MANUALLY ROTATED

JIB CRANES WITH AN ARTICULATED ARM MANUALLY ROTATED

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

DONATI SOLLEVAMENTI S.r.l. - Via Roma, 55 - 21020 Daverio (VA) - Tel. 0332 942611 - Fax. 0332 948597<br />

Quarterly check of the efficiency of the brake of the rotation arm of the crane:<br />

• Check the stability of the arms when empty and when fully loaded, at the end points and<br />

intermediate points of rotation; then checking that the arms, in any point of the rotation, keeps its<br />

position with moving spontaneously.<br />

• When necessary have the brake of the crane adjusted, as described in paragraph 6.4.1 “Adjustment<br />

of the rotation brake of the crane arm”, on page 55.<br />

• Replace the clutch plates of the brake when there is instability of the arm<br />

after adjusting the brake.<br />

IN CASE OF <strong>AN</strong>OMALIES:<br />

• It is forbidden to carry out corrective maintenance work on the brake of the<br />

rotation arm of the jib crane.<br />

• Any operation, outside normal maintenance, on the brake of the rotation<br />

arm of the crane can be done by the assistance service of DONATI<br />

SOLLEVAMENTI S.r.l. or by staff authorized by them.<br />

Quarterly check of the efficiency of the electric power supply:<br />

53<br />

TECNICO<br />

DONATI<br />

DONATI<br />

SERVICE<br />

• Check the efficiency of the power cable, check there is no peeling, cuts , lacerations or other<br />

changes in the protection sheath.<br />

• Check the seal of the protectors, the power cable, their clamps (in the connector block) and,<br />

if necessary, tighten them correctly.<br />

• Check the efficiency of the conductors and the grounding connections, carrying out a check,<br />

and, if necessary, fixing all the grounding screws.<br />

• Carry out a check of all the weather strips of the covers and the cable clamps.<br />

• Check there are warning plates and that they are visible.<br />

• Do non hesitate to replace the electrical component, if it is no<br />

longer giving sufficient guarantee of functional reliability<br />

• Never carry out improvised repairs<br />

• Use original spare parts<br />

For information about checks of all the structural, mechanical and electromechanical<br />

components of the lifting units of the jib crane, see the relevant documentation<br />

included in this technical publication<br />

.<br />

• Don’t hesitate to replace the part and /or the component in question, when it no<br />

longer gives sufficient guarantee of safety and/or functional reliability.<br />

• Never carry out improvised repairs!

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!