23.09.2012 Views

JIB CRANES WITH AN ARTICULATED ARM MANUALLY ROTATED

JIB CRANES WITH AN ARTICULATED ARM MANUALLY ROTATED

JIB CRANES WITH AN ARTICULATED ARM MANUALLY ROTATED

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

DONATI SOLLEVAMENTI S.r.l. - Via Roma, 55 - 21020 Daverio (VA) - Tel. 0332 942611 - Fax. 0332 948597<br />

• NEVER use the crane to keep tension or to extract elements tied to the ground.<br />

• NEVER perform a hook run, after having positioned a load, in a way which causes the chain to<br />

wobble.<br />

• NEVER hit the supporting structures of the building, of machines and systems with the load or the<br />

arm.<br />

• NEVER use two cranes at the same time to lift the same load .<br />

• NEVER employ two simultaneous movements when using the crane, wait until tho movement has<br />

come to a complete stop before beginning another.<br />

• NEVER use the crane in unforeseen atmospheric conditions or, of installed outside, in hostile,<br />

unfavourable and /or dangerous atmospheric conditions (strong wind, heavy rain,etc. ).<br />

• NEVER use or act on the hoist in conditions where illumination and/or visibility are insufficient.<br />

• NEVER use the crane where the use of flameproof componentry is required.<br />

• NEVER use the limit switch devices and the overload device continuously.<br />

• NEVER approach at maximum speed the areas of “end of the runs” when rotating.<br />

• NEVER use the crane when there is a large drop in the voltage or when one of the phases is lacking.<br />

• NEVER perform sudden changes of direction during lifting and rotation operations.<br />

• NEVER press the control buttons on the push-button panel repeatedly.<br />

• NEVER modify the function characteristics of the crane and/or its components.<br />

• NEVER tamper with the settings of the safety-devices (limit switches, clutch device).<br />

• NEVER carry out temporary repairs or procedures for putting the machine back into operation which<br />

do not comply with the instructions.<br />

• NEVER use non-original spare parts or spare parts which have not been recommended by the<br />

manufacturer.<br />

• NEVER leave the crane at the end of a job without having implemented the safety procedures.<br />

• NEVER carry out maintenance, inspections or repairs without having put the crane out of service.<br />

• NEVER during maintenance work:<br />

• use unsuitable equipment<br />

• lean ladders on the column, on the hoist, on the trolley, or on the arm of the crane<br />

• work without personal protection devices<br />

• carry out work without having removed the load<br />

• NEVER use the crane if it is not totally responsive in all its operating functions.<br />

44

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!