JIB CRANES WITH AN ARTICULATED ARM MANUALLY ROTATED

DONATI SOLLEVAMENTI S.r.l. - Via Roma, 55 - 21020 Daverio (VA) - Tel. 0332 942611 - Fax. 0332 948597
4.3.6 Assembly of the electric system with the connector block
For the assembly of the electric system proceed as follows:
§ “Column” version – CBB series:
4. Connect to the terminals 4 contained in the connector block the electric cable 1 and the cable of line L
(inserted previously in the column- see 4.3.3 – Assembly column) - ( fig.42 ).
§ “Wall” version – MBB series:
1. Connect the electric cable 1 to the terminals 4 contained in the connector block,to be applied to the
column or load-bearing wall and to which the cable of line L coming from the power supply will be
connected ( fig.43 ).
fig.42
fig.43
30
fig.44
The user or installer assigned by the user must:
• install, in the immediate vicinity of the crane, a line switch, protected against short circuits,
showing its function with the appropriate label.
• Have earthing connected, to the structure of the crane, corresponding to the handling points
for this purpose