715631 ford top loader 4 speed transmission linkage rod kit for jeep ...

ADVANCE ADAPTERS INC. P/N: 715631
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 06-28-99
FORD TOP LOADER 4 SPEED TRANSMISSION
LINKAGE ROD KIT FOR JEEP CONVERSIONS
KIT CONSISTS OF:
No. Qty Part No. Description
1. 3 715649 BUTTONS
2. 6 715650 NYLON BUSHINGS
3. 3 715651 CLIP RINGS
4. 1 715653 LEVER - 3RD & 4TH
5. 1 715665 LINKAGE ROD - 1ST & 2ND
6. 1 715667 LINKAGE ROD - REVERSE
7. 1 715668 LINKAGE ROD - 3RD & 4TH
8. 1 715670 SHIFTER LEVER - 1ST & 2ND
9. 1 715675 LEVER-SAGINAW REVERSE
10. 3 303115 E-CLIP RETAINER V
SIDEVIEW
Top Loader 4 Speed
OPTIONAL ITEMS:
Qty Part No. Description
1 715600 SHIFT. TWR & HANDLE
1 715506 BRACKET
FRONT TOP VIEW
Top Loader 4 Speed
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.

ADVANCE ADAPTERS INC. P/N: 715631
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 2 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-18-92
FORD TOP LOADER 4 SPEED TRANSMISSION
LINKAGE ROD KIT FOR JEEP CONVERSIONS
INSTALLATION INSTRUCTIONS:
Mount the shifter body onto the Advance Adapter bracket. Position the three levers so that the alignment pin can be
installed. Install the 3 levers onto the transmission in the illustrated position. Rotate the transmission arms back and
forth and make sure that they have the necessary clearance and do not interfere with the other arms. On Saginaw and
Ford Top Loader conversions, it may be necessary to grind the reverse lever for additional clearance. Position the levers
into the neutral position. Install the rods into the levers using the nylon bushing and clip rings. Thread the buttons onto
the rods into a position that they will fit directly into the shifter body. It may be necessary to modify the rods on certain
applications for additional clearance. With all the rods and levers installed, you can now remove the alignment pin. You
must be able to shift the transmission into all gears and also reverse gear. The final adjustment is the stop bolts. Back
the stop bolts out of the shifter frame until only a few threads remain engaged. Push the stick firmly into 3rd gear and
hold. Screw in the 3rd gear stop bolt until contact is felt. Back the bolt out 1 turn and secure the lock nut. Repeat
the same procedure for the 4th gear stop bolt.
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.