Toshiba PROSEC T1-16S PLC User's Manual - CTi Automation

1. System Configuration
T-Series Handy Programmer (HP911A)
34 T1-16S User’s Manual
6F3B0253
The HP911A is a hand-held programmer, that can be used to program the T1-16S
using ladder diagram. Its portability makes it ideal for maintenance use at remote
locations.
The HP911A has the following features.
• The HP911A supports ladder diagram programming of T-Series programmable
controllers T1-16S, T2/T2E/T2N and T3.
• Built-in EEPROM allows program copy between T-Series controllers.
• Two display modes are available,
- Normal: 5 lines and 12 columns
- Zoom: Full device description
• On-line data set and I/O force are useful for system checking.
• Backlit LCD display allows operation in dim light.
There are two types of the Handy Programmer (HP911) depending on the cable
included with.
Type Part number Cable included with Versions available for T1-16S
HP911A THP911A∗S 2 m cable for T1-16S Ver 1.1 or later
HP911 THP911∗∗S 2 m cable for the upper
T-series PLCs
Ver 1.1 or later
The T1-16S can be used with the HP911(A). However, there are the following
functional limitations.
• The program size setting is only available as 2 k. It is set to 4 k mode in the T1-
16S.
• Some of the added instructions (MAVE, DFL, HTOA, ATOH) cannot be
edited/monitored.
NOTE
A 2 m connection cable for the T1-16S (Type: CJ102) is supplied with the
HP911A. The cable for the T2/T3 is available separately. (Type: CJ902, 2 m
length)
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net