Service Guide 2009 - Club Piscine
Service Guide 2009 - Club Piscine
Service Guide 2009 - Club Piscine
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
No HR signal from chest belt.<br />
No resistance (Electronic)<br />
For manual resistance models<br />
see ‘Brake Mechanism’<br />
Resistance settings at<br />
minimum and maximum<br />
incorrect.<br />
Noise (Transmission)<br />
No transmission<br />
Section 1<br />
1. Try new Battery in HR belt<br />
2. Check correct positioning of belt (See<br />
Owner’s Manual)<br />
3. Check for interference from other<br />
electronic devices. (See Owner’s Manual)<br />
4. Try new meter.<br />
1. Check RPM reading (See section above<br />
‘No RPM reading)<br />
2. Check profiles on display increase.(If not,<br />
probably a meter problem)<br />
3. Check condition of wiring and connections<br />
from Meter through to servo-motor/internal PCB.<br />
4. Can you hear servo-motor operating? If<br />
yes, may be brake mechanism problem (See<br />
section 2)<br />
5. If not above – it will be necessary to<br />
investigate internally. (See section 2)<br />
1. Adjust brake mechanism (See section 2).<br />
1. Belt is misaligned and or damaged/worn<br />
(See section 3)<br />
1. Belt may have disengaged from rear<br />
drum (See section 3)<br />
Opening up covers for internal repair and adjustment.