Service Guide 2009 - Club Piscine
Service Guide 2009 - Club Piscine
Service Guide 2009 - Club Piscine
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BREMSHEY TREADMILLS<br />
TESTING & IO MODE BUTTON PUSHES<br />
Scout Model<br />
TO ENTER TESTING MODE<br />
1. Turn on the treadmill and place safety key in position.<br />
2. Push and HOLD the “Enter/Select” key and then push and HOLD the<br />
“Start/Stop” key. Console will go into LED testing mode.<br />
3. Push “Enter/Select”key to go through the various modes until “0.0”<br />
appears in the SPEED window ( 6 pushes). Potentiometer values will<br />
show in the Time window.<br />
Compare values to chart in service manual for lift calibration.<br />
Check DISTANCES of the lift nut and frame per the manual.
Change language