A selection from TESA's general catalogue 2011 - Measuring Tools ...

www.tesabs.ch
A selection from TESA’s general catalogue 2011

For a detailed information about TESA’s products
www.tesabs.ch
• Browse our general catalogue on-line on
www.tesabs.ch
• Ask for your own hardcopy or CD on our website
www.tesabs.ch. To do so, select your continent and
your country first, then click RETAILERS.

Index
Calipers 2-5
External micrometers 6-9
Internal micrometers 10-11
Dial test indicators and supports 12-13
Dial gauges and supports 14-15
Bore gauges 16
Gauge blocks 17
Electronic indicators 18
Electronic equipment 19
Instruments for large dimensions 20-21
Height gauges 22-23
Surface roughness testers 24
TESA-REflEx Concept 25
TESA-vISIo 26-27
TESA-SCAn 28-29
mICRo-HITE 3D 30-31
TESASTAR 32
TESA Design
SWISS mADE
TESA Design – Product from
the European Community
TESA Design
Product produced outside Europe
Product from the
European Community
Product produced
outside Europe
www.tesabs.ch
SCS calibration
certificate
other calibration
certificate
Inspection
report
Inspection report with
a declaration of conformity
Declaration
of conformity
1

2
00560013
C
A
CAlIPERS
Vernier Calipers
– TESA’s models with locking screw.
Order
number
Dial Calipers
Designation measuring range
mm / in
B
www.tesabs.ch
3.2
3.7
1.5x1.9
00510041
A
B
00510008
15.5
A
B
vernier reading
mm / in
3.6
3.7
1.5x1.9
A
15.5
B
2
C
00530110
Dimensions, mm
A B C
00510041 SWISSCAL 2 0 ÷ 150 / – 0,02 / – 40 15,5 Ø 1,5
00510047 Standard 0 ÷ 150 / – 0,05 / – 40 15,5 Ø 1,5
00530103 Standard 0 ÷ 150 / 0 ÷ 6 0,05 / 1 /128 40 15,5 Ø 1,5
00530104 Standard 0 ÷ 200 / 0 ÷ 8 0,05 / 1 /128 50 18 1,5 x 2
00530105 Standard 0 ÷ 300 / 0 ÷ 12 0,05 / 1 /128 64 22 –
00530110 Standard 0 ÷ 150 / 0 ÷ 6 0,02 / 0.001 40 15,5 Ø 1,5
00530111 Standard 0 ÷ 200 / 0 ÷ 8 0,02 / 0.001 50 18 1,5 x 2
00530112 Standard 0 ÷ 300 / 0 ÷ 12 0,02 / 0.001 64 22 –
Robustness – High accuracy – Patented shockproof design – Ideal for use in the workshop – Easy
reading – Slider with metal dial housing.
Order
number
Designation measuring range
mm
Scale interval
mm
mm per
revolution
Dimensions, mm
A B C
00510008 CCMA-M 0 ÷ 150 0,02 2 40 13 74
00510045 CCMA-M 0 ÷ 200 0,02 2 50 18,6 89,5
00510046 CCMA-M 0 ÷ 300 0,02 2 64 20,6 105,5
00510050 CCMA-M 0 ÷ 150 0,01 1 40 13 74
Optional accessory
00560013 Depth foot
2
C
C

A
D
B
B
C
A
b
a
CAlIPERS
Calipers with rounded measuring faces
– With or without fine adjust device
Order
number
Depth Calipers
– TESA’s models with flat measuring faces.
Order
number
measuring range
mm / in
measuring range
mm
www.tesabs.ch
vernier reading
mm / in
vernier reading
mm
00510621
Dimensions, mm
a b A B
Without fine adjust device
00510509* 0 ÷ 200 / – 0,02 / – 17 3,5 80 5
00510506 0 ÷ 200 / – 0,05 / – 17 3,5 80 5
00510521 0 ÷ 300 / – 0,02 / – 20 4 90 5
00530521 0 ÷ 300 / 0 ÷ 12 0,02 / 0.001 20 4 90 5
00510522 0 ÷ 300 / – 0,05 / – 20 4 90 5
With fine adjust device
00510621 0 ÷ 300 / – 0,02 / – 20 4 90 5
00510641 0 ÷ 500 / – 0,02 / – 28 6 150 10
00510651 0 ÷ 600 / – 0,02 / – 28 6 150 10
00510671 0 ÷ 1000 / – 0,02 / – 32 8 150 10
* Provided with a flexible rule, 200 mm long.
Dimensions, mm
A B C D
00510133 0 ÷ 150 0,02 100 7,5 3 8
00510134 0 ÷ 150 0,05 100 7,5 3 8
00510143 0 ÷ 250 0,02 100 7,5 3 8
00510144 0 ÷ 250 0,05 100 7,5 3 8
00510163 0 ÷ 500 0,02 100 8,5 4 12
00510173 0 ÷ 600 0,02 150 8,5 4 12
00510509
00510143
3

4
TESA SHOP-CAL
With patented TESA capa µ system – Resolution to 0,01 mm / 0.0005 in
ABSOLUTE or DIFFERENTIAL measurements – High-quality precision mechanics – Large LCD
display – Easy to use – Excellent Price/Quality ratio.
Order
number
C
C
B
B
CAlIPERS
A
13
measuring range
mm / in
A
13
www.tesabs.ch
00530091
TESA CAL IP67 magna µ system
3.2
00530300
3.2
ø1.5
ø1.5
15.5
15.5
1,7
3,6 6
15,5
NEW
Thumb roller Dimensions, mm
A B C
00530091 150 / 6 • 40 16 71,5
00530092 200 / 8 • 50 20 89,5
00530093 300 / 12 • 64 22 105,5
With patented TESA magna µ system – Resolution to 0,01 mm / 0.0005 in
Highest degree of protection ever achieved for this type of hand-held tools – Totally immune to
the penetration of liquids and other particles.
Magnetic measuring system, a TESA technology guaranteeing full dependability and accuracy,
even in the thoughest conditions of use – SWISS MADE.
Order
number
measuring range
mm / in
1,7
15,5
1,7
4 6
Thumb roller RS232 Dimensions, mm
A B C
00530300 150 / 6 – – 40 16 71,5
3,6 6
4 6
00530301 150 / 6 • – 40 16 71,5
00530302 200 / 8 • – 50 20 89,5
00530303 300 / 12 • – 64 22 105,5
00530311 150 / 6 • • 40 16 71,5
00530312 200 / 8 • • 50 20 89,5
00530313 300 / 12 • • 64 22 105,5
15,5
1,7
15,5

A
A
B
C
B
Order
number
Order
number
Order
number
4
4
8,5
CAlIPERS
TESA IP67 magna µ system
Models with rounded measuring faces for internal dimensions
12
www.tesabs.ch
00530223
Models with rounded measuring faces and knife-edged jaws for internal resp. external dimensions
measuring range
mm / in
measuring range
mm / in
measuring range
mm / in
Knife-edged
jaws
A
00530233
00530243
C
B
Dimensions, mm
A B C
00530221 0 ÷ 200 / 0 ÷ 8 – 5 80 –
00530223 0 ÷ 300 / 0 ÷ 12 – 5 90 –
00530225 0 ÷ 600 / 0 ÷ 24 – 10 150 –
00530231 0 ÷ 200 / 0 ÷ 8 • 5 80 30
00530233 0 ÷ 300 / 0 ÷ 12 • 5 90 37
00530235 0 ÷ 600 / 0 ÷ 24 • 10 150 60
Model with rounded measuring faces and knife-edged jaws for internal dimensions
Dimensions, mm
A B C
00530230 0 ÷ 250 / 0 ÷ 10 5 80 54
Models with short cut measuring faces
Dimensions, mm
A B
00530241 0 ÷ 200 / 0 ÷ 8 100 8
00530243 0 ÷ 300 / 0 ÷ 12 150 8
5

6
Micrometer stand
For external micrometers up to 300 mm.
ETALON Basic
Order
number
Description
00160201 Micrometer stand with cast iron base
ø2
ExTERnAl mICRomETERS
5
00119046
Order
number
ISOMASTER AD with small measuring faces
ISOMASTER Aq for depth measurement
Measuring rods with a 25 mm step length – Scale interval to 0,01 mm.
Order
number
www.tesabs.ch
measuring range
mm
00119046 0 ÷ 25 0,01
00119047 25 ÷ 50 0,01
00119048 50 ÷ 75 0,01
00119049 75 ÷ 100 0,01
Order
number
measuring range
mm
00210101 0 ÷ 25 0,01
measuring range
mm
Scale interval
mm
Scale interval
mm
measuring face
mm
00211003 0 ÷ 150 50 x 15
Spherical element
for external micrometers
Fits on measuring inserts with a 6,5 mm diameter – Used to
measure tubing wall thickness, concave workpieces and the like.
Order
number
072103522 5
Ball tip diameter
mm

00310001
071115887
INTERAPID
Setting Standards
Order
number
02140001 25
02140002 50
02140003 75
02140004 100
02140005 125
02140006 150
Dimensions
mm
ExTERnAl mICRomETERS
TESAMASTER High Precision Micrometers
with digital counter to 0,1 mm
Analogue indication of the full millimetres, hundredths and fractions of hundredths – Error-free
reading to 0,1 mm on the counter – Parallax-free reading to 0,001 mm on vernier.
Order
number
ETALON 260
www.tesabs.ch
0
mm 0,01 mm
0,001 mm
Reversing the knurled sleeve renders the friction drive built into the thimble inactive.
Order
number
measuring range
mm
measuring range
mm
10
Scale interval
mm
0
0,1 mm
80
70
max. perm. error
µm
00310001 0 ÷ 25 2 1
00310002 25 ÷ 50 2 1,5
00310003 50 ÷ 75 3 1,5
00310004 75 ÷ 100 3 1,5
max. perm. error
µm
071115887 0 ÷ 25 0,002 2 2
071115888 25 ÷ 50 0,002 2 2
071115889 50 ÷ 75 0,002 3 3
071115890 75 ÷ 100 0,002 3 3
071115891 100 ÷ 125 0,01 4 3
071115892 125 ÷ 150 0,01 4 3
071115893 150 ÷ 175 0,01 5 4
071115894 175 ÷ 200 0,01 5 4
Set of 16 pairs of XB wires
for screw thread measurement
Used for measuring threads
according to the three-wire
method. The flank diameter can
either be determined arith metically
or with the aid of relevant tables
based on the measured actual size
– Suited for any standard external
micrometer with measuring faces
having a 6,5 mm
diameter.
Order
number
Wire diameters
mm
00240700 0,17 ÷ 3,20
Parallelism error
µm
Parallelism error
µm
7

8
ø2
5
ExTERnAl mICRomETERS
TESA MICROMASTER Electronic Micrometers
with digital display
With patented TESA capa µ system – Resolution to 0,001 mm / 0.00005 in
– Large LCD display for comfortable and sure reading.
– Models – EASY with simplified functions.
– IP54 protected against water splashes or
IP54 RS fitted with an RS232 digital interface.
Order
number
www.tesabs.ch
06030010
measuring range Range of indication Protection
mm in mm in
degree
MICROMASTER EASY
06030010 0 ÷ 30 0 ÷ 1.2 0 ÷ 30 0 ÷ 1.2 IP40 –
MICROMASTER IP54
06030020 0 ÷ 30 0 ÷ 1.2 0 ÷ 30 0 ÷ 1.2 IP54 –
06030021 25 ÷ 50 1 ÷ 2 23 ÷ 53 0.9 ÷ 2.1 IP54 –
06030022 50 ÷ 75 2 ÷ 3 48 ÷ 78 1.9 ÷ 3.1 IP54 –
06030023 75 ÷ 100 3 ÷ 4 74 ÷ 104 2.9 ÷ 4.1 IP54 –
MICROMASTER IP54 RS
06030030 0 ÷ 30 0 ÷ 1.2 0 ÷ 30 0 ÷ 1.2 IP54 •
06030031 25 ÷ 50 1 ÷ 2 23 ÷ 53 0.9 ÷ 2.1 IP54 •
06030032 50 ÷ 75 2 ÷ 3 48 ÷ 78 1.9 ÷ 3.1 IP54 •
06030033 75 ÷ 100 3 ÷ 4 74 ÷ 104 2.9 ÷ 4.1 IP54 •
06030071 100 ÷ 125 4 ÷ 5 98 ÷ 127 3.9 ÷ 5.1 IP54 •
06030072 125 ÷ 150 5 ÷ 6 123 ÷ 152 4.9 ÷ 6.1 IP54 •
06030073 150 ÷ 175 6 ÷ 7 149 ÷ 178 5.9 ÷ 7.1 IP54 •
06030074 175 ÷ 200 7 ÷ 8 174 ÷ 203 3.9 ÷ 8.1 IP54 •
TESA MICROMASTER
with small measuring faces
RS232
Measures grooves, feather grooves, splines and other difficult to reach locations – Small measuring
faces specially made to check small mechanical parts.
Order
number
measuring range
mm / in
06030034 0 ÷ 30 / 0 ÷ 1.2
30 mm measuring span

Order
number
measuring range
mm / in
TESA MICROMASTER with prismatic measuring faces
06030087 1 ÷ 7 / 0.04 ÷ 0.27
06030088 5 ÷ 20 / 0.20 ÷ 0.80
06030089 20 ÷ 35 / 0.80 ÷ 1.38
06030090 35 ÷ 50 / 1.38 ÷ 1.97
06030091 50 ÷ 65 / 1.97 ÷ 2.56
06030092 65 ÷ 80 / 2.56 ÷ 3.15
ExTERnAl mICRomETERS
TESA MICROMASTER
with prismatic measuring faces
06030087 00440002
Order
number
TESA MICROMASTER Micrometer Heads
Commonly used for checking any displacement on special fixtures, sliding tables, microscopes
and other machines or equipment. Without spindle lock.
Order
number
www.tesabs.ch
measuring range
mm
TESA MICROMASTER Depth Micrometer
Non-rotating measuring rod. Set of 6 measuring rods with a 30 mm step length also available.
ø6.5
31
47
ø12 h6
16
mounting
diameter
06030038 0 ÷ 30 12h6
Order
number
Diameter
mm
Measure cutting tools such as milling cutters
with uneven number of flutes, reamers
or taps. Determine roundness errors on
cylindrical parts. The 60° angle of the prism
aperture is convenient for 3-flute tools.
Application range
mm
Parallelism
error, mm
Cylindrical setting standards
00440001 5 0,5 –
00440002 20 0,7 1
00440003 25 0,7 1
00440004 35 1 1
00440005 45 1,2 1,5
00440006 50 1,2 1,5
00440007 65 1,5 1,5
145
measuring faces
mm
06030069 0 ÷ 90 / 0 ÷ 3.5 50 x 15
06030070 0 ÷ 180 / 0 ÷ 7 100 x 15
Cylindricity error
mm
Optional accessory
06060021 6-piece set of rods 0 ÷ 180 mm
9

10
InTERnAl mICRomETERS
TESA IMICRO with analogue indication, metric
00812304
TESA IMICRO with analogue indication
Full metric sets
00812300
Order
number
www.tesabs.ch
Self-centring and self-aligning internal micrometers. The highprecision
thread machined into the measuring cone, combined
with the measuring bolts specially arranged to provide 3-line
contact, make them the only micrometers in the world that
fully complies with the ABBE principle. Perform highly dependable
measurements, even at great depths.
Order
number
measuring range
mm
Application
range
mm
Single
micrometer
mm
Scale interval
mm
00813410 3,5 ÷ 4 0,001 4 / 4
00813411 4 ÷ 4,5 0,001 4 / 4
00813412 4,5 ÷ 5,5 0,001 4 / 4
00813413 5,5 ÷ 6,5 0,001 4 / 4
00810001 6 ÷ 8 0,001 4 / 4
00810002 8 ÷ 10 0,001 4 / 4
00810003 10 ÷ 12 0,001 4 / 4
00810801 11 ÷ 14 0,005 4 / 4
00810802 14 ÷ 17 0,005 4 / 4
00810803 17 ÷ 20 0,005 4 / 4
00811501 20 ÷ 25 0,005 4 / 4
00811502 25 ÷ 30 0,005 4 / 4
00811503 30 ÷ 35 0,005 4 / 4
00811504 35 ÷ 40 0,005 4 / 4
00812301 40 ÷ 50 0,005 4 / 4
00812302 50 ÷ 60 0,005 5 / 5
00812303 60 ÷ 70 0,005 5 / 5
00812304 70 ÷ 80 0,005 5 / 5
00812305 80 ÷ 90 0,005 5 / 5
00812306 90 ÷ 100 0,005 5 / 5
Setting ring
diameter
mm
max. perm. error/
Repeatability limit,
µm
00813409 3,5 ÷ 6,5 3,5 ÷ 4 4 –
4 ÷ 4,5 5,5
4,5 ÷ 5,5
5,5 ÷ 6,5
00810000 6 ÷ 12 6 ÷ 8 8 100
8 ÷10 10
10 ÷12
00810800 11 ÷ 20 11 ÷ 14 11 150
14 ÷ 17 17
17 ÷ 20
00811500 20 ÷ 40 20 ÷ 25 25 150
25 ÷ 30 35
30 ÷ 35
35 ÷ 40
00812300 40 ÷ 100 40 ÷ 50 50 150
50 ÷ 60 70
60 ÷ 70 90
70 ÷ 80
80 ÷ 90
90 ÷ 100
Extension
length
mm

Order
number
Order
number
measuring range max. perm. error /
mm in
Repeatability limit,
µm
06130101 3,5 ÷ 4 0.1377 ÷ 0.1574 4 / 4
06130102 4 ÷ 4,5 0.1574 ÷ 0.1771 4 / 4
06130103 4,5 ÷ 5,5 0.1771 ÷ 0.2165 4 / 4
06130104 5,5 ÷ 6,5 0.2165 ÷ 0.2559 4 / 4
06130105 6 ÷ 8 0.2362 ÷ 0.3150 4 / 4
06130106 8 ÷ 10 0.3150 ÷ 0.3970 4 / 4
06130107 10 ÷ 12 0.3970 ÷ 0.4724 4 / 4
06130108 11 ÷ 14 0.4330 ÷ 0.5512 4 / 4
06130109 14 ÷ 17 0.5512 ÷ 0.6693 4 / 4
06130110 17 ÷ 20 0.6693 ÷ 0.7874 4 / 4
06130111 20 ÷ 25 0.7874 ÷ 0.9843 4 / 4
06130112 25 ÷ 30 0.9843 ÷ 1.1811 4 / 4
06130113 30 ÷ 35 1.1811 ÷ 1.3780 4 / 4
06130114 35 ÷ 40 1.3780 ÷ 1.5748 4 / 4
06130115 40 ÷ 50 1.5748 ÷ 1.9685 4 / 4
06130116 50 ÷ 60 1.9685 ÷ 2.3622 5 / 5
06130117 60 ÷ 70 2.3622 ÷ 2.7560 5 / 5
06130118 70 ÷ 80 2.7560 ÷ 3.1496 5 / 5
06130119 80 ÷ 90 1.1496 ÷ 3.5433 5 / 5
06130120 90 ÷ 100 3.5433 ÷ 3.9370 5 / 5
Application
range
mm
Single
micrometer
mm
InTERnAl mICRomETERS
TESA IMICRO capa µ system
Full sets with digital display
Setting ring
diameter
mm
06130220 3,5 ÷ 6,5 3,5 ÷ 4 4 –
4 ÷ 4,5 5,5
4,5 ÷ 5,5
5,5 ÷ 6,5
06130221 6 ÷ 12 6 ÷ 8 8 100
8 ÷ 10 10
10 ÷ 12
06130222 11 ÷ 20 11 ÷ 14 11 150
14 ÷ 17 17
17 ÷ 20
06130223 20 ÷ 40 20 ÷ 25 25 150
25 ÷ 30 35
30 ÷ 35
35 ÷ 40
06130224 40 ÷ 100 40 ÷ 50 50 150
50 ÷ 60 70
60 ÷ 70 90
70 ÷ 80
80 ÷ 90
90 ÷ 100
TESA IMICRO capa µ system with digital display
A smart combination of the capacitive system with the IMICRO unique cone, both from TESA –
Resolution to 0,001 mm / 0.00005 in.
length of
extensions
mm
www.tesabs.ch
06130113
06130224
11

12
01630003
01810005
01811000
01860201
01860202
01860302
DIAl TEST InDICAToRS AnD SuPPoRTS
TESATAST Dial Test Indicators
Order
number
Scale interval
mm
SWISSTAST * Dial Test Indicators
Measuring Inserts
measuring span
mm
www.tesabs.ch
Dial diameter
mm
Circular
scale
Set of Dial Test Indicators
with Small Support
Stylus length
mm
01810005 0,01 0,8 28 0 ÷ 0,4 ÷ 0 12,53
01810006 0,01 0,8 38 0 ÷ 0,4 ÷ 0 12,53
01810007 0,01 0,5 28 0 ÷ 0,25 ÷ 0 36,53
01810008 0,01 0,5 38 0 ÷ 0,25 ÷ 0 36,53
01810009 0,002 0,2 28 0 ÷ 100 ÷ 0 12,53
01810010 0,002 0,2 38 0 ÷ 100 ÷ 0 12,53
Order
number
Scale interval
mm
measuring span
mm
Dial diameter
mm
Circular
scale
Stylus length
mm
01811000 0,01 0,8 28 0 ÷ 0,4 ÷ 0 12,53
01811001 0,002 0,2 38 0 ÷ 100 ÷ 0 12,53
* Same technical data as for regular models, but delivered with a stylus fitted with a 2 mm dia. ruby ball tip
no. 01860302.
Order
number
Ball tip Ball tip diameter
mm
Stylus length
mm
01860201 Carbide 1 12,53
01860202 Carbide 2 12,53
01860302 Ruby 2 12,53
01860212 Carbide 2 36,53
Order
number
Description
01630003 Set of dial test indicators with small support
consisting of :
01810005 Dial test indicator
01810010 Dial test indicator
01860203 Stylus
01840104 Mounting rod
01840105 Mounting rod
01860307 Wrench for styli
01639007 INTERAPID small support UJ 15

213
42.5
48.91
L1
DIAl TEST InDICAToRS AnD SuPPoRTS
TESA – IP65
Electronic Dial Test Indicator
18.4
Order
number
Order
number
1.5
35
8
17
1.5
1.5
58.3
12.5
36.5
measuring span
mm
17
66.3
COMPAC Dial Test Indicators To 0,01 mm
10.65
9.4
INTERAPID UJ 15 Magnetic Support
Description
01639007* INTERAPID UJ15 small magnetic support
with dovetail clamp and a 8 mm dia. clamping bore
ø27
Ideal for dial test indicators and dial gauges with dial diameter up to 40 mm.
– With two rigid joints and fine adjustment.
* Dial gauge is not supplied with the support.
ø40
www.tesabs.ch
8
numerical interval
mm
ø 44
– Inductive measuring
system, patented.
– Selectable scale intervals
on analogue display:
10, 20, 50 µm/1, 2, 5 µm.
– Water and coolant resistant
(IP65).
– Displayed modes
(NOR/MIN/MAX/MAX-MIN).
– RS232 data output
Stylus length
mm
measuring
force
01830001 0,8 0,01/0,001 / 0.0005/0.00005 12,5 0,13 N (±15%)
Order
number
measuring
span, mm
Scale interval
mm
Dial diameter
mm
Circular
scale
– Long range up to 3 mm.
– Two-way measuring.
No reversing lever.
– Continuous two-way clockwise
rotation of the pointer.
– Swivelling probe through
180° (see in the instruction
manual).
213 1,5 0,01 27 0 ÷ 25 ÷ 50 18
213G 1,5 0,01 40 0 ÷ 25 ÷ 50 18
212GL 3 0,01 40 0 ÷ 50 ÷ 100 36
Stylus
l1 in mm
13

14
ø8 h6
ø4
7
20,5
6
12 ø40
48
74,5
29
48.4
37
6
6.5 14.5
ø10
01419047 353
01410010
365S
Order
number
Reading
mm
01639017
DIAl GAuGES AnD SuPPoRTS
Precision Dial Gauges, 40 mm dial diameter
ø37
ø3
measuring span
mm
ø8 h6
ø4
ø5
ø40
(77.4)
www.tesabs.ch
29
48.4
37
ø37
6
ø3
6.5 14.5
ø10
Shock proof Travel per
revolution, mm
01639022
ø8 h6
ø4
ø5
ø40
(77.4)
Circular scale
01419047 0,01 5 • 0,5 0 ÷ 25 ÷ 50 –
353 0,01 5 • 0,5 0 ÷ 25 ÷ 50 –
Model protected against the penetration of liquids
353E 0,01 5 • 0,5 0 ÷ 25 ÷ 50 –
High-precision model
01410010 0,001 1 • 0,1 0 ÷ 50 ÷ 100 •
Model with restricted reading range
365S 0,002 ±0,08 • 0,2 8 ÷ 0 ÷ 8 –
Magnetic Supports
01639035
29
48.4
37
ø37
6
ø3
6.5 14.5
ø10
Dial lock
Order number measuring force, n measuring face, mm v-Base for diameters Application range, mm fine adjustment
01639017 ≈ 600 – 70 ÷ 220 – •
01639022* ≈ 700 – 30 ÷ 150 – •
01639035* – 100 x 115 – 0 ÷ 170 –
* Dial gauge is not supplied with the support.
Highly rigid arms and articulations.
ø8 h6
ø4
ø5
ø40
(77.4)

ø 58
1
33
16,5
7,5
ø 8
ø 5
M 2,5 - 6H
7,5
Order
number
13
7,5
ø 52
22
15
6
(108)
ø58
ø8 h6
0141760501 ø8 h6
01419048 01412511
532E
ø4.5
ø4
Reading
mm
ETALON Basic with short range,
62 mm dial diameter
7,5
22,5
18
6
DIAl GAuGES AnD SuPPoRTS
Precision Dial Gauges, 58 mm dial diameter
69
105
measuring span
mm
(105)
ø58
6
15.7
ø5
www.tesabs.ch
ø10
Shock proof Travel per
revolution, mm
9
ø3
ø53
50
43
62
ø8 h6
ø4
(142.5)
9
ø58
23
6
15.7 10
ø8 h6
6
ø5
Circular scale Dial lock
0141760501 0,1 10 – 10 0 ÷ 5 ÷ 10 –
01419048 0,01 10 – 1 0 ÷ 50 ÷ 100 –
01419049 0,01 30 • 1 0 ÷ 50 ÷ 100 –
532 0,01 10 • 1 0 ÷ 50 ÷ 100 –
Model protected against the penetration of liquids
532E 0,01 10 • 1 0 ÷ 50 ÷ 100 –
High-precision models
01412511 0,001 1 • 0,1 0 ÷ 50 ÷ 100 –
01412611 0,001 5 • 0,2 0 ÷ 100 ÷ 200 –
High-precision model protected against the penetration of liquids
01412711 0,001 1 • 0,1 0 ÷ 50 ÷ 100 –
Order
number
Reading
mm
measuring
span, mm
Shock proof Circular scale Displacement
range, mm
01419051 0,001 0,1 • 50 ÷ 0 ÷ 50 3,0
01419052* 0,001 0,1 • 50 ÷ 0 ÷ 50 3,0
* IP54 model protected against the penetration of liquids
Accuracy
Maximum permissible error:
– in one measuring direction throughout the measuring range, Ge 1 µm
– over any local range including any 10 scale divisions, Gt 0,7 µm
– in both measuring directions throughout the measuring range, Gges 1,2 µm
Repeatability limit, Fw 0,5 µm
Max. Hysteresis, Fu 0,5 µm
R31
18
ø3
ø53
72,5
50
57.5
85
108
01419052
15

(2:1)
16
M 2.3
3.5
Z
2.5 max.
~ 65
Z (2:1)
M 2.3
Z
5
5
10
0
10
15
INTERAPID
0
15
20
20
SWITZERLAND
~ 65
10 - 150mm
INTERAPID IRA 2
5
5
10
0
10
15
INTERAPID
0
15
20
20
SWITZERLAND
10 - 150mm
BoRE GAuGES
TESA VERIBOR Light
Bore gauges with two-point contact made to measure holes and form errors – Self-centring into
the bore – Can equally be used with a dial gauge, precision indicator or electronic probe having
a 8 h6 clamping shank diameter.
Order
number
www.tesabs.ch
05710092
Practical instrument for comparative measurement – Performs 2- or 3-point measurements,
depending on used accessory – Suitable for through holes, blind bores, grooves or undercuts as
well as for internal measurement on workpieces with plan parallel surfaces.
Order number
INTERAPID IRA 2, complete set
079105704
consisting of:
Application range
mm
measuring bolt travel
mm
measuring depth
mm
05710090 18 ÷ 35 1,30 176
05710091 35 ÷ 60 1,40 178
05710092 50 ÷ 150 1,40 178
05710093 18 ÷ 150 1,30 / 1,40 176 / 178
Dial gauge not included in the set.
– Wide application range
from 10 up to 150 mm.
– Easy handling thanks to its
convenient design and light
weight.
– Built-in indicator to
0,01 mm with fine setting.
– Centring device for
two-point measurement.
3 Steel inserts, hardened – 3 Short steel inserts, hardened – 3 Long steel inserts, hardened – 2 Adjustable
arms for bores ≥ 6 mm – 1 Small insert holder for 3-point measurement – 1 Large insert holder for 3-point
measurement – 1 Centring device for bores from 15 to 30 mm – 1 Centring device for bores from 30 to
150 mm – 1 Special screwdriver.

Order number
Steel
Order number
Carbide
TESA Metric Gauge Block Sets in
Steel, Tungsten Carbide or Ceramic
Nominal lengths from 1 to 100 mm
Order number
Ceramic
GAuGE BloCKS
Accuracy
grades
www.tesabs.ch
Set compositions
mm
32-Piece Set – M32
0651516027 0651526027 0651536027 K 1,005 1
0651515027 0651525027 0651535027 0 1,01 ÷ 1,09 0,01 9
0651511027 0651521027 0651531027 1 1,1 ÷ 1,9 0,1 9
0651512028 0651522027 0651532027 2 1,0 ÷ 9,0 1,0 9
10, 20, 30, 60 4
47-Piece Set – M47
0651516021 0651526021 0651536021 K 1,005 1
0651515021 0651525021 0651535021 0 1,01 ÷ 1,09 0,01 9
0651511021 0651521021 0651531021 1 1,1 ÷ 1,9 0,1 9
0651512021 0651522021 0651532021 2 1,0 ÷ 24,0 1,0 24
25 ÷ 100 25 4
88-Piece Set – M88
0651516014 0651526014 0651536014 K 1,0005 1
0651515014 0651525014 0651535014 0 1,001 ÷ 1,009 0,001 9
0651511014 0651521014 0651531014 1 1,01 ÷ 1,49 0,01 49
0651512014 0651522014 0651532014 2 0,5 ÷ 9,5 0,5 19
10 ÷ 100 10 10
112-Piece Set – M112
0651516012 0651526012 0651536012 K 1,0005 1
0651515012 0651525012 0651535012 0 1,001 ÷ 1,009 0,001 9
0651511012 0651521012 0651531012 1 1,01 ÷ 1,49 0,01 49
0651512012 0651522012 0651532012 2 0,5 ÷ 24,5 0,5 49
25 ÷ 100 25 4
122-Piece Set – M122
0651516011 0651526011 0651536011 K 1,0005 1
0651515011 0651525011 0651535011 0 1,001 ÷ 1,009 0,001 9
0651511011 0651521011 0651531011 1 1,01 ÷ 1,49 0,01 49
0651512011 0651522011 0651532011 2 1,6 ÷ 1,9 0,1 4
0,5 ÷ 24,5 0,5 49
30 ÷ 100 10 8
25, 75 2
Steps
mm
number of
gauge blocks
0651515021
17

18
28,5
28,5
18,4
18,4
• LCD display with both analogue
and digital indication.
• Mechanical tolerance
marks.
• Dimensions as per DIN
standard 878.
Order
number
ø8 ø8 h6 h6
ø4 ø4
53,1
53,1
68,4
68,4
121,5
121,5
7 7
27 27
ø57,1
ø57,1
134,4
134,4
01930230 01930241
01930258
7 7
27 27
ø57,1
ø57,1
ElECTRonIC InDICAToRS
TESA DIGICO 200 to 700
TESA DIGICO 205 and 305
Main functions:
ON/Auto OFF – Data output –
Counting sense reversal –
Lockable function keys.
Designation measuring span
mm / in
numerical interval
mm / in
TESA DIGICO 1 And 2 High Precision Indicators
Both models are remarkable for their simple functions, long range and high accuracy.
www.tesabs.ch
max. perm. error
µm
01930230 DIGICO 205 MI 12,5 / 0.5 0,01 / 0.0005 20 10
01930231 DIGICO 305 MI 12,5 / 0.5 0,001 / 0.00005 8 2
01930232* DIGICO 305 MIE 12,5 / 0.5 0,001 / 0.00005 8 2
01930241 DIGICO 410 MI 25 / 1 0,01 / 0.0005 20 10
01930250 DIGICO 505 MI 12,5 / 0.5 0,001 / 0.00005 4 2
01930251 DIGICO 510 MI 25 / 1 0,001 / 0.00005 5 2
01930258 DIGICO 705 MI 12,5 / 0.5 0,001 / 0.00005 4 2
* model protected to IP54
Order
number
Designation measuring span
mm / in
TESA DIGICO 400 and 500
ABS and REL modes – Both
display and keypad can be
rotated through 270°.
Additional functions:
PRESET mode – Tolerance
mode – Full RESET.
– Analogue and numerical indication. Possible orientation of
the analogue indication in a number of positions.
– Zero-setting anywhere within the measuring span.
– Numerical interval
0,001/0,01 mm – 0.00005/0.0005 in.
– Counting sense reversal.
– Limit values can be entered for classification purposes
through displayed symbols. Additional green, red or amber
background with the indicator connected to the mains.
– Value storage through the functions «Highest value»,
«Lowest value» or «Highest value minus lowest value».
max. perm. error
μm
01930000 DIGICO 1 30 / 1.18 2 1
01930001 DIGICO 2 60 / 3.36 3 1
TESA DIGICO 705
For bore gauges with 2-point
contact. Allows for zero-setting
of the indicator to lowest value
of the sett ing ring.
Value storage Max, Min, Max-
Min (TIR).
Repeatability limit
µm
Repeatability limit
μm

NEW
05030500
ElECTRonIC EquIPmEnT
TESA Electronic Probes With Analogue Output
These probes are specially designed for high-precision measurements by comparison. Each probe
can either be linked to a TESATRONIC display unit fitted with one or two probe inputs or to a BPX
interfacing box with multiple probe inputs (multigauging applications).
Order
number
03210802
www.tesabs.ch
03210904 NEW
03210924
TWIN Probes With Wireless
Connection
USB Probes
Designation measuring
range
mm
max. perm.
error
µm
Repeatability
µm
measuring
force
n
NEW
NEW
Plunger
retraction
03210904 GT 21 ± 2 0,2 + 3 • L 3 0,01 0,63 mechanical
03210924 GT 22 ± 2 0,2 + 3 • L 3 0,01 0,63 vacuum
03230041 GT 61 ± 5 1 + 4 • L 0,05 0,9 mechanical
03230042 GT 62 ± 5 1 + 4 • L 0,05 0,9 vacuum
03210802 GT 31 ± 0,3 0,2 + 50 • L 2 0,1 0,1 –
The wireless probes are made for use in any installation that
can not accommodate the cable of a common probe. Due to
their autonomy and their robust construction, they are able to
operate in the most hostile environment.
Order
number
Designation measuring range
mm
max. perm. error
µm
Repeatability
µm
Plunger
retraction
03230500* GTL21 W ±2 0,4 + 0,6 • L < 0,1 manual
03230501* GTL212 W ±1,5 0,4 + 0,6 • L < 0,1 pneumatic
03230502* GT61 W ±5 0,8 + 0,6 • L < 0,24 manual
03230503* GT612 W ±5 0,8 + 0,6 • L < 0,24 pneumatic
04760069 Charger for W-probes – Supplied with EU or US connector
05030012 TWIN Station (receiver with 8 probe inputs), including USB cable (1,80 m long)
* Resolution to 0,1 µm – Autonomy up to 4 weeks – Coverage (depending on surroundings) : ~20 m
Fitted with a USB interface, these TESA probes
can be directly connected to the PC. The use
of a USB multiplexer provides Users with a
flexible and cost-effective solution. In addition,
each probe offers a precision that remains
unchanged wherever zero-setting has occured.
Order
number
Designation measuring
range, mm
max. perm. error
µm
Repeatability
µm
05030010
05030012
03230200
measuring
force
n
03230200 GTL 21 USB ± 2 0,4 + 0,6 • L < 0,1 0,63
03230201 GTL 22 USB ± 2 0,4 + 0,6 • L < 0,1 0,63
03230202 GTL 222 USB ± 1,5 0,4 + 0,6 • L < 0,1 1,2
03230204 GT 61 USB ± 5 0,8 + 0,6 • L < 0,24 0,9
other models : see TESA general catalogue
19

20
InSTRumEnTS foR lARGE DImEnSIonS
TESA UNIMASTER Universal Instrument
Specially designed to measure very large internal and external dimensions, this universal measuring
instrument offers multiple possibilities of use.
01110000
ETALON 532 Internal Micrometers
Micrometers with two-point contact
Increased measuring range through extensions with built-in cylindrical standards – Screw type
system for quick assembly.
072109107
Order
number
www.tesabs.ch
Application range
mm
TESA UNIMASTER full set
01110000 Internal dimensions 250 ÷ 1475
External dimensions 225 ÷ 1450
consisting of:
01110300
1 Measuring element for internal dimensions 250÷275 mm or external
dimensions 225 ÷ 250 mm – 1 Pair of measuring bolts for internal measuring –
1 Pair of measuring bolts for internal/external measuring, L=75 mm – 1 Pair
of measuring bolts for external measuring, L = 100 mm – 1 Setting standard
for internal or external dimensions up to 250 mm or 225 mm, resp. –
Extensions of 25, 50, 75, 100, 125, 150, 300, 450 and 600 mm –
1 Special screwdriver for extensions – 1 Set of suspension accessories
(4 brackets along with 4 clamps) – 1 Wooden case for complete set –
Additional optional accessories.
Complete sets with order number 072109101 072109107 072109108 072109117 072109128
Application range in mm 50 ÷ 170 50 ÷ 290 50 ÷ 530 50 ÷ 1010 50 ÷ 1510
consisting of:
Order number Designation measuring
range, mm
072103576 Micrometer
element
Dimensions
mm
max. perm.
error, µm
50 ÷ 65 3 • • • • •
072103585 Extension 15 1,5 • • • • •
072105462 Extension 30 1,5 • • • • •
072109030 Extension 60 2 • • • • •
072103586 Extension 120 2 • • • •
072109055 Extension 240 3 • • •
072109066 Extension 480 3,5 • •
072109089 Extension 500 3,5 •

07739001
InSTRumEnTS foR lARGE DImEnSIonS
Interapid Light
Metric/Inch conversion – Hold function for displayed value – Uni/Bidirectional OPTO-RS data
transmission – Two adjustable origin points (Ref I / Ref II) – PRESET function – MIN/MAX mode –
Two limit values for classification purposes – Resolution 0,01 mm / 0.0005 in.
Order measuring max. perm. Repeata bility Total length Weight ,
number range, mm error, µm limit, µm fixed movable kg
jaw jaw
00590061 330 30 20 618 – 1,1
00590062 630 40 20 918 – 1,3
00590063 1025 60 20 – 1306 1,6
00590064 1525 150 20 – 1806 2
00590065 2040 250 30 – 2306 2,3
00590066 2545 350 30 – 2806 2,6
00590067 3050 450 40 – 3306 3
models 300 and 600 mm with a fixed jaw on the left side, or movable on any other model.
Order
number
Order
number
06030056
Application range
mm
measuring
range, mm
www.tesabs.ch
measuring
range, in
Dimensions in mm
Column Basis (l x H x W)
07739001 0 ÷ 300 0 ÷ 12 25 x 6 60 x 40 x 100
07739002 0 ÷ 600 0 ÷ 24 30 x 12 110 x 50 x 160
07739003 0 ÷ 1000 0 ÷ 40 30 x 12 110 x 50 x 160
00590062
TESA MICROMASTER capa µ system
with interchangeable anvils
Resolution to 0,001 mm / 0.00005 in
Each set includes 4 inter changeable
anvils with a stepped
length of 25 mm. Anvils are
adjusted and numbered in
sets, thus rendering any
correction of the indication
unnecessary.
Application range
in
max. perm. error
µm
06030047 0 ÷ 100 0 ÷ 3.94 6 3
06030048 100 ÷ 200 3.94 ÷ 7.87 7 4,5
06030049 200 ÷ 300 7.87 ÷ 11.81 8 7
06030050 300 ÷ 400 11.81 ÷ 15.75 9 9
06030051 400 ÷ 500 15.75 ÷ 19.69 10 9
06030052 500 ÷ 600 19.69 ÷ 23.62 11 9
06030053 600 ÷ 700 23.62 ÷ 27.56 12 10
06030054 700 ÷ 800 27.56 ÷ 31.50 13 12
06030055 800 ÷ 900 31.50 ÷ 35.43 14 12
06030056 900 ÷ 1000 35.43 ÷ 39.37 15 16
Additional measuring ranges up to 1500 mm upon request.
Parallelism error
µm
ETALON Height and Scribing Gauges
with numerical indication to 0,01 mm / 0.0005 in
21

22
00730047
Order
number
00730059
Designation measuring
span
mm / in
00730043
HEIGHT GAuGES
TESA-HITE, TESA-HITE plus M, TESA-HITE magna
TESA-HITE magna 400 / 700
made to withstand in severe
workshop conditions
Equipped with the patented TESA
magna µ system technology, these
two height gauges are designed
to remain unaffected even in
severe workshop conditions such
as liquid and oil splashing, dust
particles.
Each model is battery-powered
and can measure height or step
dimensions, diameters, centre-
to-centre distance of two bores
or two grooves, width of grooves,
and much more.
– Full protection of the electronics
against water, oils and dust
(IP65).
– Ability to determine parallelism
deviations.
– Patented TESA’s magnetic
sys tem guaranteeing a safe
oper at ing in extreme work shop
conditions.
– SCS certificate.
Application
range
mm / in
00730044
www.tesabs.ch
TESA-HITE 400 / 700
Precision in motion
Due to their robust and reliable
construction, both TESA-HITE 400
and 700 featuring TESA’s optoelectronic
system with incremental
glass scale are ideally suited
for dimensional inspection on
the shop floor.
Full autonomy is ensured through
battery power.
Each model measures height
or step dimensions, diameters,
cen tre distances and groove
width.
– Built-in air-bearing.
– Ability to determine parallelism
deviations.
– TESA exclusive system for
automatic detection of the
culminating point. Patented.
– Guaranteed high precision
through long-lasting stability
of the glass scale.
– SCS certificate.
max. permissible error
µm / in
(l in m / in)
00730045
TESA-HITE plus M 400 / 700
Precision in motion using the
motorised version
The added value of the motorised
TESA-HITE plus M 400 / 700 is
noticeable, not only in their tech-
nical features but also in their
ease of use.
– Full protection of the electronics
against water, oils and dust.
– Integrated air cushion, fixed
control panel.
– Easy, intuitive operatin through
the rotary power control.
– Provide all the functions of
a powerful motorised column,
including height, diameter,
distance, parallelism, perpendicularity,
straightness, angle
and 2D measurement besides
programming and automatic
performance of measurement
cycles, statistical data
processing.
– SCS certificate.
00730046
Repeatability
(2σ)
µm / in
00730043 TESA-HITE 400 415 / 16 0 ÷ 570 / 0 ÷ 22 2,5 + 4 • L / 0.0001+0.000004 • L < 2 / < 0.0001
00730044 TESA-HITE 700 715 / 28 0 ÷ 870 / 0 ÷ 34 2,5 + 4 • L / 0.0001+0.000004 • L < 2 / < 0.0001
00730045 TESA-HITE plus M 400 405 / 16 0 ÷ 560 / 0 ÷ 22 2,5 + 3 • L / 0.0001+0.000003 • L < 1 / < 0.00005
00730046 TESA-HITE plus M 700 705 / 27 0 ÷ 860 / 0 ÷ 33 2,5 + 3 • L / 0.0001+0.000003 • L < 1 / < 0.00005
00730047 TESA-HITE magna 400 415 / 16 0 ÷ 570 / 0 ÷ 22 < 8 / < 0.0003 < 3 / < 0.00015
00730059 TESA-HITE magna 700 715 / 28 0 ÷ 870 / 0 ÷ 34 < 8 / < 0.0003 < 3 / < 0.00015

TESA MICRO-HITE
350 / 600 / 900
manual or motorised versions
TESA MICRO-HITE, manual
Stand-alone height gauges for
1D or 2D measurements of
internal and external dimensions
on parts having flat, parallel or
cylindrical surfaces.
Automatic detection of the
culminating point on bores and
shafts.
Memory functions «max.»,
«min.» and «max.-min.» in
dynamic measurement.
Supplied with SCS certificate.
Manual versions
00730033 / 00730034 /
00730035
HEIGHT GAuGES
00730063 00730064 00730065
00760163
Order
number
TESA MICRO-HITE plus M,
motorised
These height gauges are different
from any other in that they
provide Users with exceptional
metrological performances
coupled with intuitive and easy
use. The unique rotary power
control combines the speed of
the manual concept with the
precision and simplicity of the
motorised one.
Supplied with SCS certificate.
Designation measuring
span
mm / in
Application
range
mm / in
www.tesabs.ch
Accessory Set
for Height Gauges
Order
number
Description
00760173 Small accessory set
Control Panels for
TESA MICRO-HITE Height Gauges
Order
number
Description
00760220 TESA POWER PANEL plus M
with printer
00760221 TESA POWER PANEL plus M
without printer
00760163 TESA POWER PANEL
for manual TESA MICRO-HITE
00760220
max. permissible error
µm / in
(l in m / in)
Repeatability
(2σ)
µm / in
00730033 TESA MICRO-HITE 350 365 / 14 0 ÷ 520 / 0 ÷ 20 2 + 3 • L / 0.0001+0.000003 • L ≤ 1 / < 0.00005
00730034 TESA MICRO-HITE 600 615 / 24 0 ÷ 770 / 0 ÷ 30 2 + 3 • L / 0.0001+0.000003 • L ≤1 / < 0.00005
00730035 TESA MICRO-HITE 900 920 / 36 0 ÷ 1075 / 0 ÷ 42 2 + 3 • L / 0.0001+0.000003 • L ≤ 1 / < 0.00005
00730063 TESA MICRO-HITE plus M 350 365 / 14 0 ÷ 520 / 0 ÷ 20 2 + 1,5 • L / 0.0001+0.0000015 • L ≤ 0,5 / < 0.000025
00730064 TESA MICRO-HITE plus M 600 615 / 24 0 ÷ 770 / 0 ÷ 30 2 + 1,5 • L / 0.0001+0.0000015 • L ≤ 0,5 / < 0.000025
00730065 TESA MICRO-HITE plus M 900 920 / 36 0 ÷ 1075 / 0 ÷ 42 2 + 1,5 • L / 0.0001+0.0000015 • L ≤ 0,5 / < 0.000025
23

24
SuRfACE RouGHnESS TESTERS
TESA RUGOSURF 20 and 10G
Portable, compact and robust roughness testers used in the production area as for receiving
inspection.
Order
number
Designation Roughness
parameters
www.tesabs.ch
06930013 06930011
Display Probe
rotation
Built-in
memory
06930013 Rugosurf 20 15 W/B, 2 in – •
06930011 Rugosurf 10G 33 Colour, 2 in 90° •
Delivered with a SB10 regular probe, roughness standard, adapter for regular probe, battery charger and battery.
TESA Electronic Inclinometer ClinoBEVEL 1 - USB
Universal inclinometer compactly sized for direct or comparative measurement – Measuring range
of ±45° with a clear indication of the angle or the slope – Reinforced housing made from anodized
aluminium – Large LCD display for error-free readout.
Order
number
Designation measuring range
mm
numerical interval
mm/m
TESA Spirit Level TESA Angle Protractor EAC
Conventional spirit level
for levelling flat or cylindrical
surfaces.
Order
number
Reading
mm/m
Dimensions
mm
05330203 TESA ClinoBEVEL 1 USB ±45° ≥ 0,02 100 x 75 x 35
Supplied with ClinoSofT as well as uSB cable for connecting the inclinometer to the PC.
Dimensions
mm
for shafts
mm
05331058 0,02 200 x 40 x 42 19 ÷ 108
Precision movement providing
a very low hysteresis.
Two-way reading.
Order
number
measuring
range
Scale
interval
Scale
length
mm
00630001 4 x 90° 5’ 200

MEASURING MACHINES ACCESSIBLE TO EVERyONE
The TESA-REflEx principle is the solution provided
by TESA to a problem faced by a number of industrial
products: how to make increasingly complex applications
simple without losing the performance acquired
by years of research and development ?
The software comes in 5 distinct modules, each being
dedicated to a different type of machine and metrology
application. These modules share a number of com-
TESA-REflEx
www.tesabs.ch
mon denominators, such as the automatic recognition
of a part feature.
The elements common to the presentation or execution
of the measurement tasks greatly facilitate training
in handling and using the modules. This results in
optimum ease of use for all machines built by TESA – a
decisive factor for reliable measurement operations as
well as performing equipment.
25

26
Order
number
TESA-viSio
machine type
TESA-REflEx
software tools
TESA-viSio
www.tesabs.ch
TESA-VISIO 200 GL – Manual
Although the TESA-VISIO 200 GL is built for the production area,
its small size makes it no less suited for use on the shop floor
as in the laboratory.
Fitted with a colour CCD-camera along with a high-precision
XY-coordinate table, also compatible with various illumination
and magnification systems, this machine can easily be installed
in demanding industry; for example, microelectronics,
micromechanics and the watchmaking industry.
When used in conjunction with TESA-REFLEX Vista, the machine
proves to be powerful and dependable for part inspection and
analysis.
TESA-Vista is a software module installed on any manual
TESA-VISIO. This software provides the operator with the needed
help functions, especially edge detection and light sources
monitoring. The measurements are, therefore, taken in the
optimum conditions.
This latest evolution adds the option of visual comparison
between the part and its CAD model. All operators accustomed
to the overlays used on profile projectors will appreciate this
new option.
Displacements Zoom Ringlight MPE x,y
µm (l in mm)
06830401 200GL VISTA manual manual, indexable 4 x 90° 2 + 10L / 1000
06830428 200GL VISTA manual motorised, 6,5x 4 x 90° 2 + 10L / 1000
06830601 300GL VISTA manual motorised, 6,5x 4 x 90° + 8 x 45° 2 + 4L / 1000
06830602 300GL VISTA manual motorised, 12x 4 x 90° + 8 x 45° 2 + 4L / 1000
06830634 300GL VISIOn DCC motorised, 6,5x 4 x 90° + 8 x 45° 1,6 + 4L / 1000
06830635 300GL VISIOn DCC motorised, 12x 4 x 90° + 8 x 45° 1,6 + 4L / 1000

TESA-VISIO 300 GL
– Manual or DCC
Featuring the same construction as the 200 GL machine
version, the TESA-VISIO 300 GL offers extensive light sources
and magnifications in addition to a 300 x 200 mm measuring
span.
This machine is available either in manual or DCC version
and runs TESA-REFLEX Vista or TESA-REFLEX Vision,
respectively.
The DCC version will check part series automatically, while
still remaining simple to use, simplicity being the very cornerstone
of the TESA-REFLEX principle.
TESA-REFLEX Vision is installed on every TESA-VISIO DCC –
i.e. the motorised machine version of TESA-VISIO 300.
In keeping with the TESA-REFLEX principle, this software
is very simple to use, whilst assisting the operator throughout
the programming process through to the final capture of the
measurements.
This results in combining TESA-REFLEX Vision with the
top-of-the-range TESA-VISIO 300 DCC, an extremely precise
and effective vision machine for checking series of parts.
MPE xy
µm (l in mm)
MPE z
µm (l in mm)
Measuring volume
mm
TESA-viSio
www.tesabs.ch
Max. weight
on the table, kg
overall machine
dimensions, mm
2,9 + 10L / 1000 2,9 + 10L / 1000 200 x 100 x 150 10 750 x 700 x 900 –
2,9 + 10L / 1000 2,9 + 10L / 1000 200 x 100 x 150 10 750 x 700 x 900 –
2,5 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 1000 x 1200 x 900 –
2,5 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 1000 x 1200 x 900 –
2 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 950 x 1100 x 900 •
2 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 950 x 1100 x 900 •
Joystick
27

28
TESA-ScAn
Order
number
Description Software Headstock clamping
02430090
02430091
TESA-SCAn 52
TESA-SCAn 52
TESA-REFLEX Scan
TESA-REFLEX Scan
–
•
2 male centres, TL02-0002
2 male centres, TL02-0002
www.tesabs.ch
TESA-SCAN 52 Ref lex-Click
This machine, like all machines produced
under the TESA-SCAn name, is initially
intended as an optical system that can
provide users with accurate static and
dynamic features when measuring turned
parts in record time.
But the most spectacular innovation in
the machine lies in its capability to recognise
a previously programmed part.
Simply pressing a button causes the machine
to scan the part to be measured. If the part
geometry matches an existing program,
the complete results are delivered in comparison
with preset nominal values.
Where no preset nominal values are
available, the TESA-REFLEX Scan software
provides the measurement results
obtained from the various dimensions that
could be detected. In many cases, this
is enough for sample inspection.
These two functions – unique to date and
specific to the TESA-REFLEX principle – make
the TESA-SCAn 52 REFLEX-Click an incomparably
user-friendly and effective inspection
tool for the workshop.
This module is based on experience acquired in the measurement
of turned parts applied to the TESA-SCAn 52 REFLEX-
Click, a completely innovative piece of equipment.
True to the TESA-REFLEX principle, the software will not only
just measure components without the need for any preliminary
programming, but also automatically recognize a part previously
measured by checking it against the programmes stored in
the memory.
TESA-REFLEX Scan makes TESA-SCAn 52 a general-purpose
machine unequalled to date, being both a true self-service
platform for measuring one-off parts, and a device for inspect-
ing large parts series.

Order
number
TESA-ScAn
Description notes Drawings
TL01-0003 Two-jaw gripper External clamping
for manual operation,
requires TL01-0027.
TL01-0027 Reducing sleeve for
Morse 2 to Morse 1
www.tesabs.ch
Ø 56
44 55
TL01-0009 Pair of external jaws 0 ÷ 6 mm T = 1,5
TL01-0010 Pair of external jaws 0 ÷ 6 mm T = 3
TL01-0011 Pair of external jaws 6 ÷ 12 mm T = 3
TL01-0012 Pair of external jaws 12 ÷ 18 mm T = 6
TL01-0013 Pair of external jaws 18 ÷ 24 mm T = 9
TL01-0038 Pair of external jaws 0 ÷ 6 mm T = 6
TL01-0040 Pair of external jaws 6 ÷ 12 mm T = 15
Z178-2026 Male drive centre,
40 mm dia., with a
Morse 2 taper shank
Diamond coated MK2
TL02-0017 Rotation centre,
Morse 2
TL02-0018 Rotation centre wth a
B12 taper male centre and
Morse 2 taper shank
Z178-0941 Female centre with a
B12 taper, 30 mm dia.
Diameter
µm (D in mm)
length
µm (l in mm)
overall part
dimensions, mm
Requires TL02-0018
Max. part
weight, kg
Ø 42
Ø 29
Ø 18
38
T
overall machine
dimensions, mm
MK2
92
ØD
88
22 17 68
2 + D / 100 5 + L / 100 D 0,5 ÷ 52 – L 300 4 1000 x 435 x 840 103
2 + D / 100 5 + L / 100 D 0,5 ÷ 52 – L 300 4 1000 x 435 x 840 103
MK2
MK2
B
MK1
Machine
weight, kg
29

30
Order
number
TESA MH3D
machine type
TESA-REflEx
control panel
TESA-MicRo-HiTE
www.tesabs.ch
TESA MICRO-HITE 3D,
manual
Featuring a modern yet well-proven design, each MH3D is made
from high-grade materials and components ensuring their
long-term dependability.
Available in the standard version or with fine adjust device, the
MH3D is ideally suited for the workshop or the production area.
Whether replacing or complementing usual manual toolings
for part inspection, this machine can well be used as multiuser
spots, when it is a question of proving the dimensional
compliance of one-off parts or small part series.
Installed on all manual CMMs from TESA for many years,
TESA-REFLEX MH3D has thousands of users all over the world.
This software includes help functions, such as the automatic
recognition of geometrical forms and shapes, that makes it
easily accessible to any operator through quick handling.
Although learned in a few hours only, it remains a safe bet
besides a pledge of reliability.
Based on the Windows EC technology, the intuitive user’s interface
available from the REFLEX panel is more reader-friendly
for higher user-friendliness.
Machine
displacements
Measuring
head
03939040 454 MH3D manual TESASTAR •
03939240 474 MH3D manual TESASTAR •
03939042 F 454 MH3D manual TESASTAR •
03939242 F 474 MH3D manual TESASTAR •
03939041 i 454 MH3D manual TESASTAR-i •
03939241 i 474 MH3D manual TESASTAR-i •
03939043 Fi 454 MH3D manual TESASTAR-i •
03939243 Fi 474 MH3D manual TESASTAR-i •
03939120 RC 454 MH3D manual / motorised TESASTAR-i •
03939122 RC 474 MH3D manual / motorised TESASTAR-i •
03939169 Recorder 454 Recorder manual / motorised / automated TESASTAR-i •
M3 styli kit,
no. 03969040

TESA MICRO-HITE 3D
RECORDER
The latest MH3D Recorder opens up a new path in the field
of tactile three-axis measurement. This hybrid machine
version makes it possible to take all measurements in both
manual and automatic modes. This innovation is the solution
to the problematic demands of parts inspection, from the
single part to the small series.
Due to its capability to automatically reproduce a part program
generated either manually or using a joystick, this machine
definitely makes automatic measurement accessible
to everyone. Since no preliminary programming is required,
reproducing a part program previously saved in the memory and
have a part series be checked in the same conditions is easy.
The TESA-REFLEX Recorder module has all the functions
of the software provided with the manual machines, plus a
command controlling the servomotor drives mounted on each
of the 3 machine axes.
This additional function enables the automatic reproduction
of each movement operated manually or through the joystick.
With TESA-REFLEX Recorder, programming of the range
of inspection operations becomes child’s play by just recording
any manual movement.
MPE E
µm (l in mm)
Measuring volume
mm
Max. weight on
the table, kg
TESA-MicRo-HiTE
www.tesabs.ch
overall dimensions
of each machine, mm
Machine
weight, kg
Joystick fine
adjustment
3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – –
3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – –
3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – •
3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – •
3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – –
3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – –
3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – •
3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – •
3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1700 210 • •
3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1730 315 • •
2,5 + 3,9L / 1000 440 x 490 x 390 227 1030 x 1100 x 1680 225 optional –
31

32
Order
number
TESASTAR-rp
TESASTAR-i M8
TESASTAR
M8/M8
50 mm
TESASTAR
Three hand-operated probe heads
In order to provide the optimum solution to every user’s need, TESA offers its CMMs
with three different probe heads from the TESASTAR programme, which also includes a
full range of high-precision SWISS MADE touch trigger probes and accessories for any
type of machines, whether hand-operated or CnC-controlled.
Description Repeatability
µm
TESASTAR TESASTAR-i TESASTAR-i M8
TESASTAR-p TESASTAR-mp
www.tesabs.ch
Repositioning
µm
visit our website and ask for our
Product info about all TESASTAR
probe styli and accessories available.
www.tesastar.com
Threaded
connection
03939020 TESASTAR ≤ 0,75 M3 –
03939030 TESASTAR-i ≤ 0,35 ≤ 1,5 M3 15°
03939031 TESASTAR-i M8 – ≤ 1,5 M8 x 45° 15°
increment

And more...
TESA UPD gauge block comparator
Measuring span of 25 mm – Allows a reduction of the number of
needed reference gauge blocks by nearly 80%.
TESA TPS motorised setting benches
For setting operations as well as for the calibration of display on
measuring instruments used for 2-point measurement.
TESA Calibrating And Setting Benches
Dual template system
(TESA’s patent)
TESA UPC gauge block comparator
For calibrating gauge blocks by comparison – Single or dual
template system for optimum ease of handling of the measured
gauge blocks.
ETALON POLO horizontal bench
For measuring precision workpieces as well as for calibrating
plug gauges and measuring instruments.

TESA – 70 years of
innovation in the world
of Metrology
It was indeed in 1941 that Jean-Georges Müller founded TESA SA, which was then oriented
towards the design of hand-held tools characterised by their innovative features.
Further to the development of the first precision tools based on a unique measuring cone,
TESA’s engineers worked to diversify the techniques used as a basis for all new measuring
means to be designed, intended for the most varied applications. Combining electronics
since 1970 in strict compliance with metrological principles, they worked successfully
to provide users with measurement solutions increasingly more efficient and ergonomic.
Throughout the years, the company was also able to select and integrate the know-how
and key products manufactured under the brands Etalon, Mercer, Standard Gage, Compac
and Cary, contributing to its leading position in the world of dimensional measurement.
Always focusing on resting its product developments on a Swiss manufacturing committed
to quality, the company invests each year in ultra-modern machining, assembly and
test equipment to ensure the reliability and productivity of its manufacturing processes.
In 2010, a major investment was made in the acquisition of a sophisticated storage and
logistics equipment, serving a new platform of international distribution at production
output.
To market its products, TESA relies on an extensive network of distributors worldwide,
supported by subsidiaries that can provide local service in the main countries of Europe,
Asia and United States.
As a member of the Hexagon AB group since 2001, which includes brand names such as
Leica, Leitz, DEA, Brown & Sharpe and more recently Intergraph, TESA takes part in the
business activities of this major player in the field of metrology and data processing, and
benefits from a large structure employing some 12,000 people in 42 countries.
Printed in Switzerland – All modifications reserved – 10012.062.1012
TESA SA – Bugnon 38 – CH-1020 Renens – Switzerland – Tel. +41(0)21 633 16 00 – Fax +41(0)21 635 75 35 – www.tesabs.ch – tesa-info@hexagonmetrology.com