Project Hammerfall® DIGI 9652 - RME

More documents

Recommendations

Info

21.4 ADAT Track Routing, MME at 96 kHz This diagram shows the signal paths in MME double speed mode (88.2 / 96 kHz). The devices available via wave driver have been designed to avoid conflicts in normal operation, which is why channels 5, 6, 7 and 8 of each ADAT device have been omitted. Signal routing is identical for record and playback. Device: The device name in the audio application SR: Sample Rate User’s Guide DIGI9652 © RME 28
22. CE and FCC Compliance Statements CE This device has been tested and found to comply with the EN55022 class B and EN50082-1 norms for digital devices, according to the European Council directive on counterpart laws in the member states relating to electromagnetic compatibility (EMVG). FCC This device has been tested and found to comply with the requirements listed in FCC Regulations, part 15 for Class ‘B’ digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates radio frequencies and, if not installed and used according to the instructions in the User’s Guide may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit off and on again, please try to eliminate the problem by using one of the following measures: • Relocate either this product or the device that is being affected by the interference • Use power outlets on different branch circuits, or install AC line filters • Contact your local retailer or any qualified radio and television engineer When connecting external devices to this product, compliance to limits for a Class ‘B’ device requires the use of shielded cables. FCC compliance statement: Tested to comply with FCC standards for home or office use. User’s Guide DIGI9652 © RME 29
Page 1 and 2: User’s Guide Project Hammerfall
Page 3 and 4: 1. Introduction Thank you for choos
Page 5 and 6: 6. Hardware Installation Before ins
Page 7 and 8: 8. Operation and Usage 8.1 External
Page 9 and 10: 8.3 Windows MME Playback The Hammer
Page 11 and 12: 8.5 DVD-Playback (AC-3/DTS) under M
Page 13 and 14: MME Check Input verifies the curren
Page 15 and 16: If several digital devices are to b
Page 17 and 18: 10.3 General Operation The green
Page 19 and 20: The heyday of (expensive) SCSI hard
Page 21 and 22: 15. Hotline - Troubleshooting 15.1
Page 23 and 24: 16. DIGICheck : Analysis, Tests and
Page 25 and 26: 20. Appendix RME news, driver updat
Page 27: 21.3 ADAT Track Routing, ASIO at 96

Project Hammerfall® DIGI 9652 - RME

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?