Wireless Music System with Docking for iPod - Agk Nordic

To repeat all tracks:
1. Load the disc in the player and begin playback.
2. Press the REPEAT button twice.
* The “ALL” indicator will appear in the display.
All tracks on the disc will be continuously repeated.
3. To cancel the repeat-playback mode, press the REPEAT button until the ALL indicators disappear from the display.
* Repeat mode can also be cancelled by opening the CD tray, by switching to TUNER or USB mode, or by pressing the STANDBY button to return
the system to the Standby (Off) mode.
Random Playback
The Random playback feature allows you to play all the tracks on a disc in random order. You can select random playback while the disc is playing
or when the player is stopped.
1. Load a CD into the player as usual, and then press the RANDOM button on the remote control.
* The “RAN” indicator will appear in the display.
* The player will randomly select a track from the disc and begin playback. Random playback will continue until all tracks have been played once,
whereupon the player will stop.
2. To stop Random playback, press the RANDOM button on the remote control once more.
* The “RAN” indicator will disappear, and normal playback will be resumed from that point.
Programmed Playback
The programmed playback feature allows you to program a total of 20 tracks in any desired order.
If desired, you can program the same track to be played several times within a certain program sequence.
NOTE:
You cannot program tracks during playback. If a disc is playing, first press the STOP button to discontinue playback before proceeding through the
programming steps below.
To program playback:
1. Load a disc into the player and wait while the player loads the disc’s Table of Contents.
2. Press the PROG. button on the remote control.
* Track 001 and Program Memory “P01”will appear in the display .
3. Then press the � or � button to select the track on the disc to be programmed.
Example: Track 07.
4. Press the PROG. button again to enter Track 007 in program memory #1. The program memory number advances to “P02”.
20