Xerox Document Centre 440/432/420 User Guide

N Up (2 Up - DC420)
Transparency options
Off the feature is not available.
Blank Dividers places a blank sheet of paper between each transparency.
No Dividers prints transparencies with no dividers, Copy Sets can still be
selected.
Printed Dividers an additional paper copy is automatically inserted after each
transparency.
Copy Sets prints additional paper sets of the transparencies. Select Copy
Sets and use the number keypad to enter the quantity required.
HINT: If a paper tray has been loaded and the tray attributes
have been programmed it is not necessary to assign a tray for
transparencies. The DC440/432/420 automatically detects the
tray that contains the transparencies.
NOTE: To avoid overheated or distorted transparencies do not
copy onto transparencies without selecting Transparencies
first.
DC440/432 this feature prints two or four independent documents on to
one sheet of paper. The DC440/432 reduces/enlarges the
images as needed to print them either in landscape or portrait
orientation on one page based on the paper supply selected.
DC420 this feature is available as 2 Up. It enables two independent
documents to be printed side by side on to one sheet of paper.
It reduces / enlarges the images as needed to display them in
landscape orientation on one page.
Xerox Document Centre 440/432/420 User Guide Page 3-35
Copy