Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
� Load the documents in the document feeder. � Make the required feature selections. � Select [Output Format]. � Select [Transparencies]. Following the instructions, select the option required. � Load the transparency stock. � Programme [Change Tray Attributes]: •Select [Type]. Use the up / down scroll arrows to display the transparency option. Select [Transparency] and select [Save]. •Select [Colour] then [Clear] and then [Save]. � Select [Start]. NOTE: A maximum quantity of 1 can be selected. Page 3-34 Xerox Document Centre 440/432/420 User Guide
N Up (2 Up - DC420) Transparency options Off the feature is not available. Blank Dividers places a blank sheet of paper between each transparency. No Dividers prints transparencies with no dividers, Copy Sets can still be selected. Printed Dividers an additional paper copy is automatically inserted after each transparency. Copy Sets prints additional paper sets of the transparencies. Select Copy Sets and use the number keypad to enter the quantity required. HINT: If a paper tray has been loaded and the tray attributes have been programmed it is not necessary to assign a tray for transparencies. The DC440/432/420 automatically detects the tray that contains the transparencies. NOTE: To avoid overheated or distorted transparencies do not copy onto transparencies without selecting Transparencies first. DC440/432 this feature prints two or four independent documents on to one sheet of paper. The DC440/432 reduces/enlarges the images as needed to print them either in landscape or portrait orientation on one page based on the paper supply selected. DC420 this feature is available as 2 Up. It enables two independent documents to be printed side by side on to one sheet of paper. It reduces / enlarges the images as needed to display them in landscape orientation on one page. Xerox Document Centre 440/432/420 User Guide Page 3-35 Copy
- Page 39 and 40: Powering Off When powering off the
- Page 41 and 42: Stand-by Mode Prior to entering Low
- Page 43 and 44: � Select [Machine Setups]. � Se
- Page 45 and 46: Modes Features button Job Status bu
- Page 47 and 48: Print Queue Maintains pending and a
- Page 49 and 50: Faults Displays a list of the six m
- Page 51 and 52: � Select [Machine Status]. � Se
- Page 53 and 54: Auditron Access Screen � Use the
- Page 55 and 56: Labels At point-of-need throughout
- Page 57 and 58: 3 Copy This chapter contains inform
- Page 59 and 60: � Before placing the documents in
- Page 61 and 62: Constant Velocity Transport Glass 2
- Page 63 and 64: 4. Enter the quantity � Use the n
- Page 65 and 66: Standard Features (Copy) Output Qui
- Page 67 and 68: 1,2,3. � Select and release the b
- Page 69 and 70: � With the documents face up, sli
- Page 71 and 72: Portrait Images Landscape Images. H
- Page 73 and 74: Paper Supply - Normal — reduces o
- Page 75 and 76: Image Quality options Text used for
- Page 77 and 78: Image Adjustment tab (Copy) � Sel
- Page 79 and 80: To produce size for size copies �
- Page 81 and 82: Bound Originals options Off the fea
- Page 83 and 84: Expert Image Quality � Select the
- Page 85 and 86: Edit (optional) Erase options Off n
- Page 87 and 88: Area Edit options Off the feature i
- Page 89: Output Format (Copy) Quick Pathway
- Page 93 and 94: Annotation � Load the documents.
- Page 95 and 96: � If Off is selected, select comm
- Page 97 and 98: Inserts � Load the insert stock i
- Page 99 and 100: � After the last entry has been m
- Page 101 and 102: � Select either [Front Only] or [
- Page 103 and 104: Job Assembly (Copy) Build Job Quick
- Page 105 and 106: Stored Jobs � Program the job fea
- Page 107 and 108: � Select [Added Features] and the
- Page 109 and 110: Name the name of the job. For copy
- Page 111 and 112: Use the scroll buttons to move thro
- Page 113 and 114: 4 Fax Sending and receiving a facsi
- Page 115 and 116: 1. Select Features � If necessary
- Page 117 and 118: 3. Dial the number � Using the nu
- Page 119 and 120: The standard memory in the fax mach
- Page 121 and 122: Fine (200 x 200 dpi) recommended fo
- Page 123 and 124: Dialing � Enter the first fax num
- Page 125 and 126: Dial pause [-] to pause between num
- Page 127 and 128: Line 1 select this option if Line 1
- Page 129 and 130: To add numbers to the Current Dial
- Page 131 and 132: Added Features (Fax) Quick Pathway
- Page 133 and 134: Transmission Report � Load the do
- Page 135 and 136: Delayed Start The following options
- Page 137 and 138: Advanced Features (Fax) Quick Pathw
- Page 139 and 140: Poll Remote Fax NOTE: Build Job can
� Load the documents in the<br />
document feeder.<br />
� Make the required feature<br />
selections.<br />
� Select [Output Format].<br />
� Select [Transparencies].<br />
Following the instructions,<br />
select the option required.<br />
� Load the transparency stock.<br />
� Programme [Change Tray<br />
Attributes]:<br />
•Select [Type]. Use the up /<br />
down scroll arrows to<br />
display the transparency<br />
option. Select<br />
[Transparency] and select<br />
[Save].<br />
•Select [Colour] then<br />
[Clear] and then [Save].<br />
� Select [Start].<br />
NOTE: A maximum quantity of<br />
1 can be selected.<br />
Page 3-34 <strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong>