Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
� To protect the document make a copy first. � Use the orange editing marker, draw around the areas to be printed, or draw a thick line through the areas. Press firmly on the edit marker. The line indicating the area to be printed must be dark, without any breaks. NOTE: There is no limit to the number of markings. � Place the marked copy on to the Document Glass. � Select [Added Features] and then [Image Adjustment]. � Select [Edit]. � Select [Area Edit]. � Select the option required and select [Save]. � Select [Start]. Area Edit (DC440/432) Page 3-30 Xerox Document Centre 440/432/420 User Guide
Area Edit options Off the feature is not available. Delete Inside scans everything outside the orange lines and ignores everything inside. The center area will be blank. Delete Outside scans everything inside the orange lines and ignores everything outside. The outside area will be blank. Centering (DC440/432) centres the image from inside the marker area onto the output paper. Areas outside the marker area are deleted. Inversion (DC440/432) changes all the black images within the marker area to white and all the white images to black. � Load the document in the Document Feeder or place it on the Document Glass. � Select [Added Features] and then [Image Adjustment]. � Select [Edit]. � Select [Page Edit]. � Select the option you want to use and select [Save]. � Select [Start]. Page Edit (DC440/432) This feature does not require the use of a marker pen, hence pre-scan is not required. The editing function selected will be applied to the entire page. The Document Glass or the Document Feeder can be used with Page Edit. Xerox Document Centre 440/432/420 User Guide Page 3-31 Copy
- Page 35 and 36: Envelope Tray Enables the printing
- Page 37 and 38: Power ON/OFF Powering On On the DC4
- Page 39 and 40: Powering Off When powering off the
- Page 41 and 42: Stand-by Mode Prior to entering Low
- Page 43 and 44: � Select [Machine Setups]. � Se
- Page 45 and 46: Modes Features button Job Status bu
- Page 47 and 48: Print Queue Maintains pending and a
- Page 49 and 50: Faults Displays a list of the six m
- Page 51 and 52: � Select [Machine Status]. � Se
- Page 53 and 54: Auditron Access Screen � Use the
- Page 55 and 56: Labels At point-of-need throughout
- Page 57 and 58: 3 Copy This chapter contains inform
- Page 59 and 60: � Before placing the documents in
- Page 61 and 62: Constant Velocity Transport Glass 2
- Page 63 and 64: 4. Enter the quantity � Use the n
- Page 65 and 66: Standard Features (Copy) Output Qui
- Page 67 and 68: 1,2,3. � Select and release the b
- Page 69 and 70: � With the documents face up, sli
- Page 71 and 72: Portrait Images Landscape Images. H
- Page 73 and 74: Paper Supply - Normal — reduces o
- Page 75 and 76: Image Quality options Text used for
- Page 77 and 78: Image Adjustment tab (Copy) � Sel
- Page 79 and 80: To produce size for size copies �
- Page 81 and 82: Bound Originals options Off the fea
- Page 83 and 84: Expert Image Quality � Select the
- Page 85: Edit (optional) Erase options Off n
- Page 89 and 90: Output Format (Copy) Quick Pathway
- Page 91 and 92: N Up (2 Up - DC420) Transparency op
- Page 93 and 94: Annotation � Load the documents.
- Page 95 and 96: � If Off is selected, select comm
- Page 97 and 98: Inserts � Load the insert stock i
- Page 99 and 100: � After the last entry has been m
- Page 101 and 102: � Select either [Front Only] or [
- Page 103 and 104: Job Assembly (Copy) Build Job Quick
- Page 105 and 106: Stored Jobs � Program the job fea
- Page 107 and 108: � Select [Added Features] and the
- Page 109 and 110: Name the name of the job. For copy
- Page 111 and 112: Use the scroll buttons to move thro
- Page 113 and 114: 4 Fax Sending and receiving a facsi
- Page 115 and 116: 1. Select Features � If necessary
- Page 117 and 118: 3. Dial the number � Using the nu
- Page 119 and 120: The standard memory in the fax mach
- Page 121 and 122: Fine (200 x 200 dpi) recommended fo
- Page 123 and 124: Dialing � Enter the first fax num
- Page 125 and 126: Dial pause [-] to pause between num
- Page 127 and 128: Line 1 select this option if Line 1
- Page 129 and 130: To add numbers to the Current Dial
- Page 131 and 132: Added Features (Fax) Quick Pathway
- Page 133 and 134: Transmission Report � Load the do
- Page 135 and 136: Delayed Start The following options
� To protect the document<br />
make a copy first.<br />
� Use the orange editing<br />
marker, draw around the<br />
areas to be printed, or draw a<br />
thick line through the areas.<br />
Press firmly on the edit<br />
marker. The line indicating<br />
the area to be printed must<br />
be dark, without any breaks.<br />
NOTE: There is no limit to the<br />
number of markings.<br />
� Place the marked copy on to<br />
the <strong>Document</strong> Glass.<br />
� Select [Added Features]<br />
and then [Image<br />
Adjustment].<br />
� Select [Edit].<br />
� Select [Area Edit].<br />
� Select the option required<br />
and select [Save].<br />
� Select [Start].<br />
Area Edit (DC<strong>440</strong>/<strong>432</strong>)<br />
Page 3-30 <strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong>