Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
� The touch screen displays the current timer value. Use the scroll buttons to apply the new setting and select [Save]. � Select [Close]. � Select [Exit]. The touch screen displays ‘Please wait...exit routine in progress’. After a few seconds the screen reverts to the standard display. The timer settings have now been changed. Recycled Paper The DC 440/432/420 has established performance with the use of recycled paper with its consequent benefits to the environment. Xerox recommends Xerox part number 3R5130 (8 1/2” x 11” size stock), a recycled paper with 20% post consumer content that can be obtained both through Xerox and many other office suppliers. The following paper is also available: - 3R94568 (A3 size, 80g/m2 500 sheets) 50% post consumer content - 3R91165 (A4 size, 80g/m2 500 sheets) 100% post consumer content - 3R91166 (A3 size, 80g/m2 500 sheets) 100% post consumer content The above is a small selection from a range of recycled media available from Xerox - including a variety of different sizes, weights and colors. Page 2-14 Xerox Document Centre 440/432/420 User Guide
Modes Features button Job Status button Machine Status button There are three modes available on the machine: - Features - Job Status - Machine Status. The mode buttons access the screens which enable users to select features, monitor the status of jobs on the machine and obtain general information about the DC440/432/420. NOTE: The features available will depend on the machine configuration. Xerox Document Centre 440/432/420 User Guide Page 2-15 Product Overview
- Page 1 and 2: Xerox Document Centre 440/432/420 U
- Page 3 and 4: Content 1 About This Guide ........
- Page 5 and 6: Annotation.........................
- Page 7 and 8: Delayed Start .....................
- Page 9 and 10: Expert Image Quality ..............
- Page 11 and 12: 1 About This Guide Welcome to the X
- Page 13 and 14: Conventions Orientation Long Edge F
- Page 15 and 16: Notes Hints Cautions Warnings Notes
- Page 17 and 18: Safety Notes Your Xerox product and
- Page 19 and 20: Safety Standards Never remove cover
- Page 21 and 22: FCC Part 68 Send Header Requirement
- Page 23 and 24: Canadian CSO3 The telephone company
- Page 25 and 26: The Center for Devices and Radiolog
- Page 27 and 28: Illegal Copying Congress, by statut
- Page 29 and 30: � Badges, identification cards, p
- Page 31 and 32: 2 Product Overview The Document Cen
- Page 33 and 34: Bypass Tray Touch Screen Left Front
- Page 35 and 36: Envelope Tray Enables the printing
- Page 37 and 38: Power ON/OFF Powering On On the DC4
- Page 39 and 40: Powering Off When powering off the
- Page 41 and 42: Stand-by Mode Prior to entering Low
- Page 43: � Select [Machine Setups]. � Se
- Page 47 and 48: Print Queue Maintains pending and a
- Page 49 and 50: Faults Displays a list of the six m
- Page 51 and 52: � Select [Machine Status]. � Se
- Page 53 and 54: Auditron Access Screen � Use the
- Page 55 and 56: Labels At point-of-need throughout
- Page 57 and 58: 3 Copy This chapter contains inform
- Page 59 and 60: � Before placing the documents in
- Page 61 and 62: Constant Velocity Transport Glass 2
- Page 63 and 64: 4. Enter the quantity � Use the n
- Page 65 and 66: Standard Features (Copy) Output Qui
- Page 67 and 68: 1,2,3. � Select and release the b
- Page 69 and 70: � With the documents face up, sli
- Page 71 and 72: Portrait Images Landscape Images. H
- Page 73 and 74: Paper Supply - Normal — reduces o
- Page 75 and 76: Image Quality options Text used for
- Page 77 and 78: Image Adjustment tab (Copy) � Sel
- Page 79 and 80: To produce size for size copies �
- Page 81 and 82: Bound Originals options Off the fea
- Page 83 and 84: Expert Image Quality � Select the
- Page 85 and 86: Edit (optional) Erase options Off n
- Page 87 and 88: Area Edit options Off the feature i
- Page 89 and 90: Output Format (Copy) Quick Pathway
- Page 91 and 92: N Up (2 Up - DC420) Transparency op
- Page 93 and 94: Annotation � Load the documents.
Modes<br />
Features button<br />
Job Status button<br />
Machine Status button<br />
There are three modes available on the machine:<br />
- Features<br />
- Job Status<br />
- Machine Status.<br />
The mode buttons access the screens which enable users to<br />
select features, monitor the status of jobs on the machine and<br />
obtain general information about the DC<strong>440</strong>/<strong>432</strong>/<strong>420</strong>.<br />
NOTE: The features available will depend on the machine<br />
configuration.<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 2-15<br />
Product Overview
Change language