Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
Power Save Modes Power Saver Indicator light The DC440/432/420 has energy saver features which significantly reduce the power consumption during periods of inactivity. The Power Saver Indicator is a light, located on the lower-left portion of the control panel. The Power Saver feature operates in three modes: - Stand-by - Low Power - Power Save (Auto Off/Sleep) Page 2-10 Xerox Document Centre 440/432/420 User Guide
Stand-by Mode Prior to entering Low Power or Power Save (Auto Off/Sleep), the machine is in Stand-by Mode whenever it is not copying/ printing a job. The touch screen is visible and ready to be programmed. Low Power Mode As delivered, the machine automatically switches into Low Power Mode 15 minutes after the last copy/print out. In this mode, the touch screen is blank and the Power Save light is on. To activate the machine, touch the touch screen or any button on the control panel or lift the platen glass cover. Should a fax or print job be received by the machine, automatic activation occurs. The machine responds within one second and all the features are available within 30 seconds. The factory default setting of 15 minutes is customer changeable within the range of 5 to 240 minutes. For more information refer to “Changing the Default Time Settings for Low Power and Power Save (Auto Off/Sleep) Modes” on page 2-12. Power Save (Auto Off/Sleep) Mode As delivered, the machine automatically switches into Power Save (Auto Off/Sleep) Mode, 60 minutes after the last copy/ print out. In this mode the copier version of the DC 420 switches the Power ON/OFF switch to the off position. Any stored jobs remain in the memory and the DC 420 returns to an operational condition when powered ON. In Power Save (Auto Off/Sleep) Mode on the copier/printer/fax version of the DC 420 and all DC 440/432 configurations, the touch screen is blank and the Power Save light is lit. To reactivate the machine, touch the touch screen or any button on the control panel or lift the platen glass cover. Should a fax or print job be received by the machine automatic activation occurs. Xerox Document Centre 440/432/420 User Guide Page 2-11 Product Overview
- Page 1 and 2: Xerox Document Centre 440/432/420 U
- Page 3 and 4: Content 1 About This Guide ........
- Page 5 and 6: Annotation.........................
- Page 7 and 8: Delayed Start .....................
- Page 9 and 10: Expert Image Quality ..............
- Page 11 and 12: 1 About This Guide Welcome to the X
- Page 13 and 14: Conventions Orientation Long Edge F
- Page 15 and 16: Notes Hints Cautions Warnings Notes
- Page 17 and 18: Safety Notes Your Xerox product and
- Page 19 and 20: Safety Standards Never remove cover
- Page 21 and 22: FCC Part 68 Send Header Requirement
- Page 23 and 24: Canadian CSO3 The telephone company
- Page 25 and 26: The Center for Devices and Radiolog
- Page 27 and 28: Illegal Copying Congress, by statut
- Page 29 and 30: � Badges, identification cards, p
- Page 31 and 32: 2 Product Overview The Document Cen
- Page 33 and 34: Bypass Tray Touch Screen Left Front
- Page 35 and 36: Envelope Tray Enables the printing
- Page 37 and 38: Power ON/OFF Powering On On the DC4
- Page 39: Powering Off When powering off the
- Page 43 and 44: � Select [Machine Setups]. � Se
- Page 45 and 46: Modes Features button Job Status bu
- Page 47 and 48: Print Queue Maintains pending and a
- Page 49 and 50: Faults Displays a list of the six m
- Page 51 and 52: � Select [Machine Status]. � Se
- Page 53 and 54: Auditron Access Screen � Use the
- Page 55 and 56: Labels At point-of-need throughout
- Page 57 and 58: 3 Copy This chapter contains inform
- Page 59 and 60: � Before placing the documents in
- Page 61 and 62: Constant Velocity Transport Glass 2
- Page 63 and 64: 4. Enter the quantity � Use the n
- Page 65 and 66: Standard Features (Copy) Output Qui
- Page 67 and 68: 1,2,3. � Select and release the b
- Page 69 and 70: � With the documents face up, sli
- Page 71 and 72: Portrait Images Landscape Images. H
- Page 73 and 74: Paper Supply - Normal — reduces o
- Page 75 and 76: Image Quality options Text used for
- Page 77 and 78: Image Adjustment tab (Copy) � Sel
- Page 79 and 80: To produce size for size copies �
- Page 81 and 82: Bound Originals options Off the fea
- Page 83 and 84: Expert Image Quality � Select the
- Page 85 and 86: Edit (optional) Erase options Off n
- Page 87 and 88: Area Edit options Off the feature i
- Page 89 and 90: Output Format (Copy) Quick Pathway
Power Save Modes<br />
Power Saver<br />
Indicator light<br />
The DC<strong>440</strong>/<strong>432</strong>/<strong>420</strong> has energy saver features which<br />
significantly reduce the power consumption during periods of<br />
inactivity. The Power Saver Indicator is a light, located on the<br />
lower-left portion of the control panel.<br />
The Power Saver feature operates in three modes:<br />
- Stand-by<br />
- Low Power<br />
- Power Save (Auto Off/Sleep)<br />
Page 2-10 <strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong>