Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
� Select [Pause Time]. � Select the scroll buttons to select a pause time in seconds. � Select [Redial Management]. Pause Time This feature sets the amount of time for dial pauses. Redial Management Redial Count sets the number of times the machine will automatically attempt a redial if a connection cannot be made. Redial Interval sets the time intervals in minutes between redials. NOTE: This feature is restricted in some areas. Page 10-60 Xerox Document Centre 440/432/420 User Guide
� Select [Redial Count]. � Select the scroll buttons to select the number of redial attempts. � Select [Save]. � Select [Redial Interval]. � Select the scroll buttons to select the elapsed time in minutes between redials. � Select [Save]. � Select [Line Monitor]. � Select [On] to enable this feature or [Off] to switch this feature off. � Select [Save] to continue. Line Monitor Line Monitor audibly monitors a transmission through the internal speaker until a connection is made. After connection, the line monitor is removed. Line Monitor Volume sets a default volume for line monitoring as High, Normal, or Low. Xerox Document Centre 440/432/420 User Guide Page 10-61 Setups
- Page 259 and 260: Date/Time Setup � Select [Date/Ti
- Page 261 and 262: Walkup Screen To change the default
- Page 263 and 264: Power Save/Sleep Mode (Auto Off/Sle
- Page 265 and 266: � Select [Localization. � Selec
- Page 267 and 268: Touch Screen Contrast � Select [T
- Page 269 and 270: Xerox Supplies Number / Supplies Te
- Page 271 and 272: Unavailable Features Some types of
- Page 273 and 274: Disabled Component Service/ Feature
- Page 275 and 276: Disabled Component Foreign Interfac
- Page 277 and 278: Disabled Component Service/ Feature
- Page 279 and 280: Copy Setups Quick Pathway �Select
- Page 281 and 282: . � Select [Normal]. � Use the
- Page 283 and 284: Output � Select [Output]. � Use
- Page 285 and 286: Expert Image Quality � Select [Ex
- Page 287 and 288: � Select [Edge Erase]. � Use th
- Page 289 and 290: � Select [Fax Setups]. Fax Termin
- Page 291 and 292: � Select [Local ID]. If more than
- Page 293 and 294: � Select the second [Company Logo
- Page 295 and 296: � Select [Duplex Printing]. � M
- Page 297 and 298: � Select [A3 x 11” x 17”].
- Page 299 and 300: � Select [Transmission Report].
- Page 301 and 302: � Select [Lighter/Darker]. � Us
- Page 303 and 304: Fax Mailboxes G3 like Super G3, thi
- Page 305 and 306: � Select [Delete Mailbox]. � Se
- Page 307 and 308: � Select [Files for Polling]. �
- Page 309: Outgoing Fax Options. � Select [O
- Page 313 and 314: Incoming Fax Options � Select any
- Page 315 and 316: � Select [Receive Header Print].
- Page 317 and 318: Auditron Setups Quick Pathway �Se
- Page 319 and 320: � Select the option required. - F
- Page 321 and 322: � Select [Internal Auditron]. �
- Page 323 and 324: � Select the account number to be
- Page 325 and 326: � Select [Account Summary]. � M
- Page 327 and 328: � Access Auditron Setups. � Sel
- Page 329 and 330: � Select [Add Account]. � Enter
- Page 331 and 332: � Select [Job Completion Setup].
- Page 333 and 334: � Access Auditron Setups. � Sel
- Page 335 and 336: Monitor without limits to set the d
- Page 337 and 338: Auditron No Setups (DC420) No N/A Y
- Page 339 and 340: � If necessary, select [Additiona
- Page 341 and 342: Scan to File Setups Quick Pathway
- Page 343 and 344: Print Setups Quick Pathway �Selec
- Page 345 and 346: PCL Setups Allows the System Admini
- Page 347 and 348: 11 Maintenance There will be times
- Page 349 and 350: Cleaning the DC440/432/420 Proper m
- Page 351 and 352: Replacing the Copy/Print Cartridge
- Page 353 and 354: � To open the Duplex Module door,
- Page 355 and 356: � Using the handle, lift the cart
- Page 357 and 358: � Close the Left Front Cover. NOT
- Page 359 and 360: � The staple cartridge is located
� Select [Redial Count].<br />
� Select the scroll buttons to<br />
select the number of redial<br />
attempts.<br />
� Select [Save].<br />
� Select [Redial Interval].<br />
� Select the scroll buttons to<br />
select the elapsed time in<br />
minutes between redials.<br />
� Select [Save].<br />
� Select [Line Monitor].<br />
� Select [On] to enable this<br />
feature or [Off] to switch this<br />
feature off.<br />
� Select [Save] to continue.<br />
Line Monitor<br />
Line Monitor audibly monitors a transmission through the internal speaker<br />
until a connection is made. After connection, the line monitor is<br />
removed.<br />
Line Monitor Volume sets a default volume for line monitoring as High, Normal, or<br />
Low.<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 10-61<br />
Setups