Xerox Document Centre 440/432/420 User Guide

More documents

Recommendations

Info

Erase (DC440/432) � If necessary, select [Additional Setups]. � Select [Erase]. � Select [Border Erase] or [Edge Erase] to change the settings - a description of each follows - or select [Off] to turn this feature off. � Make changes as required. � Select [Save]. � Select [Border Erase]. � Use the scroll buttons to set the default measurement for Border Erase between 0 and 50 mm. � Select [Save]. Programs the default settings for the Edge Erase and Border Erase features. The factory default is off for all the erase features with the erase values set to 0 inches. Border Erase (DC440/432) Page 10-36 Xerox Document Centre 440/432/420 User Guide
� Select [Edge Erase]. � Use the scroll buttons to set the default Edge Erase settings. � Select [Save]. � Select [Close] to exit Copy Setups. Edge Erase (DC440/432) Xerox Document Centre 440/432/420 User Guide Page 10-37 Setups
Page 1 and 2:
Xerox Document Centre 440/432/420 U
Page 3 and 4:
Content 1 About This Guide ........
Page 5 and 6:
Annotation.........................
Page 7 and 8:
Delayed Start .....................
Page 9 and 10:
Expert Image Quality ..............
Page 11 and 12:
1 About This Guide Welcome to the X
Page 13 and 14:
Conventions Orientation Long Edge F
Page 15 and 16:
Notes Hints Cautions Warnings Notes
Page 17 and 18:
Safety Notes Your Xerox product and
Page 19 and 20:
Safety Standards Never remove cover
Page 21 and 22:
FCC Part 68 Send Header Requirement
Page 23 and 24:
Canadian CSO3 The telephone company
Page 25 and 26:
The Center for Devices and Radiolog
Page 27 and 28:
Illegal Copying Congress, by statut
Page 29 and 30:
� Badges, identification cards, p
Page 31 and 32:
2 Product Overview The Document Cen
Page 33 and 34:
Bypass Tray Touch Screen Left Front
Page 35 and 36:
Envelope Tray Enables the printing
Page 37 and 38:
Power ON/OFF Powering On On the DC4
Page 39 and 40:
Powering Off When powering off the
Page 41 and 42:
Stand-by Mode Prior to entering Low
Page 43 and 44:
� Select [Machine Setups]. � Se
Page 45 and 46:
Modes Features button Job Status bu
Page 47 and 48:
Print Queue Maintains pending and a
Page 49 and 50:
Faults Displays a list of the six m
Page 51 and 52:
� Select [Machine Status]. � Se
Page 53 and 54:
Auditron Access Screen � Use the
Page 55 and 56:
Labels At point-of-need throughout
Page 57 and 58:
3 Copy This chapter contains inform
Page 59 and 60:
� Before placing the documents in
Page 61 and 62:
Constant Velocity Transport Glass 2
Page 63 and 64:
4. Enter the quantity � Use the n
Page 65 and 66:
Standard Features (Copy) Output Qui
Page 67 and 68:
1,2,3. � Select and release the b
Page 69 and 70:
� With the documents face up, sli
Page 71 and 72:
Portrait Images Landscape Images. H
Page 73 and 74:
Paper Supply - Normal — reduces o
Page 75 and 76:
Image Quality options Text used for
Page 77 and 78:
Image Adjustment tab (Copy) � Sel
Page 79 and 80:
To produce size for size copies �
Page 81 and 82:
Bound Originals options Off the fea
Page 83 and 84:
Expert Image Quality � Select the
Page 85 and 86:
Edit (optional) Erase options Off n
Page 87 and 88:
Area Edit options Off the feature i
Page 89 and 90:
Output Format (Copy) Quick Pathway
Page 91 and 92:
N Up (2 Up - DC420) Transparency op
Page 93 and 94:
Annotation � Load the documents.
Page 95 and 96:
� If Off is selected, select comm
Page 97 and 98:
Inserts � Load the insert stock i
Page 99 and 100:
� After the last entry has been m
Page 101 and 102:
� Select either [Front Only] or [
Page 103 and 104:
Job Assembly (Copy) Build Job Quick
Page 105 and 106:
Stored Jobs � Program the job fea
Page 107 and 108:
� Select [Added Features] and the
Page 109 and 110:
Name the name of the job. For copy
Page 111 and 112:
Use the scroll buttons to move thro
Page 113 and 114:
4 Fax Sending and receiving a facsi
Page 115 and 116:
1. Select Features � If necessary
Page 117 and 118:
3. Dial the number � Using the nu
Page 119 and 120:
The standard memory in the fax mach
Page 121 and 122:
Fine (200 x 200 dpi) recommended fo
Page 123 and 124:
Dialing � Enter the first fax num
Page 125 and 126:
Dial pause [-] to pause between num
Page 127 and 128:
Line 1 select this option if Line 1
Page 129 and 130:
To add numbers to the Current Dial
Page 131 and 132:
Added Features (Fax) Quick Pathway
Page 133 and 134:
Transmission Report � Load the do
Page 135 and 136:
Delayed Start The following options
Page 137 and 138:
Advanced Features (Fax) Quick Pathw
Page 139 and 140:
Poll Remote Fax NOTE: Build Job can
Page 141 and 142:
� Load the document. � Enter th
Page 143 and 144:
Fax Mailbox � Select [Added Featu
Page 145 and 146:
� Select [Added Features]. � Se
Page 147 and 148:
Reports & Setups (Fax) Quick Pathwa
Page 149 and 150:
Answer Mode � Select [Answer Mode
Page 151 and 152:
� Use the soft keypad to enter th
Page 153 and 154:
Maximum Store Width determines the
Page 155 and 156:
� Select [Dial Directory]. � Us
Page 157 and 158:
LAN Fax (Local Area Network Fax) LA
Page 159 and 160:
and is displayed on either the top
Page 161 and 162:
Type the job category, such as rece
Page 163 and 164:
5 Media Print Media Print allows a
Page 165 and 166:
� Select [Media Print]. � Selec
Page 167 and 168:
6 Scan to File The Scan option will
Page 169 and 170:
Scan to EMail (DC440/432) Quick Pat
Page 171 and 172:
Scan to File Quick Pathway �Selec
Page 173 and 174:
� Load the documents in the Docum
Page 175 and 176:
Added Features (Scan Setups) Quick
Page 177 and 178:
Basic Image Quality Adjusts the set
Page 179 and 180:
Reduce/Enlarge Adjusts the magnific
Page 181 and 182:
Erase Used to erase unwanted marks
Page 183 and 184:
Server IP Address /Server Name Docu
Page 185 and 186:
Filing Policy use to temporarily ch
Page 187 and 188:
the NEXTFRD.DAT file. The next scan
Page 189 and 190:
Scan to Fax (DC440/432)/Fax Setups(
Page 191 and 192:
Managing Scan Jobs Scan to File Que
Page 193 and 194:
Use the scroll buttons to move thro
Page 195 and 196:
7 Print When the Document Centre 44
Page 197 and 198:
placed at the end of the list of pe
Page 199 and 200:
Tower Mailbox If the Tower Mailbox
Page 201 and 202:
Type the type of job. For example,
Page 203 and 204:
Item the number in sequence for the
Page 205 and 206:
8 Internet Services Internet Servic
Page 207 and 208:
Function Action Services Tab Radio
Page 209 and 210:
Stored Templates Stored Templates a
Page 211 and 212:
Status Tab The Status tab allows us
Page 213 and 214:
Feature Name Action Connectivity: T
Page 215 and 216:
Maintenance Tab Maintenance provide
Page 217 and 218:
Scanning with Internet Services Pub
Page 219 and 220:
Template Services Services provide
Page 221 and 222:
Services Parameters Description Pri
Page 223 and 224:
Services Parameters Description Red
Page 225 and 226:
Template Operations Once a System A
Page 227 and 228:
selected and the hard copy document
Page 229 and 230:
Scan to Fax Scan with Local Copy To
Page 231 and 232:
9 Paper and other media The DC440/4
Page 233 and 234:
� Pull out the paper tray towards
Page 235 and 236: � Referring to the tray labels, l
Page 237 and 238: � Following the copier labels, lo
Page 239 and 240: � Pull open tray 1 and, holding t
Page 241 and 242: � Use the handle on the front to
Page 243 and 244: Storing and Handling Paper Always u
Page 245 and 246: 8 1/2” x 11” Letter Paper 8 1/2
Page 247 and 248: Media Use Specifications Preprinted
Page 249 and 250: Media Use Specifications Card stock
Page 251 and 252: 10 Setups The DC440/432/420 is desi
Page 253 and 254: Fax Setups enable the Fax specific
Page 255 and 256: � Select the button for the setup
Page 257 and 258: Access the Machine Setups � Selec
Page 259 and 260: Date/Time Setup � Select [Date/Ti
Page 261 and 262: Walkup Screen To change the default
Page 263 and 264: Power Save/Sleep Mode (Auto Off/Sle
Page 265 and 266: � Select [Localization. � Selec
Page 267 and 268: Touch Screen Contrast � Select [T
Page 269 and 270: Xerox Supplies Number / Supplies Te
Page 271 and 272: Unavailable Features Some types of
Page 273 and 274: Disabled Component Service/ Feature
Page 275 and 276: Disabled Component Foreign Interfac
Page 277 and 278: Disabled Component Service/ Feature
Page 279 and 280: Copy Setups Quick Pathway �Select
Page 281 and 282: . � Select [Normal]. � Use the
Page 283 and 284: Output � Select [Output]. � Use
Page 285: Expert Image Quality � Select [Ex
Page 289 and 290: � Select [Fax Setups]. Fax Termin
Page 291 and 292: � Select [Local ID]. If more than
Page 293 and 294: � Select the second [Company Logo
Page 295 and 296: � Select [Duplex Printing]. � M
Page 297 and 298: � Select [A3 x 11” x 17”].
Page 299 and 300: � Select [Transmission Report].
Page 301 and 302: � Select [Lighter/Darker]. � Us
Page 303 and 304: Fax Mailboxes G3 like Super G3, thi
Page 305 and 306: � Select [Delete Mailbox]. � Se
Page 307 and 308: � Select [Files for Polling]. �
Page 309 and 310: Outgoing Fax Options. � Select [O
Page 311 and 312: � Select [Redial Count]. � Sele
Page 313 and 314: Incoming Fax Options � Select any
Page 315 and 316: � Select [Receive Header Print].
Page 317 and 318: Auditron Setups Quick Pathway �Se
Page 319 and 320: � Select the option required. - F
Page 321 and 322: � Select [Internal Auditron]. �
Page 323 and 324: � Select the account number to be
Page 325 and 326: � Select [Account Summary]. � M
Page 327 and 328: � Access Auditron Setups. � Sel
Page 329 and 330: � Select [Add Account]. � Enter
Page 331 and 332: � Select [Job Completion Setup].
Page 333 and 334: � Access Auditron Setups. � Sel
Page 335 and 336: Monitor without limits to set the d
Page 337 and 338:
Auditron No Setups (DC420) No N/A Y
Page 339 and 340:
� If necessary, select [Additiona
Page 341 and 342:
Scan to File Setups Quick Pathway
Page 343 and 344:
Print Setups Quick Pathway �Selec
Page 345 and 346:
PCL Setups Allows the System Admini
Page 347 and 348:
11 Maintenance There will be times
Page 349 and 350:
Cleaning the DC440/432/420 Proper m
Page 351 and 352:
Replacing the Copy/Print Cartridge
Page 353 and 354:
� To open the Duplex Module door,
Page 355 and 356:
� Using the handle, lift the cart
Page 357 and 358:
� Close the Left Front Cover. NOT
Page 359 and 360:
� The staple cartridge is located
Page 361 and 362:
Convenience Stapler (optional) �
Page 363 and 364:
12 Problem Solving The DC440/432/42
Page 365 and 366:
Clearing Jams Media jams happen for
Page 367 and 368:
Symptom Recommendation The machine
Page 369 and 370:
Symptom Recommendation Paper someti
Page 371 and 372:
Symptom Recommendation Output is to
Page 373 and 374:
Symptom Recommendation Misfeeds in
Page 375 and 376:
Symptom Recommendation Can’t stor
Page 377 and 378:
Fault Codes and Messages Table of F
Page 379 and 380:
Code Description and Corrective Act
Page 381 and 382:
Call for Service procedure Xerox We
Page 383 and 384:
13 Specifications The DC440/432/420
Page 385 and 386:
Copier Speed from paper tray 1 DC42
Page 387 and 388:
Bypass Tray Capacity: 50 sheets of
Page 389 and 390:
Electrical Voltage: 102-140VAC Powe
Page 391 and 392:
Long Document Send/Receive Send: 36
Page 393 and 394:
14 Glossary This chapter contains a
Page 395 and 396:
Communication Mode (DC440/ 432) sel
Page 397 and 398:
Halftone gray patterns that are not
Page 399 and 400:
PDF Portable Document File. Peer-to
Page 401 and 402:
TIFF Tagged Image File Format Trans
Page 403 and 404:
15 Index Numerics 2 up, copy 3-35 A
Page 405 and 406:
etrieving a copy job 3-51 storing a
Page 407 and 408:
finisher specifications 13-6 forced
Page 409 and 410:
original type, fax 4-9 other media
Page 411 and 412:
add/modify accounts (DC440/432) 10-
Page 413 and 414:
T pause (stop) button 2-22 power sa
show all

Xerox Document Centre 440/432/420 User Guide

Create successful ePaper yourself

Delete template?

Save as template?