Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
Fault Override Accessing Fault Override When a fault occurs on the DC440/432/420, the Touch Screen displays step-by-step instructions for the walkup user to clear the fault. The instructions include contacting the Key Operator if the fault cannot be cleared. In this instance the Key Operator can enter their PIN to access the Fault Override screen and disable the faulty component. After the component is disabled, all features will be available except those that require the disabled component. Use Fault Override only if all other attempts to clear the fault have failed. Entering Fault Override Mode might require action to disable the faulted component, delete the faulted job, or both, depending on the type of job and fault. NOTE: Use caution when deleting a remote job - it may not be possible to re-create or resubmit the job. To access Fault Override Mode, a fault screen must currently be displayed on the Touch Screen. � Select [Access] � Select [#] and enter a PIN (Personal identification Number) with Key Operator access rights - see NOTE below. � Select [Confirm] to delete the current job and or disable the faulty component. NOTE: The default password - #22222 - may be used if PINs have not been assigned. Refer to “Access Rights” on page 10- 86 for more information. Page 10-20 Xerox Document Centre 440/432/420 User Guide
Unavailable Features Some types of jobs will not print if the disabled component is required for a default setup. In this case, the machine displays a prompt to check the setups. The following table contains details about specific features that are unavailable when a component is disabled. Disabled Component Service/ Feature Disabled Feature/Result Document Feeder Copy 2 Up, Booklet Creation, Sides Imaged 2 �1 or 2 � 2, or Mixed Size Originals in the DADF. Document Feeder Fax Sides Scanned Document Feeder Scan to File Sides Imaged Duplex Module Copy Booklet Creation, Sides Imaged 1�2 or 2 �2 Duplex Module Copy Setups, Sides Imaged, 1�2 Sided or 2 �2 Sided The machine will not print copy jobs if Duplex is disabled and Sides Imaged 1�2 or 2�2 are the default settings. The Sides Imaged button will not be displayed on the Touch Screen. Xerox Document Centre 440/432/420 User Guide Page 10-21 Setups
- Page 219 and 220: Template Services Services provide
- Page 221 and 222: Services Parameters Description Pri
- Page 223 and 224: Services Parameters Description Red
- Page 225 and 226: Template Operations Once a System A
- Page 227 and 228: selected and the hard copy document
- Page 229 and 230: Scan to Fax Scan with Local Copy To
- Page 231 and 232: 9 Paper and other media The DC440/4
- Page 233 and 234: � Pull out the paper tray towards
- Page 235 and 236: � Referring to the tray labels, l
- Page 237 and 238: � Following the copier labels, lo
- Page 239 and 240: � Pull open tray 1 and, holding t
- Page 241 and 242: � Use the handle on the front to
- Page 243 and 244: Storing and Handling Paper Always u
- Page 245 and 246: 8 1/2” x 11” Letter Paper 8 1/2
- Page 247 and 248: Media Use Specifications Preprinted
- Page 249 and 250: Media Use Specifications Card stock
- Page 251 and 252: 10 Setups The DC440/432/420 is desi
- Page 253 and 254: Fax Setups enable the Fax specific
- Page 255 and 256: � Select the button for the setup
- Page 257 and 258: Access the Machine Setups � Selec
- Page 259 and 260: Date/Time Setup � Select [Date/Ti
- Page 261 and 262: Walkup Screen To change the default
- Page 263 and 264: Power Save/Sleep Mode (Auto Off/Sle
- Page 265 and 266: � Select [Localization. � Selec
- Page 267 and 268: Touch Screen Contrast � Select [T
- Page 269: Xerox Supplies Number / Supplies Te
- Page 273 and 274: Disabled Component Service/ Feature
- Page 275 and 276: Disabled Component Foreign Interfac
- Page 277 and 278: Disabled Component Service/ Feature
- Page 279 and 280: Copy Setups Quick Pathway �Select
- Page 281 and 282: . � Select [Normal]. � Use the
- Page 283 and 284: Output � Select [Output]. � Use
- Page 285 and 286: Expert Image Quality � Select [Ex
- Page 287 and 288: � Select [Edge Erase]. � Use th
- Page 289 and 290: � Select [Fax Setups]. Fax Termin
- Page 291 and 292: � Select [Local ID]. If more than
- Page 293 and 294: � Select the second [Company Logo
- Page 295 and 296: � Select [Duplex Printing]. � M
- Page 297 and 298: � Select [A3 x 11” x 17”].
- Page 299 and 300: � Select [Transmission Report].
- Page 301 and 302: � Select [Lighter/Darker]. � Us
- Page 303 and 304: Fax Mailboxes G3 like Super G3, thi
- Page 305 and 306: � Select [Delete Mailbox]. � Se
- Page 307 and 308: � Select [Files for Polling]. �
- Page 309 and 310: Outgoing Fax Options. � Select [O
- Page 311 and 312: � Select [Redial Count]. � Sele
- Page 313 and 314: Incoming Fax Options � Select any
- Page 315 and 316: � Select [Receive Header Print].
- Page 317 and 318: Auditron Setups Quick Pathway �Se
- Page 319 and 320: � Select the option required. - F
Unavailable Features<br />
Some types of jobs will not print if the disabled component is<br />
required for a default setup. In this case, the machine displays<br />
a prompt to check the setups.<br />
The following table contains details about specific features that<br />
are unavailable when a component is disabled.<br />
Disabled<br />
Component<br />
Service/<br />
Feature<br />
Disabled<br />
Feature/Result<br />
<strong>Document</strong> Feeder Copy 2 Up, Booklet<br />
Creation, Sides<br />
Imaged 2 �1 or 2<br />
� 2, or Mixed Size<br />
Originals in the<br />
DADF.<br />
<strong>Document</strong> Feeder Fax Sides Scanned<br />
<strong>Document</strong> Feeder Scan to File Sides Imaged<br />
Duplex Module Copy Booklet Creation,<br />
Sides Imaged<br />
1�2 or<br />
2 �2<br />
Duplex Module Copy Setups,<br />
Sides Imaged,<br />
1�2 Sided or<br />
2 �2 Sided<br />
The machine will<br />
not print copy jobs<br />
if Duplex is<br />
disabled and<br />
Sides Imaged<br />
1�2 or 2�2 are<br />
the default<br />
settings. The<br />
Sides Imaged<br />
button will not be<br />
displayed on the<br />
Touch Screen.<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 10-21<br />
Setups
Change language