Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
Additional Setups � If necessary, select [Additional Setups]. � Select any button to change the setting - a description of each follows. � Make changes as required. � Select [Save]. Report Languages � Select [Report Languages]. � Select the language to use for printed reports. � Select [Close]. Various language options can be made available for printed reports. Please contact the Xerox representative for further information. Page 10-16 Xerox Document Centre 440/432/420 User Guide
Touch Screen Contrast � Select [Touch Screen Contrast]. � Use the up/down arrows to select a contrast level between 1 and 254. Alternatively, select the display window to change the setting using the pop-up keypad. The factory default is 127. � Select [Save]. Customer Support Number � Select [Customer Support Number]. � Use the numeric keypad on the screen to enter the Xerox Customer Support telephone number. � Select [Save]. When Machine Status is selected the machine displays the Xerox customer support telephone number. Typically, the correct number is entered by a Xerox representative when the machine is first installed. If it is not on the screen, or if it is incorrect, follow the instructions below to enter the correct number. Xerox Document Centre 440/432/420 User Guide Page 10-17 Setups
- Page 215 and 216: Maintenance Tab Maintenance provide
- Page 217 and 218: Scanning with Internet Services Pub
- Page 219 and 220: Template Services Services provide
- Page 221 and 222: Services Parameters Description Pri
- Page 223 and 224: Services Parameters Description Red
- Page 225 and 226: Template Operations Once a System A
- Page 227 and 228: selected and the hard copy document
- Page 229 and 230: Scan to Fax Scan with Local Copy To
- Page 231 and 232: 9 Paper and other media The DC440/4
- Page 233 and 234: � Pull out the paper tray towards
- Page 235 and 236: � Referring to the tray labels, l
- Page 237 and 238: � Following the copier labels, lo
- Page 239 and 240: � Pull open tray 1 and, holding t
- Page 241 and 242: � Use the handle on the front to
- Page 243 and 244: Storing and Handling Paper Always u
- Page 245 and 246: 8 1/2” x 11” Letter Paper 8 1/2
- Page 247 and 248: Media Use Specifications Preprinted
- Page 249 and 250: Media Use Specifications Card stock
- Page 251 and 252: 10 Setups The DC440/432/420 is desi
- Page 253 and 254: Fax Setups enable the Fax specific
- Page 255 and 256: � Select the button for the setup
- Page 257 and 258: Access the Machine Setups � Selec
- Page 259 and 260: Date/Time Setup � Select [Date/Ti
- Page 261 and 262: Walkup Screen To change the default
- Page 263 and 264: Power Save/Sleep Mode (Auto Off/Sle
- Page 265: � Select [Localization. � Selec
- Page 269 and 270: Xerox Supplies Number / Supplies Te
- Page 271 and 272: Unavailable Features Some types of
- Page 273 and 274: Disabled Component Service/ Feature
- Page 275 and 276: Disabled Component Foreign Interfac
- Page 277 and 278: Disabled Component Service/ Feature
- Page 279 and 280: Copy Setups Quick Pathway �Select
- Page 281 and 282: . � Select [Normal]. � Use the
- Page 283 and 284: Output � Select [Output]. � Use
- Page 285 and 286: Expert Image Quality � Select [Ex
- Page 287 and 288: � Select [Edge Erase]. � Use th
- Page 289 and 290: � Select [Fax Setups]. Fax Termin
- Page 291 and 292: � Select [Local ID]. If more than
- Page 293 and 294: � Select the second [Company Logo
- Page 295 and 296: � Select [Duplex Printing]. � M
- Page 297 and 298: � Select [A3 x 11” x 17”].
- Page 299 and 300: � Select [Transmission Report].
- Page 301 and 302: � Select [Lighter/Darker]. � Us
- Page 303 and 304: Fax Mailboxes G3 like Super G3, thi
- Page 305 and 306: � Select [Delete Mailbox]. � Se
- Page 307 and 308: � Select [Files for Polling]. �
- Page 309 and 310: Outgoing Fax Options. � Select [O
- Page 311 and 312: � Select [Redial Count]. � Sele
- Page 313 and 314: Incoming Fax Options � Select any
- Page 315 and 316: � Select [Receive Header Print].
Touch Screen Contrast<br />
� Select [Touch Screen<br />
Contrast].<br />
� Use the up/down arrows to<br />
select a contrast level<br />
between 1 and 254.<br />
Alternatively, select the<br />
display window to change the<br />
setting using the pop-up<br />
keypad. The factory default is<br />
127.<br />
� Select [Save].<br />
Customer Support Number<br />
� Select [Customer Support<br />
Number].<br />
� Use the numeric keypad on<br />
the screen to enter the <strong>Xerox</strong><br />
Customer Support telephone<br />
number.<br />
� Select [Save].<br />
When Machine Status is selected the machine displays the<br />
<strong>Xerox</strong> customer support telephone number. Typically, the<br />
correct number is entered by a <strong>Xerox</strong> representative when the<br />
machine is first installed. If it is not on the screen, or if it is<br />
incorrect, follow the instructions below to enter the correct<br />
number.<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 10-17<br />
Setups
Change language