Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
� Select [Auto Clear]. � Select [On] or [Off]. � If [On] is selected, use the scroll buttons to set the timeout period. � Select [Low Power]. � Use the scroll buttons to set the timeout period. Low Power Low Power Mode becomes active after the specified time of machine non-use. When activated, the Touch Screen is blank and the Power Saver light is on. When the Control Panel or Touch Screen is selected, or the Platen cover lifted, the machine responds within 1 second. All features are available within 30 seconds. NOTE: If the Low Power timeout is set higher than the timeout for Power Save or Auto Off (depending on system configuration), the machine displays a message that Low Power cannot exceed Power Save (or Auto Off). Page 10-12 Xerox Document Centre 440/432/420 User Guide
Power Save/Sleep Mode (Auto Off/Sleep) � Select [Power Save] or [Auto Off]. � Use the scroll buttons to select the desired timeout period. � Select [Save]. Contention Power Save (Auto Off) This function is dependant on the machine configuration. 60 minutes after the last copy or print out, the machine will automatically switch into Power Save/Sleep (Auto Off) Mode. If the DC420 is not connected to a network, the machine switches the Power ON/OFF switch to the off position. Any stored jobs remain in the memory and the DC420 returns to an operational condition when powered on. NOTE: If Low Power is set higher than Power Save/Auto Off, the machine displays a message that Low Power cannot exceed Power Save/Auto Off. � Select [Contention]. � Select any button to change the setting - a description of each follows. � Make changes as required. � Select [Save] to continue. Xerox Document Centre 440/432/420 User Guide Page 10-13 Setups
- Page 211 and 212: Status Tab The Status tab allows us
- Page 213 and 214: Feature Name Action Connectivity: T
- Page 215 and 216: Maintenance Tab Maintenance provide
- Page 217 and 218: Scanning with Internet Services Pub
- Page 219 and 220: Template Services Services provide
- Page 221 and 222: Services Parameters Description Pri
- Page 223 and 224: Services Parameters Description Red
- Page 225 and 226: Template Operations Once a System A
- Page 227 and 228: selected and the hard copy document
- Page 229 and 230: Scan to Fax Scan with Local Copy To
- Page 231 and 232: 9 Paper and other media The DC440/4
- Page 233 and 234: � Pull out the paper tray towards
- Page 235 and 236: � Referring to the tray labels, l
- Page 237 and 238: � Following the copier labels, lo
- Page 239 and 240: � Pull open tray 1 and, holding t
- Page 241 and 242: � Use the handle on the front to
- Page 243 and 244: Storing and Handling Paper Always u
- Page 245 and 246: 8 1/2” x 11” Letter Paper 8 1/2
- Page 247 and 248: Media Use Specifications Preprinted
- Page 249 and 250: Media Use Specifications Card stock
- Page 251 and 252: 10 Setups The DC440/432/420 is desi
- Page 253 and 254: Fax Setups enable the Fax specific
- Page 255 and 256: � Select the button for the setup
- Page 257 and 258: Access the Machine Setups � Selec
- Page 259 and 260: Date/Time Setup � Select [Date/Ti
- Page 261: Walkup Screen To change the default
- Page 265 and 266: � Select [Localization. � Selec
- Page 267 and 268: Touch Screen Contrast � Select [T
- Page 269 and 270: Xerox Supplies Number / Supplies Te
- Page 271 and 272: Unavailable Features Some types of
- Page 273 and 274: Disabled Component Service/ Feature
- Page 275 and 276: Disabled Component Foreign Interfac
- Page 277 and 278: Disabled Component Service/ Feature
- Page 279 and 280: Copy Setups Quick Pathway �Select
- Page 281 and 282: . � Select [Normal]. � Use the
- Page 283 and 284: Output � Select [Output]. � Use
- Page 285 and 286: Expert Image Quality � Select [Ex
- Page 287 and 288: � Select [Edge Erase]. � Use th
- Page 289 and 290: � Select [Fax Setups]. Fax Termin
- Page 291 and 292: � Select [Local ID]. If more than
- Page 293 and 294: � Select the second [Company Logo
- Page 295 and 296: � Select [Duplex Printing]. � M
- Page 297 and 298: � Select [A3 x 11” x 17”].
- Page 299 and 300: � Select [Transmission Report].
- Page 301 and 302: � Select [Lighter/Darker]. � Us
- Page 303 and 304: Fax Mailboxes G3 like Super G3, thi
- Page 305 and 306: � Select [Delete Mailbox]. � Se
- Page 307 and 308: � Select [Files for Polling]. �
- Page 309 and 310: Outgoing Fax Options. � Select [O
- Page 311 and 312: � Select [Redial Count]. � Sele
� Select [Auto Clear].<br />
� Select [On] or [Off].<br />
� If [On] is selected, use the<br />
scroll buttons to set the<br />
timeout period.<br />
� Select [Low Power].<br />
� Use the scroll buttons to set<br />
the timeout period.<br />
Low Power<br />
Low Power Mode becomes active after the specified time of<br />
machine non-use. When activated, the Touch Screen is blank<br />
and the Power Saver light is on. When the Control Panel or<br />
Touch Screen is selected, or the Platen cover lifted, the<br />
machine responds within 1 second. All features are available<br />
within 30 seconds.<br />
NOTE: If the Low Power timeout is set higher than the timeout<br />
for Power Save or Auto Off (depending on system<br />
configuration), the machine displays a message that Low<br />
Power cannot exceed Power Save (or Auto Off).<br />
Page 10-12 <strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong>