Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
Auto Tray Switching This feature has to be enabled on the machine. Contact the Key Operator for further assistance. Once enabled, if loading more than one tray with paper of the same size and type, the DC440/432/420 automatically switches from one tray to the other, if the active tray runs out of paper. This is called Auto Tray Switching. However, the DC440/432/420 will not automatically switch to a tray that contains a different size, type, or color of paper. HINT: On the DC440/432 the Bypass Tray can also be used with Auto Tray Switching. When not in use, the paper trays can be opened and paper can be loaded while the DC440/432/420 is running. However, do not open the active tray. This will cause the machine to stop. Page 9-12 Xerox Document Centre 440/432/420 User Guide
Storing and Handling Paper Always use high-quality, xerographic grade paper in the DC440/432/420. Damaged, curled, or damp paper can cause jams and image quality problems. Follow these simple rules to store paper: - Store paper in dry conditions, away from extreme heat or cold, such as radiators or open windows. - Store paper flat on a shelf or pallet above floor level. - Leave the paper wrapped and boxed until ready to be used. - Re-wrap partly used packages of paper. NOTE: Paper should not be stored in the paper trays. Xerox Document Centre 440/432/420 User Guide Page 9-13 Paper and other media
- Page 191 and 192: Managing Scan Jobs Scan to File Que
- Page 193 and 194: Use the scroll buttons to move thro
- Page 195 and 196: 7 Print When the Document Centre 44
- Page 197 and 198: placed at the end of the list of pe
- Page 199 and 200: Tower Mailbox If the Tower Mailbox
- Page 201 and 202: Type the type of job. For example,
- Page 203 and 204: Item the number in sequence for the
- Page 205 and 206: 8 Internet Services Internet Servic
- Page 207 and 208: Function Action Services Tab Radio
- Page 209 and 210: Stored Templates Stored Templates a
- Page 211 and 212: Status Tab The Status tab allows us
- Page 213 and 214: Feature Name Action Connectivity: T
- Page 215 and 216: Maintenance Tab Maintenance provide
- Page 217 and 218: Scanning with Internet Services Pub
- Page 219 and 220: Template Services Services provide
- Page 221 and 222: Services Parameters Description Pri
- Page 223 and 224: Services Parameters Description Red
- Page 225 and 226: Template Operations Once a System A
- Page 227 and 228: selected and the hard copy document
- Page 229 and 230: Scan to Fax Scan with Local Copy To
- Page 231 and 232: 9 Paper and other media The DC440/4
- Page 233 and 234: � Pull out the paper tray towards
- Page 235 and 236: � Referring to the tray labels, l
- Page 237 and 238: � Following the copier labels, lo
- Page 239 and 240: � Pull open tray 1 and, holding t
- Page 241: � Use the handle on the front to
- Page 245 and 246: 8 1/2” x 11” Letter Paper 8 1/2
- Page 247 and 248: Media Use Specifications Preprinted
- Page 249 and 250: Media Use Specifications Card stock
- Page 251 and 252: 10 Setups The DC440/432/420 is desi
- Page 253 and 254: Fax Setups enable the Fax specific
- Page 255 and 256: � Select the button for the setup
- Page 257 and 258: Access the Machine Setups � Selec
- Page 259 and 260: Date/Time Setup � Select [Date/Ti
- Page 261 and 262: Walkup Screen To change the default
- Page 263 and 264: Power Save/Sleep Mode (Auto Off/Sle
- Page 265 and 266: � Select [Localization. � Selec
- Page 267 and 268: Touch Screen Contrast � Select [T
- Page 269 and 270: Xerox Supplies Number / Supplies Te
- Page 271 and 272: Unavailable Features Some types of
- Page 273 and 274: Disabled Component Service/ Feature
- Page 275 and 276: Disabled Component Foreign Interfac
- Page 277 and 278: Disabled Component Service/ Feature
- Page 279 and 280: Copy Setups Quick Pathway �Select
- Page 281 and 282: . � Select [Normal]. � Use the
- Page 283 and 284: Output � Select [Output]. � Use
- Page 285 and 286: Expert Image Quality � Select [Ex
- Page 287 and 288: � Select [Edge Erase]. � Use th
- Page 289 and 290: � Select [Fax Setups]. Fax Termin
- Page 291 and 292: � Select [Local ID]. If more than
Auto Tray Switching<br />
This feature has to be enabled on the machine. Contact the<br />
Key Operator for further assistance.<br />
Once enabled, if loading more than one tray with paper of the<br />
same size and type, the DC<strong>440</strong>/<strong>432</strong>/<strong>420</strong> automatically<br />
switches from one tray to the other, if the active tray runs out of<br />
paper. This is called Auto Tray Switching. However, the<br />
DC<strong>440</strong>/<strong>432</strong>/<strong>420</strong> will not automatically switch to a tray that<br />
contains a different size, type, or color of paper.<br />
HINT: On the DC<strong>440</strong>/<strong>432</strong> the Bypass Tray can also be used<br />
with Auto Tray Switching.<br />
When not in use, the paper trays can be opened and paper can<br />
be loaded while the DC<strong>440</strong>/<strong>432</strong>/<strong>420</strong> is running. However, do<br />
not open the active tray. This will cause the machine to stop.<br />
Page 9-12 <strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong>
Change language