Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
� Slide the High Capacity Feeder and Finisher unit away from the machine. � Load the Bypass Tray as described on the previous page. � Slide the unit back to the machine. NOTE: If loading a different paper type or color, reprogram the features as required in Change Attributes. The Envelope Tray (optional) Bypass Tray with the High Capacity Tray and Finisher HINT: If unwrapping a new packet of paper with the seam side of the packet face up, turn the paper over when loading it in to the Bypass Tray. This prevents curled output. The Envelope Tray only fits in the Tray 1 position. A maximum of 70 envelopes of 24lb (substance 20) weight and any size envelope between 6.5” x 3.9” and 10” x 7” can be loaded. Mailing envelopes must be at least 4” wide and between 6” and 9.5” long. Reliable envelope sizes include 7 3/4”.. Reliable envelope styles include Standard Commercial. NOTE: Envelopes must only be copied single-sided. CAUTION: To prevent unnecessary damage to a tray after it has been removed always make sure that it is placed or stored on a smooth surface, for example a desk top. Page 9-8 Xerox Document Centre 440/432/420 User Guide
� Pull open tray 1 and, holding the tray on either side, gently lift the tray and remove it from the machine. � Insert the envelope tray. NOTE: When the envelope tray is inserted, the touch screen changes to display Envelope Tray Attributes. Select Confirm to accept the size shown or select Change Envelope Size to change the size. NOTE: The Envelope Tray can only be inserted in place of Tray 1. However, all 4 paper trays can be removed from the machine. Loading the Envelope Tray Xerox Document Centre 440/432/420 User Guide Page 9-9 Paper and other media
- Page 187 and 188: the NEXTFRD.DAT file. The next scan
- Page 189 and 190: Scan to Fax (DC440/432)/Fax Setups(
- Page 191 and 192: Managing Scan Jobs Scan to File Que
- Page 193 and 194: Use the scroll buttons to move thro
- Page 195 and 196: 7 Print When the Document Centre 44
- Page 197 and 198: placed at the end of the list of pe
- Page 199 and 200: Tower Mailbox If the Tower Mailbox
- Page 201 and 202: Type the type of job. For example,
- Page 203 and 204: Item the number in sequence for the
- Page 205 and 206: 8 Internet Services Internet Servic
- Page 207 and 208: Function Action Services Tab Radio
- Page 209 and 210: Stored Templates Stored Templates a
- Page 211 and 212: Status Tab The Status tab allows us
- Page 213 and 214: Feature Name Action Connectivity: T
- Page 215 and 216: Maintenance Tab Maintenance provide
- Page 217 and 218: Scanning with Internet Services Pub
- Page 219 and 220: Template Services Services provide
- Page 221 and 222: Services Parameters Description Pri
- Page 223 and 224: Services Parameters Description Red
- Page 225 and 226: Template Operations Once a System A
- Page 227 and 228: selected and the hard copy document
- Page 229 and 230: Scan to Fax Scan with Local Copy To
- Page 231 and 232: 9 Paper and other media The DC440/4
- Page 233 and 234: � Pull out the paper tray towards
- Page 235 and 236: � Referring to the tray labels, l
- Page 237: � Following the copier labels, lo
- Page 241 and 242: � Use the handle on the front to
- Page 243 and 244: Storing and Handling Paper Always u
- Page 245 and 246: 8 1/2” x 11” Letter Paper 8 1/2
- Page 247 and 248: Media Use Specifications Preprinted
- Page 249 and 250: Media Use Specifications Card stock
- Page 251 and 252: 10 Setups The DC440/432/420 is desi
- Page 253 and 254: Fax Setups enable the Fax specific
- Page 255 and 256: � Select the button for the setup
- Page 257 and 258: Access the Machine Setups � Selec
- Page 259 and 260: Date/Time Setup � Select [Date/Ti
- Page 261 and 262: Walkup Screen To change the default
- Page 263 and 264: Power Save/Sleep Mode (Auto Off/Sle
- Page 265 and 266: � Select [Localization. � Selec
- Page 267 and 268: Touch Screen Contrast � Select [T
- Page 269 and 270: Xerox Supplies Number / Supplies Te
- Page 271 and 272: Unavailable Features Some types of
- Page 273 and 274: Disabled Component Service/ Feature
- Page 275 and 276: Disabled Component Foreign Interfac
- Page 277 and 278: Disabled Component Service/ Feature
- Page 279 and 280: Copy Setups Quick Pathway �Select
- Page 281 and 282: . � Select [Normal]. � Use the
- Page 283 and 284: Output � Select [Output]. � Use
- Page 285 and 286: Expert Image Quality � Select [Ex
- Page 287 and 288: � Select [Edge Erase]. � Use th
� Pull open tray 1 and, holding<br />
the tray on either side, gently<br />
lift the tray and remove it from<br />
the machine.<br />
� Insert the envelope tray.<br />
NOTE: When the envelope tray<br />
is inserted, the touch screen<br />
changes to display Envelope<br />
Tray Attributes. Select Confirm<br />
to accept the size shown or<br />
select Change Envelope Size to<br />
change the size.<br />
NOTE: The Envelope Tray can only be inserted in place of<br />
Tray 1. However, all 4 paper trays can be removed from the<br />
machine.<br />
Loading the Envelope Tray<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 9-9<br />
Paper and other media