Xerox Document Centre 440/432/420 User Guide

� Slide the High Capacity
Feeder and Finisher unit
away from the machine.
� Load the Bypass Tray as
described on the previous
page.
� Slide the unit back to the
machine.
NOTE: If loading a different
paper type or color, reprogram
the features as required in
Change Attributes.
The Envelope Tray (optional)
Bypass Tray with the High Capacity Tray and
Finisher
HINT: If unwrapping a new packet of paper with the seam side
of the packet face up, turn the paper over when loading it in to
the Bypass Tray. This prevents curled output.
The Envelope Tray only fits in the Tray 1 position. A maximum
of 70 envelopes of 24lb (substance 20) weight and any size
envelope between 6.5” x 3.9” and 10” x 7” can be loaded.
Mailing envelopes must be at least 4” wide and between 6” and
9.5” long. Reliable envelope sizes include 7 3/4”.. Reliable
envelope styles include Standard Commercial.
NOTE: Envelopes must only be copied single-sided.
CAUTION: To prevent unnecessary damage to a tray after
it has been removed always make sure that it is placed or
stored on a smooth surface, for example a desk top.
Page 9-8 Xerox Document Centre 440/432/420 User Guide