Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
The Bypass Tray Paper can be loaded either short edge feed or long edge feed, however the default orientation is long edge feed. Long Edge Feed (LEF) Short Edge Feed (SEF) NOTE: Mixing paper standards can lead to image loss. The Bypass Tray can be used for a variety of different media stock. Refer to the table on page 9-14 for more information. The Bypass Tray is located on the left hand side of the machine, below the Left Tray. A tray extension, to accommodate larger paper, is provided. To change the attributes for the Bypass Tray, place the paper in the Bypass Tray. The tray senses the paper and the machine displays a confirmation pop-up window on the touch screen to change the attributes. NOTE: To reduce unnecessary fuser and paper feed jams it is important that the paper size, color and type programmed in the Change Attributes window for the Bypass Tray is identical to the paper stock loaded. To ensure excellent performance when loading stock of 32lbs or heavier, it is recommended that the Heavyweight option is selected as the Type in the Tray Attributes screen. Page 9-6 Xerox Document Centre 440/432/420 User Guide
� Following the copier labels, load the paper neatly into the bypass tray ensuring that the paper stack is registered to the front right hand corner. Take care not to fill the tray above the fill line. � Slide the rear guide towards the paper until it is just touching the edge of the stack. NOTE: If loading a different paper type or color, reprogram the features as required in Change Attributes. Bypass Tray with the Left Tray Xerox Document Centre 440/432/420 User Guide Page 9-7 Paper and other media
- Page 185 and 186: Filing Policy use to temporarily ch
- Page 187 and 188: the NEXTFRD.DAT file. The next scan
- Page 189 and 190: Scan to Fax (DC440/432)/Fax Setups(
- Page 191 and 192: Managing Scan Jobs Scan to File Que
- Page 193 and 194: Use the scroll buttons to move thro
- Page 195 and 196: 7 Print When the Document Centre 44
- Page 197 and 198: placed at the end of the list of pe
- Page 199 and 200: Tower Mailbox If the Tower Mailbox
- Page 201 and 202: Type the type of job. For example,
- Page 203 and 204: Item the number in sequence for the
- Page 205 and 206: 8 Internet Services Internet Servic
- Page 207 and 208: Function Action Services Tab Radio
- Page 209 and 210: Stored Templates Stored Templates a
- Page 211 and 212: Status Tab The Status tab allows us
- Page 213 and 214: Feature Name Action Connectivity: T
- Page 215 and 216: Maintenance Tab Maintenance provide
- Page 217 and 218: Scanning with Internet Services Pub
- Page 219 and 220: Template Services Services provide
- Page 221 and 222: Services Parameters Description Pri
- Page 223 and 224: Services Parameters Description Red
- Page 225 and 226: Template Operations Once a System A
- Page 227 and 228: selected and the hard copy document
- Page 229 and 230: Scan to Fax Scan with Local Copy To
- Page 231 and 232: 9 Paper and other media The DC440/4
- Page 233 and 234: � Pull out the paper tray towards
- Page 235: � Referring to the tray labels, l
- Page 239 and 240: � Pull open tray 1 and, holding t
- Page 241 and 242: � Use the handle on the front to
- Page 243 and 244: Storing and Handling Paper Always u
- Page 245 and 246: 8 1/2” x 11” Letter Paper 8 1/2
- Page 247 and 248: Media Use Specifications Preprinted
- Page 249 and 250: Media Use Specifications Card stock
- Page 251 and 252: 10 Setups The DC440/432/420 is desi
- Page 253 and 254: Fax Setups enable the Fax specific
- Page 255 and 256: � Select the button for the setup
- Page 257 and 258: Access the Machine Setups � Selec
- Page 259 and 260: Date/Time Setup � Select [Date/Ti
- Page 261 and 262: Walkup Screen To change the default
- Page 263 and 264: Power Save/Sleep Mode (Auto Off/Sle
- Page 265 and 266: � Select [Localization. � Selec
- Page 267 and 268: Touch Screen Contrast � Select [T
- Page 269 and 270: Xerox Supplies Number / Supplies Te
- Page 271 and 272: Unavailable Features Some types of
- Page 273 and 274: Disabled Component Service/ Feature
- Page 275 and 276: Disabled Component Foreign Interfac
- Page 277 and 278: Disabled Component Service/ Feature
- Page 279 and 280: Copy Setups Quick Pathway �Select
- Page 281 and 282: . � Select [Normal]. � Use the
- Page 283 and 284: Output � Select [Output]. � Use
- Page 285 and 286: Expert Image Quality � Select [Ex
� Following the copier labels,<br />
load the paper neatly into the<br />
bypass tray ensuring that the<br />
paper stack is registered to<br />
the front right hand corner.<br />
Take care not to fill the tray<br />
above the fill line.<br />
� Slide the rear guide towards<br />
the paper until it is just<br />
touching the edge of the<br />
stack.<br />
NOTE: If loading a different<br />
paper type or color, reprogram<br />
the features as required in<br />
Change Attributes.<br />
Bypass Tray with the Left Tray<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 9-7<br />
Paper and other media