Xerox Document Centre 440/432/420 User Guide

Image Options tab use to select a negative image, mirror image, or bitmap
smoothing for a document. This feature can also be used to
adjust the brightness, contrast, resolution, and magnification.
Use Auto Duplex for automatic rotation to take place on
double-sided jobs being printed onto hole-punched paper.
Draft Mode printing enables the document to be printed in a
reduced quality mode, which uses less dry ink.
Graphics mode selects specific options when printing graphics, for example
raster or vector.
PostScript tab use this screen to select the postscript output options and to
compress Bitmaps, which saves memory and enables faster
printing.
General tab prints a test page.
Details tab use to send print to a new port or a new network path, update
or change print drivers and select time-out settings.
Capture Settings tab enables selection of Capture Print Port, Form and Job (for
example banner, copies). Use to map or remove the mapping
to the network drive, change page dimensions and select a
banner page, number of copies etc.
Page 7-4 Xerox Document Centre 440/432/420 User Guide